From: SourceForge.net <no...@so...> - 2006-01-15 17:40:55
|
Bugs item #1403559, was opened at 2006-01-11 23:19 Message generated for change (Comment added) made by hfiguiere You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=108874&aid=1403559&group_id=8874 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: libgphoto2_port Group: None Status: Open Resolution: None Priority: 5 Submitted By: Donald Harter (dharter) Assigned to: Nobody/Anonymous (nobody) Summary: undefined symbol: usb_get_busses Initial Comment: [root@localhost tmp]# gphoto2 --auto-detect gphoto2: relocation error: /usr/local/lib/libgphoto2_port/0.5.2/usb.so: undefined symbol: usb_get_busses [root@localhost tmp]# gphoto2 --auto-detect gphoto2: relocation error: /usr/local/lib/libgphoto2_port/0.5.2/usb.so: undefined symbol: usb_get_busses I haven't been able to find where this symbol is defined. ---------------------------------------------------------------------- >Comment By: Hubert Figuiere (hfiguiere) Date: 2006-01-15 12:40 Message: Logged In: YES user_id=27487 what is your distro? because most distribution do that work for you. ---------------------------------------------------------------------- Comment By: Donald Harter (dharter) Date: 2006-01-15 11:26 Message: Logged In: YES user_id=66181 I installed it myself. I don't see any other versions installed. I had installed a package usbutils-0.11 previously. Perhaps there are some conflicting files. I will try to reinstall all the files. open("/usr/lib/libusb-0.1.so.4", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\20"..., 1024) = 1024 fstat64(3, {st_mode=S_IFREG|0755, st_size=27337, ...}) = 0 old_mmap(NULL, 22040, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40035000 mprotect(0x40039000, 5656, PROT_NONE) = 0 old_mmap(0x40039000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x4000) = 0x40039000 close(3) = 0 open("/proc/bus/usb", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 3 fstat64(3, {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 getdents64(0x3, 0x806bff8, 0x1000, 0x401a7070) = 136 close(3) = 0 open("/proc/bus/usb", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 3 fstat64(3, {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 getdents64(0x3, 0x806bff8, 0x1000, 0x401a7070) = 136 getdents64(0x3, 0x806bff8, 0x1000, 0x401a7070) = 0 close(3) = 0 open("/proc/bus/usb/001", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 3 : fstat64(3, {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 getdents64(0x3, 0x806bff8, 0x1000, 0x401a7070) = 72 open("/proc/bus/usb/001/001", O_RDONLY) = 4 read(4, "\22\1\0\1\t\0\0\10\0\0\0\0\0\0\0\2\1\1", 18) = 18 close(4) = 0 getdents64(0x3, 0x806bff8, 0x1000, 0x401a7070) = 0 close(3) = 0 open("/proc/bus/usb/001/001", O_RDWR) = 3 ioctl(3, USBDEVFS_CONTROL, 0xbfffc310) = 8 ioctl(3, USBDEVFS_CONTROL, 0xbfffc310) = 25 close(3) = 0 writev(2, [{"gphoto2", 7}, {": ", 2}, {"relocation error", 16}, {": ", 2}, {"/usr/local/lib/libgphoto2_port/0"..., 43}, {": ", 2}, {"undefi ned symbol: usb_get_busses", 32}, {"", 0}, {"", 0}, {"\n", 1}], 10) = 105 _exit(127) = ? (END) ---------------------------------------------------------------------- Comment By: Marcus Meissner (marcusmeissner) Date: 2006-01-12 03:28 Message: Logged In: YES user_id=48092 its in libusb, you likely need a newer version of it. how did you install? what distribution is this? ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=108874&aid=1403559&group_id=8874 |