From: SourceForge.net <no...@so...> - 2006-12-21 09:52:36
|
Feature Requests item #1618878, was opened at 2006-12-19 18:07 Message generated for change (Comment added) made by sielaff You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=358874&aid=1618878&group_id=8874 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: camera support Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Marco Sielaff (sielaff) Assigned to: Nobody/Anonymous (nobody) Summary: gphoto2 support for Kodak EasyShare V570? Initial Comment: Hello, Since the V550 is supported, is there any chance to have a support on the V570 camera (with has two lenses, which is very nice...)? Greetings, Marco ---------------------------------------------------------------------- >Comment By: Marco Sielaff (sielaff) Date: 2006-12-21 10:52 Message: Logged In: YES user_id=438521 Originator: YES The output of dmesg is usb 2-1: new full speed USB device using uhci_hcd and address 2 Also I have tried lsmod | grep hci ehci_hcd 31624 0 uhci_hcd 30224 0 usbcore 108760 5 usbserial,usbhid,ehci_hcd,uhci_hcd lsmod | grep usb usbserial 28008 0 usbhid 41312 0 usbcore 108760 5 usbserial,usbhid,ehci_hcd,uhci_hcd ---------------------------------------------------------------------- Comment By: Marcus Meissner (marcusmeissner) Date: 2006-12-21 09:03 Message: Logged In: YES user_id=48092 Originator: NO that lsusb -vv does not show the camera is a bad sign, likely not even the machine is recognizing it. What is in "dmesg" kerneloutput when you attach the camera? Perhaps there are errors. (Just run the "dmesg" command). ---------------------------------------------------------------------- Comment By: Marco Sielaff (sielaff) Date: 2006-12-21 07:05 Message: Logged In: YES user_id=438521 Originator: YES Do I have to add something in the library.c (camlibs/ptp2) like {"Kodak:V570", 0x040a, 0x0590, 0},? But with this unsigned shorts usb_vendor/product the camera was not found. (Suse 9.3 Kernel 2.6.11.4-21.15-default) ---------------------------------------------------------------------- Comment By: Marco Sielaff (sielaff) Date: 2006-12-20 11:32 Message: Logged In: YES user_id=438521 Originator: YES gphoto2 --auto-detect shows nothing (--list-ports shows the usb (and the ttysXX..) lsusb --vv with this camera attached shows nothing, too. With a Olympus FE-5500 both programms (lsusb and gphoto2) work. I have gphoto2 version 2.3 installed... ---------------------------------------------------------------------- Comment By: Marcus Meissner (marcusmeissner) Date: 2006-12-20 09:40 Message: Logged In: YES user_id=48092 Originator: NO gphoto2 --auto-detect will already work fine and detect it as USB PTP Camera. ---------------------------------------------------------------------- Comment By: Hubert Figuiere (hfiguiere) Date: 2006-12-19 18:30 Message: Logged In: YES user_id=27487 Originator: NO should work as is recognized as a generic PTP camera. what are the USB IDs? ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=358874&aid=1618878&group_id=8874 |