[Docutils-checkins] SF.net SVN: docutils:[7655] trunk/docutils/docutils/utils/punctuation_chars .py

[<mi...@us...>]

Revision: 7655
          http://sourceforge.net/p/docutils/code/7655
Author:   milde
Date:     2013-04-28 21:57:03 +0000 (Sun, 28 Apr 2013)
Log Message:
-----------
Literal definition of character sets with backslash escapes instead of utf8.

Modified Paths:
--------------
    trunk/docutils/docutils/utils/punctuation_chars.py

Modified: trunk/docutils/docutils/utils/punctuation_chars.py
===================================================================
--- trunk/docutils/docutils/utils/punctuation_chars.py	2013-04-24 21:39:43 UTC (rev 7654)
+++ trunk/docutils/docutils/utils/punctuation_chars.py	2013-04-28 21:57:03 UTC (rev 7655)
@@ -23,23 +23,62 @@
 # (states.py)
 #
 # .. _inline markup recognition rules:
-#     ../../../docs/ref/rst/restructuredtext.html#inline-markup
+#     ../../docs/ref/rst/restructuredtext.html#inline-markup
 
 # Docutils punctuation category sample strings
 # --------------------------------------------
 #
 # The sample strings are generated by punctuation_samples() and put here
-# literal to avoid the time-consuming generation with every Docutils run. As
-# the samples are used in regular expressions, special characters are escaped.
-# ::
+# literal to avoid the time-consuming generation with every Docutils run.
+# As the samples are used inside ``[ ]`` in regular expressions, hyphen and
+# square brackets are escaped. ::
 
-openers = ur"""\"\'\(\<\[\{༺༼᚛⁅⁽₍〈❨❪❬❮❰❲❴⟅⟦⟨⟪⟬⟮⦃⦅⦇⦉⦋⦍⦏⦑⦓⦕⦗⧘⧚⧼⸢⸤⸦⸨〈《「『【〔〖〘〚〝〝﴾︗︵︷︹︻︽︿﹁﹃﹇﹙﹛﹝（［｛｟｢«‘“‹⸂⸄⸉⸌⸜⸠‚„»’”›⸃⸅⸊⸍⸝⸡‛‟"""
-closers = ur"""\"\'\)\>\]\}༻༽᚜⁆⁾₎〉❩❫❭❯❱❳❵⟆⟧⟩⟫⟭⟯⦄⦆⦈⦊⦌⦎⦐⦒⦔⦖⦘⧙⧛⧽⸣⸥⸧⸩〉》」』】〕〗〙〛〞〟﴿︘︶︸︺︼︾﹀﹂﹄﹈﹚﹜﹞）］｝｠｣»’”›⸃⸅⸊⸍⸝⸡‛‟«‘“‹⸂⸄⸉⸌⸜⸠‚„"""
-delimiters = ur"\-\/\:֊־᐀᠆‐‑‒–—―⸗⸚〜〰゠︱︲﹘﹣－¡·¿;·՚՛՜՝՞՟։׀׃׆׳״؉؊،؍؛؞؟٪٫٬٭۔܀܁܂܃܄܅܆܇܈܉܊܋܌܍߷߸߹࠰࠱࠲࠳࠴࠵࠶࠷࠸࠹࠺࠻࠼࠽࠾।॥॰෴๏๚๛༄༅༆༇༈༉༊་༌།༎༏༐༑༒྅࿐࿑࿒࿓࿔၊။၌၍၎၏჻፡።፣፤፥፦፧፨᙭᙮᛫᛬᛭᜵᜶។៕៖៘៙៚᠀᠁᠂᠃᠄᠅᠇᠈᠉᠊᥄᥅᧞᧟᨞᨟᪠᪡᪢᪣᪤᪥᪦᪨᪩᪪᪫᪬᪭᭚᭛᭜᭝᭞᭟᭠᰻᰼᰽᰾᰿᱾᱿᳓‖‗†‡•‣․‥…‧‰‱′″‴‵‶‷‸※‼‽‾⁁⁂⁃⁇⁈⁉⁊⁋⁌⁍⁎⁏⁐⁑⁓⁕⁖⁗⁘⁙⁚⁛⁜⁝⁞⳹⳺⳻⳼⳾⳿⸀⸁⸆⸇⸈⸋⸎⸏⸐⸑⸒⸓⸔⸕⸖⸘⸙⸛⸞⸟⸪⸫⸬⸭⸮⸰⸱、。〃〽・꓾꓿꘍꘎꘏꙳꙾꛲꛳꛴꛵꛶꛷꡴꡵꡶꡷꣎꣏꣸꣹꣺꤮꤯꥟꧁꧂꧃꧄꧅꧆꧇꧈꧉꧊꧋꧌꧍꧞꧟꩜꩝꩞꩟꫞꫟꯫︐︑︒︓︔︕︖︙︰﹅﹆﹉﹊﹋﹌﹐﹑﹒﹔﹕﹖﹗﹟﹠﹡﹨﹪﹫！＂＃％＆＇＊，．／：；？＠＼｡､･𐄀𐄁𐎟𐏐𐡗𐤟𐤿𐩐𐩑𐩒𐩓𐩔𐩕𐩖𐩗𐩘𐩿𐬹𐬺𐬻𐬼𐬽𐬾𐬿𑂻𑂼𑂾𑂿𑃀𑃁𒑰𒑱𒑲𒑳"
-closing_delimiters = ur"\.\,\;\!\?"
+openers = (u'"\'(<\\[{\u0f3a\u0f3c\u169b\u2045\u207d\u208d\u2329\u2768'
+           u'\u276a\u276c\u276e\u2770\u2772\u2774\u27c5\u27e6\u27e8\u27ea'
+           u'\u27ec\u27ee\u2983\u2985\u2987\u2989\u298b\u298d\u298f\u2991'
+           u'\u2993\u2995\u2997\u29d8\u29da\u29fc\u2e22\u2e24\u2e26\u2e28'
+           u'\u3008\u300a\u300c\u300e\u3010\u3014\u3016\u3018\u301a\u301d'
+           u'\u301d\ufd3e\ufe17\ufe35\ufe37\ufe39\ufe3b\ufe3d\ufe3f\ufe41'
+           u'\ufe43\ufe47\ufe59\ufe5b\ufe5d\uff08\uff3b\uff5b\uff5f\uff62'
+           u'\xab\u2018\u201c\u2039\u2e02\u2e04\u2e09\u2e0c\u2e1c\u2e20'
+           u'\u201a\u201e\xbb\u2019\u201d\u203a\u2e03\u2e05\u2e0a\u2e0d'
+           u'\u2e1d\u2e21\u201b\u201f')
+closers = (u'"\')>\\]}\u0f3b\u0f3d\u169c\u2046\u207e\u208e\u232a\u2769'
+           u'\u276b\u276d\u276f\u2771\u2773\u2775\u27c6\u27e7\u27e9\u27eb'
+           u'\u27ed\u27ef\u2984\u2986\u2988\u298a\u298c\u298e\u2990\u2992'
+           u'\u2994\u2996\u2998\u29d9\u29db\u29fd\u2e23\u2e25\u2e27\u2e29'
+           u'\u3009\u300b\u300d\u300f\u3011\u3015\u3017\u3019\u301b\u301e'
+           u'\u301f\ufd3f\ufe18\ufe36\ufe38\ufe3a\ufe3c\ufe3e\ufe40\ufe42'
+           u'\ufe44\ufe48\ufe5a\ufe5c\ufe5e\uff09\uff3d\uff5d\uff60\uff63'
+           u'\xbb\u2019\u201d\u203a\u2e03\u2e05\u2e0a\u2e0d\u2e1d\u2e21'
+           u'\u201b\u201f\xab\u2018\u201c\u2039\u2e02\u2e04\u2e09\u2e0c'
+           u'\u2e1c\u2e20\u201a\u201e')
+delimiters = (u'\\-/:\u058a\xa1\xb7\xbf\u037e\u0387\u055a-\u055f\u0589'
+              u'\u05be\u05c0\u05c3\u05c6\u05f3\u05f4\u0609\u060a\u060c'
+              u'\u060d\u061b\u061e\u061f\u066a-\u066d\u06d4\u0700-\u070d'
+              u'\u07f7-\u07f9\u0830-\u083e\u0964\u0965\u0970\u0df4\u0e4f'
+              u'\u0e5a\u0e5b\u0f04-\u0f12\u0f85\u0fd0-\u0fd4\u104a-\u104f'
+              u'\u10fb\u1361-\u1368\u1400\u166d\u166e\u16eb-\u16ed\u1735'
+              u'\u1736\u17d4-\u17d6\u17d8-\u17da\u1800-\u180a\u1944\u1945'
+              u'\u19de\u19df\u1a1e\u1a1f\u1aa0-\u1aa6\u1aa8-\u1aad\u1b5a-'
+              u'\u1b60\u1c3b-\u1c3f\u1c7e\u1c7f\u1cd3\u2010-\u2017\u2020-'
+              u'\u2027\u2030-\u2038\u203b-\u203e\u2041-\u2043\u2047-'
+              u'\u2051\u2053\u2055-\u205e\u2cf9-\u2cfc\u2cfe\u2cff\u2e00'
+              u'\u2e01\u2e06-\u2e08\u2e0b\u2e0e-\u2e1b\u2e1e\u2e1f\u2e2a-'
+              u'\u2e2e\u2e30\u2e31\u3001-\u3003\u301c\u3030\u303d\u30a0'
+              u'\u30fb\ua4fe\ua4ff\ua60d-\ua60f\ua673\ua67e\ua6f2-\ua6f7'
+              u'\ua874-\ua877\ua8ce\ua8cf\ua8f8-\ua8fa\ua92e\ua92f\ua95f'
+              u'\ua9c1-\ua9cd\ua9de\ua9df\uaa5c-\uaa5f\uaade\uaadf\uabeb'
+              u'\ufe10-\ufe16\ufe19\ufe30-\ufe32\ufe45\ufe46\ufe49-\ufe4c'
+              u'\ufe50-\ufe52\ufe54-\ufe58\ufe5f-\ufe61\ufe63\ufe68\ufe6a'
+              u'\ufe6b\uff01-\uff03\uff05-\uff07\uff0a\uff0c-\uff0f\uff1a'
+              u'\uff1b\uff1f\uff20\uff3c\uff61\uff64\uff65\U00010100'
+              u'\U00010101\U0001039f\U000103d0\U00010857\U0001091f\U0001093f'
+              u'\U00010a50-\U00010a58\U00010a7f\U00010b39-\U00010b3f'
+              u'\U000110bb\U000110bc\U000110be-\U000110c1\U00012470-'
+              u'\U00012473')
+closing_delimiters = u'\\\\.,;!?'
 
-
-
 # Matching open/close quotes
 # --------------------------
 
@@ -152,56 +191,110 @@
         # The Docutils character categories
         # ---------------------------------
         #
-        # The categorization of ASCII chars is non-standard to reduce both
-        # false positives and need for escaping. (see `inline markup recognition
-        # rules`_)
+        # The categorization of ASCII chars is non-standard to reduce
+        # both false positives and need for escaping. (see `inline markup
+        # recognition rules`_)
 
         # allowed before markup if there is a matching closer
-        openers = [re.escape('"\'(<[{')]
+        openers = [u'"\'(<\\[{']
         for cat in ('Ps', 'Pi', 'Pf'):
             openers.extend(ucharlists[cat])
 
         # allowed after markup if there is a matching opener
-        closers = [re.escape('"\')>]}')]
+        closers = [u'"\')>\\]}']
         for cat in ('Pe', 'Pf', 'Pi'):
             closers.extend(ucharlists[cat])
 
         # non-matching, allowed on both sides
-        delimiters = [re.escape('-/:')]
+        delimiters = [u'\\-/:']
         for cat in ('Pd', 'Po'):
             delimiters.extend(ucharlists[cat])
 
         # non-matching, after markup
-        closing_delimiters = [re.escape('.,;!?')]
+        closing_delimiters = [r'\\.,;!?']
 
         # # Test open/close matching:
         # for i in range(min(len(openers),len(closers))):
         #     print '%4d    %s    %s' % (i, openers[i].encode('utf8'),
         #                                closers[i].encode('utf8'))
 
-        return [u''.join(chars)
-                for chars in (openers, closers, delimiters, closing_delimiters)]
+        return [u''.join(chars) for chars in (openers, closers, delimiters,
+                                              closing_delimiters)]
 
 
+    def mark_intervals(s):
+        """Return s with shortcut notation for runs of consecutive characters
+
+        Sort string and replace 'cdef' by 'c-f' and similar.
+        """
+        l =[]
+        s = [ord(ch) for ch in s]
+        s.sort()
+        for n in s:
+            try:
+                if l[-1][-1]+1 == n:
+                    l[-1].append(n)
+                else:
+                    l.append([n])
+            except IndexError:
+                l.append([n])
+
+        l2 = []
+        for i in l:
+            i = [unichr(n) for n in i]
+            if len(i) > 2:
+                i = i[0], u'-', i[-1]
+            l2.extend(i)
+
+        return ''.join(l2)
+
+    def wrap_string(s, startstring= "(",
+                       endstring = ")", wrap=65):
+        """Line-wrap a unicode string literal definition."""
+        c = len(startstring)
+        contstring = "'\n" + ' ' * len(startstring) + "u'"
+        l = [startstring]
+        for ch in s:
+            c += 1
+            if ch == '\\' and c > wrap:
+                c = len(startstring)
+                ch = contstring + ch
+            l.append(ch)
+        l.append(endstring)
+        return ''.join(l)
+
+
 # print results
 # =============
 
 # (re) create and compare the samples:
 
     (o, c, d, cd) = punctuation_samples()
+    d_sorted = d[:5] + mark_intervals(d[5:])
     if o != openers:
         print '- openers = ur"""%s"""' % openers.encode('utf8')
         print '+ openers = ur"""%s"""' % o.encode('utf8')
     if c != closers:
         print '- closers = ur"""%s"""' % closers.encode('utf8')
         print '+ closers = ur"""%s"""' % c.encode('utf8')
-    if d != delimiters:
+    if d_sorted != delimiters:
         print '- delimiters = ur"%s"' % delimiters.encode('utf8')
         print '+ delimiters = ur"%s"' % d.encode('utf8')
     if cd != closing_delimiters:
         print '- closing_delimiters = ur"%s"' % closing_delimiters.encode('utf8')
         print '+ closing_delimiters = ur"%s"' % cd.encode('utf8')
 
+
+# Print literal code to define the character sets:
+
+    # `openers` and `closers` must be verbose and keep order because they are
+    # also used in `match_chars()`.
+    print wrap_string(repr(o), startstring= "openers = (")
+    print wrap_string(repr(c), startstring= "closers = (")
+    # delimiters: sort and use shortcut for intervals (saves ~150 characters):
+    print wrap_string(repr(d_sorted), startstring= "delimiters = (")
+    print 'closing_delimiters =', repr(cd)
+
 # test prints
 
     # print 'openers = ', repr(openers)
@@ -209,7 +302,6 @@
     # print 'delimiters = ', repr(delimiters)
     # print 'closing_delimiters = ', repr(closing_delimiters)
 
-
     # ucharlists = unicode_charlists(unicode_punctuation_categories)
     # for cat, chars in ucharlists.items():
     #     # print cat, chars
@@ -218,15 +310,15 @@
 
 # verbose print
 
-    print 'openers:'
-    for ch in openers:
-        print ch.encode('utf8'), unicodedata.name(ch)
-    print 'closers:'
-    for ch in closers:
-        print ch.encode('utf8'), unicodedata.name(ch)
-    print 'delimiters:'
-    for ch in delimiters:
-        print ch.encode('utf8'), unicodedata.name(ch)
-    print 'closing_delimiters:'
-    for ch in closing_delimiters:
-        print ch.encode('utf8'), unicodedata.name(ch)
+    # print 'openers:'
+    # for ch in openers:
+    #     print ch.encode('utf8'), unicodedata.name(ch)
+    # print 'closers:'
+    # for ch in closers:
+    #     print ch.encode('utf8'), unicodedata.name(ch)
+    # print 'delimiters:'
+    # for ch in delimiters:
+    #     print ch.encode('utf8'), unicodedata.name(ch)
+    # print 'closing_delimiters:'
+    # for ch in closing_delimiters:
+    #     print ch.encode('utf8'), unicodedata.name(ch)

This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.