From: Daniel F. <def...@lb...> - 2011-08-31 16:01:41
|
Hi - Whenever I attempt to delete images from the card on the EOS 5D Mk II it says its going to delete them but hangs. Here is the sequence of commands I'm using on the mac: > killall PTPCamera > gphoto2 --set-config capture=on > gphoto2 --set-config capturetarget=1 > gphoto2 --get-config capturetarget Label: Capture Target Type: RADIO Current: Memory card Choice: 0 Internal RAM Choice: 1 Memory card > gphoto2 --capture-image --interval 3 --frames 3 Time-lapse mode enabled (interval: 3s). Capturing frame #1/3... New file is in location /store_00010001/DCIM/100EOS5D/IMG_0008.JPG on the camera Waiting for next capture slot 0 seconds... Capturing frame #2/3... New file is in location /store_00010001/DCIM/100EOS5D/IMG_0009.JPG on the camera Waiting for next capture slot 2 seconds... Capturing frame #3/3... New file is in location /store_00010001/DCIM/100EOS5D/IMG_0010.JPG on the camera > gphoto2 -f"/store_00010001/DCIM/100EOS5D" -L There are 3 files in folder '/store_00010001/DCIM/100EOS5D'. #1 IMG_0008.JPG rd 1417 KB 5616x3744 image/jpeg #2 IMG_0009.JPG rd 1341 KB 5616x3744 image/jpeg #3 IMG_0010.JPG rd 1409 KB 5616x3744 image/jpeg >gphoto2 -f"/store_00010001/DCIM/100EOS5D" -D Deleting 'IMG_0010.JPG' from folder '/store_00010001/DCIM/100EOS5D'... ... but just hangs and does not return - I have to ctrl-c a few times to make it respond ... > ^C Cancelling... > ^C Aborting... Aborted. Here is the version: > gphoto2 -v gphoto2 2.4.10 Copyright (c) 2000-2010 Lutz Mueller and others gphoto2 comes with NO WARRANTY, to the extent permitted by law. You may redistribute copies of gphoto2 under the terms of the GNU General Public License. For more information about these matters, see the files named COPYING. This version of gphoto2 is using the following software versions and options: gphoto2 2.4.10 /usr/bin/gcc-4.2, popt(m), exif, no cdk, no aa, jpeg, readline libgphoto2 2.4.11 /usr/bin/gcc-4.2, ltdl, EXIF libgphoto2_port 0.8.0 /usr/bin/gcc-4.2, ltdl, USB, serial without locking -Thanks! Daniel |