Menu
▾
▴
Re: [Flightgear-devel] Adjusting the Adjust View Distance
|
From: Alan T. <ajt...@v-...> - 2009-12-08 12:42:04
|
seconded Alan From: UltraZexe Zexeonyo Sent: Tuesday, December 08, 2009 11:31 AM To: fli...@li... Subject: [Flightgear-devel] Adjusting the Adjust View Distance Hi all, I'm very new to this and so forgive me for my abrupt and mailing. I was referred to this devel-list by Gijs as it may interest some of you. Adjusting the 'Adjust View Distance' I have a little different taste than others especially when it comes to the Point of View (POV) of the cockpit. Where most pilots like to fly with a POV of 70- 80, I like to use 120. However, there is one problem with this, using a POV @ 120 causes the cockpit to look very very far away, making it almost impossible to see the instruments, unless of course you zoom it back up to a POV of 80. But you can fly using a POV @ 120 with no problem by adjusting the 'Adjust View Distance' from the 'View' menu. Simply click the dial on the 'Forward/backward' and stop where you like. For some planes, this works very well, for others, it's a disaster. The issue: The Adjust View Distance dial is over-sensitive, if I want a view distance of '0', i would click on '0' but because it's so sensitive, I always over-shoot the '0' mark and always hit '1.0m' or '-0.9m'. The difference in view is dramatic and can be a major flying issue. The solution: The problem is that the dial has a minimum of (-100) to a maximum of (100). The range of it is too large. We need to change the range to a smaller workable range, a good minimum and maximum is (-5m) to (5m). You could change it to (-1m) to (1m) if you wanted to. Where to change these variables? Go to Flightgear/data/GUI/dialog/pilot_offset. In the minimum and maximum field type in the new numbers, (-5m) and (5m) for Left and right, Up and Down, and Forward and Backwards. Save and quit. If you want the Adjust View Distance even more specific, decrease the range, so a good range would be (-1m) to (1m). So, if the cockpit is too close or too far, but you don't want to change the POV, using the adjust view distance is a good way to solve the problem. Just make sure that the Adjust View Distance range is calibrated to your likings. I use (-1m) to (1m) to get the distance just right. If you have any questions feel free to contact me via email. -Zexe -------------------------------------------------------------------------------- Windows LiveT Hotmail is faster and more secure than ever. Learn more. -------------------------------------------------------------------------------- ------------------------------------------------------------------------------ Return on Information: Google Enterprise Search pays you back Get the facts. http://p.sf.net/sfu/google-dev2dev -------------------------------------------------------------------------------- _______________________________________________ Flightgear-devel mailing list Fli...@li... https://lists.sourceforge.net/lists/listinfo/flightgear-devel |