From: SourceForge.net <no...@so...> - 2010-08-10 21:06:17
|
Feature Requests item #3039388, was opened at 2010-08-04 12:34 Message generated for change (Comment added) made by marcusmeissner You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=358874&aid=3039388&group_id=8874 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: camera support Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: alfredo () Assigned to: Marcus Meissner (marcusmeissner) Summary: Olympus E-520 Initial Comment: gphoto2 --summary --debug --debug-logfile=xx.log > summary.log ---------------------------------------------------------------------- >Comment By: Marcus Meissner (marcusmeissner) Date: 2010-08-10 21:06 Message: sorry i was not fully clear. it needs a actual command to execute :) run: sudo gphoto2 --summary --debug --debug-logfile=xx.log so we see what went wrong during suymmary read ---------------------------------------------------------------------- Comment By: alfredo () Date: 2010-08-10 18:45 Message: I hope you understand ... before giving the command gphoto2 --debug --debug-logfile=xx.log I proceeded to delete the old files xx * ---------------------------------------------------------------------- Comment By: Marcus Meissner (marcusmeissner) Date: 2010-08-08 12:22 Message: are these done after clean attach ? some of them might be follow up errors. can you capture debugging output of one of them? appedn "--debug --debug-logfile=xx.log" to the gphoto2 command line . ---------------------------------------------------------------------- Comment By: alfredo () Date: 2010-08-07 21:18 Message: I noticed that the E-520 crashes and I have to remove the battery to start ---------------------------------------------------------------------- Comment By: alfredo () Date: 2010-08-07 21:14 Message: alfredo@AcerBox:~$ sudo gphoto2 --capture-image ERRORE: Could not capture image. *** Errore (-1: "Errore non specificato") *** Per ottenere messaggi di debug, usare l'opzione --debug. I messaggi di debug possono aiutare a risolvere i problemi incontrati. Se si ha intenzione di inviare errori o messaggi alla mailing list degli sviluppatori di gphoto <gph...@li...>, eseguire gphoto2 come segue: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image Please make sure there is sufficient quoting around the arguments. alfredo@AcerBox:~$ sudo gphoto2 --summary *** Errore *** le chiamate ricorsive non sono supportate dal driver sierra! Contattare <gph...@li...>. *** Errore *** le chiamate ricorsive non sono supportate dal driver sierra! Contattare <gph...@li...>. *** Errore *** le chiamate ricorsive non sono supportate dal driver sierra! Contattare <gph...@li...>. *** Errore *** le chiamate ricorsive non sono supportate dal driver sierra! Contattare <gph...@li...>. Sommario della fotocamera: Project-Id-Version: gphoto2 2.4.7 Report-Msgid-Bugs-To: gph...@li... POT-Creation-Date: 2010-04-11 15:59+0200 PO-Revision-Date: 2009-08-25 12:15+0100 Last-Translator: Marco Colombo <m.c...@ed...> Language-Team: Italian <tp...@li...> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=(n != 1) alfredo@AcerBox:~$ ---------------------------------------------------------------------- Comment By: Marcus Meissner (marcusmeissner) Date: 2010-08-07 21:06 Message: can you do sudo gphoto2 --capture-image instead of the --list-config? and sudo gphoto2 --summary ---------------------------------------------------------------------- Comment By: alfredo () Date: 2010-08-07 21:03 Message: alfredo@AcerBox:~$ sudo rmmod usb-storage alfredo@AcerBox:~$ sudo gphoto2 --list-config *** Errore *** le chiamate ricorsive non sono supportate dal driver sierra! Contattare <gph...@li...>. alfredo@AcerBox:~$ Translation: *** Error *** recursive calls are not supported by the sierra driver! Contact <gph...@li...>. ---------------------------------------------------------------------- Comment By: Marcus Meissner (marcusmeissner) Date: 2010-08-07 20:58 Message: as root it says "camera already in use" ... hmm. is it claimed by the mass storage driver? sudo rrmmod usb-storage sudo gphoto2 --list-config ---------------------------------------------------------------------- Comment By: alfredo () Date: 2010-08-07 20:56 Message: Sorry but I have problems with English. The texts are translated with Google, I hope you understand what I write ... Even with "sudo" returns the error. The data of my system are: Linux AcerBox 2.6.32-24-generic #39-Ubuntu SMP Wed Jul 28 05:14:15 UTC 2010 x86_64 GNU/Linux Ubuntu 10.04 - Lucid Lynx & Gnome 2.30.2 *** Error *** There was an error in the library I / O ("Unable to lock the device"): The camera is already in use. *** Error (-60: 'Could not lock the device') *** alfredo@AcerBox:~$ sudo gphoto2 --list-config *** Errore *** Si è verificato un errore nella libreria di I/O ("Impossibile bloccare il dispositivo"): La fotocamera è già in uso. *** Errore (-60: "Impossibile bloccare il dispositivo") *** Per ottenere messaggi di debug, usare l'opzione --debug. I messaggi di debug possono aiutare a risolvere i problemi incontrati. Se si ha intenzione di inviare errori o messaggi alla mailing list degli sviluppatori di gphoto <gph...@li...>, eseguire gphoto2 come segue: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --list-config Please make sure there is sufficient quoting around the arguments. alfredo@AcerBox:~$ env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --list-config *** Error *** An error occurred in the io-library ('Could not claim the USB device'): Could not claim interface 0 (Operation not permitted). Make sure no other program or kernel module (such as sdc2xx, stv680, spca50x) is using the device and you have read/write access to the device. *** Error (-53: 'Could not claim the USB device') *** alfredo@AcerBox:~$ env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --list-config *** Error *** An error occurred in the io-library ('Could not claim the USB device'): Could not claim interface 0 (Operation not permitted). Make sure no other program or kernel module (such as sdc2xx, stv680, spca50x) is using the device and you have read/write access to the device. *** Error (-53: 'Could not claim the USB device') *** alfredo@AcerBox:~$ sudo env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --list-config *** Error *** An error occurred in the io-library ('Could not lock the device'): Camera is already in use. *** Error (-60: 'Could not lock the device') *** ---------------------------------------------------------------------- Comment By: Marcus Meissner (marcusmeissner) Date: 2010-08-07 20:35 Message: i dont speak italian, but i think the error is the "no access rights" one. (the new ID needs to be in the udev / hal tablkes too) you can also try this as root, this should avoid the permission issue ---------------------------------------------------------------------- Comment By: alfredo () Date: 2010-08-07 20:33 Message: Camera "Control" alfredo@AcerBox:~$ lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 07b4:0110 Olympus Optical Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 064e:a101 Suyin Corp. Acer CrystalEye Webcam Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub alfredo@AcerBox:~$ gphoto2 --auto-detect Modello Porta ---------------------------------------------------------- Olympus E-520 usb: Olympus E-520 usb:002,004 alfredo@AcerBox:~$ gphoto2 --list-config *** Errore *** Si è verificato un errore nella libreria di I/O ("Impossibile reclamare il dispositivo USB"): Impossibile reclamare l'interfaccia 0 (Funzione non permessa). Assicurarsi che nessun altro programma o un modulo del kernel (come sdc2xx, stv680, spca50x) stia usando il device e che si abbia accesso in lettura e scrittura al device. *** Errore (-53: "Impossibile reclamare il dispositivo USB") *** Per ottenere messaggi di debug, usare l'opzione --debug. I messaggi di debug possono aiutare a risolvere i problemi incontrati. Se si ha intenzione di inviare errori o messaggi alla mailing list degli sviluppatori di gphoto <gph...@li...>, eseguire gphoto2 come segue: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --list-config Please make sure there is sufficient quoting around the arguments. alfredo@AcerBox:~$ gphoto2 -a Capacità della fotocamera : Olympus E-520 Supporto porta seriale : sì Supporto USB : sì Velocità di trasferimento gestite: : 9600 : 19200 : 38400 : 57600 : 115200 Scelte di cattura : : Immagine : Anteprima Supporto per la configurazione : sì Elimina file selezionati su fotocamera : sì Elimina tutti i file su fotocamera : sì Supporto per l'anteprima dei file: sì Supporto caricamento file : sì alfredo@AcerBox:~$ gphoto2 --capture-image *** Errore *** Si è verificato un errore nella libreria di I/O ("Impossibile reclamare il dispositivo USB"): Impossibile reclamare l'interfaccia 0 (Funzione non permessa). Assicurarsi che nessun altro programma o un modulo del kernel (come sdc2xx, stv680, spca50x) stia usando il device e che si abbia accesso in lettura e scrittura al device. ERRORE: Could not capture image. *** Errore (-53: "Impossibile reclamare il dispositivo USB") *** Per ottenere messaggi di debug, usare l'opzione --debug. I messaggi di debug possono aiutare a risolvere i problemi incontrati. Se si ha intenzione di inviare errori o messaggi alla mailing list degli sviluppatori di gphoto <gph...@li...>, eseguire gphoto2 come segue: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image Please make sure there is sufficient quoting around the arguments. alfredo@AcerBox:~$ gphoto2 --summary --debug --debug-logfile=xx.log > summary.log *** Errore *** Si è verificato un errore nella libreria di I/O ("Impossibile reclamare il dispositivo USB"): Impossibile reclamare l'interfaccia 0 (Funzione non permessa). Assicurarsi che nessun altro programma o un modulo del kernel (come sdc2xx, stv680, spca50x) stia usando il device e che si abbia accesso in lettura e scrittura al device. *** Errore (-53: "Impossibile reclamare il dispositivo USB") *** ---------------------------------------------------------------------- Comment By: Marcus Meissner (marcusmeissner) Date: 2010-08-07 11:34 Message: the 0x110 USB id was missing in the sierra driver. i have attached a patch for libgphoto2 2.4.9 for this, coul;d you rebuild libgphoto2 with it and test? ---------------------------------------------------------------------- Comment By: alfredo () Date: 2010-08-05 12:51 Message: alfredo@AcerBox:~$ gphoto2 --auto-detect Modello Porta ---------------------------------------------------------- ---------------------------------------------------------------------- Comment By: alfredo () Date: 2010-08-05 12:43 Message: DSRL connects to the PC via USB cable and the Olympus E-520 shows the menu of choice: I choose "control". This is the procedure with Windows. ---------------------------------------------------------------------- Comment By: alfredo () Date: 2010-08-05 12:42 Message: Collego la DSRL al PC tramite cavo USB e la Olympus E-520 mostra menu di scelta: scelgo "controllo". Questa è la procedura con Windows. Connect DSRL I gave the following commands: alfredo@AcerBox:~$ lsusb Bus 007 Device 003: ID 0a5c:2101 Broadcom Corp. A-Link BlueUsbA2 Bluetooth Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 006: ID 07b4:0110 Olympus Optical Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 064e:a101 Suyin Corp. Acer CrystalEye Webcam Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub alfredo@AcerBox:~$ gphoto2 --list-config *** Errore *** Impossibile rilevare alcuna fotocamera *** Errore (-105: "Modello sconosciuto") *** Per ottenere messaggi di debug, usare l'opzione --debug. I messaggi di debug possono aiutare a risolvere i problemi incontrati. Se si ha intenzione di inviare errori o messaggi alla mailing list degli sviluppatori di gphoto <gph...@li...>, eseguire gphoto2 come segue: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --list-config Please make sure there is sufficient quoting around the arguments. alfredo@AcerBox:~$ env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --list-config *** Error *** Could not detect any camera *** Error (-105: 'Unknown model') *** For debugging messages, please use the --debug option. Debugging messages may help finding a solution to your problem. If you intend to send any error or debug messages to the gphoto developer mailing list <gph...@li...>, please run gphoto2 as follows: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --debug --debug-logfile=my-logfile.txt --list-config Please make sure there is sufficient quoting around the arguments. alfredo@AcerBox:~$ gphoto2 --summary --debug --debug-logfile=xx.log > summary.log *** Errore *** Si è verificato un errore nella libreria di I/O ("Parametri non corretti"): Nessuna descrizione dell'errore disponibile *** Errore (-2: "Parametri non corretti") *** ---------------------------------------------------------------------- Comment By: Marcus Meissner (marcusmeissner) Date: 2010-08-05 11:02 Message: seems no capture in PTP mode. the xx.log file would be interesting too, if you can attach it. There is another mode, the "PC Control Mode" which needs to be entered for Olympus. Our documentation has: "Olympus 750 Ultra Zoom:\n" "(1) Olympus 750UZ has a USB PC Control mode. To switch\n" " into 'USB PC control mode', turn on the camera, open\n" " the memory card access door and then press and\n" " hold both the 'OK' and 'quickview' buttons until the\n" " camera control menu appears. Set it to control mode.\n" Something similar (opening the memory card housing, and pressing two buttons at once should get to this menu. It should be the same as for Windows. (if you can specify the exact how to for the e-520 it would help others too.) ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=358874&aid=3039388&group_id=8874 |