Activity for Wilfried Hennings
-
Wilfried Hennings posted a comment on discussion General Discussion
Hi Sam, I also tested your setting with open camera on a ZTE Blade V9 (Android 8.1). The zooming in doesn't occur here. This device only has the old camera API. Also the zooming in doesn't occur in Galaxy A14 (Android 14). I followed the link to stackoverflow, and I agree to what is written there, i.e. the "Hardware vendors dictate how to handle the size and aspect ratio differences between the raw camera sensor resolution, the requested preview view and video capture sizes, and the subsequent processing...
-
Hi Sam, I tested your setting with open camera on a Samsung Galaxy S22. The zooming in doesn't occur here. Neither in original API nor in Camera2 API.
-
hi, (I am the poster of the original post, but I cannot change the "anonymous" post to my account) we have a Samsung galaxy S20FE and a Samsung galaxy S22+. In both Smartphones, in open camera only the UW (ultra wide angle) and standard camera can be chosen in the open camera app. Not the tele (3x) camera, which however can be chosen in Samsung's camera app. Do I miss a setting?
-
hi, we have a Samsung galaxy S20FE and a Samsung galaxy S22+. In both Smartphones, in open camera only the UW (ultra wide angle) and standard camera can be chosen in the open camera app. Not the tele (3x) camera, which however can be chosen in Samsung's camera app. Do I miss a setting?
-
binaries in the latest release tarball
-
binaries in the latest release tarball
-
you are right! I just replaced the tarball by latex2rtf-2.3.18a.tar.gz which should not contain the binaries any more.
-
r1266 also added support for user defined counters accessed through \the<counter>
-
adding hebrew.cfg
-
PLEASE do not append YOUR question to an already closed case!!! PLEASE read the instructions carefully. Support requests will NOT be answered. Use the mailing list instead.
-
In the MS Windows version, the tab "About" of the GUI clearly sais that it is distributed under the GNU public license. Furthermore, the file "copyright.txt" which is installed in the program folder lists all relating licenses. In the Unix version the same information is in the file "Copyright" in the source code folder. So what is the problem?
-
\bigcup translated as intersection
-
Good catch. The codes of bigcap and bigcup are mixed up. For a quick fix, open the file direct.cfg in the cfg folder of the latex2rtf installation with a text editor and change line 40 \bigcap,{\u8899}. to \bigcap,{\u8898}. and line 42 \bigcup,{\u8898}. to \bigcup,{\u8899}.
-
reverting unwanted deletes
-
updating Changelog
-
add missing source files utf8_support.c, utf8_support.h, proof.c, proof.h, test/html.sty
-
updating source files for release 2.3.17
-
adding support for non-ascii characters in verbatim blocks
-
updated documentation (Linux uninstall)
-
updated documentation (Linux uninstall)
-
updated documentation (Linux uninstall)
-
Tikz support is broken
-
Windows introduced a "convert" command, ImageMagick in turn changed its calling syntax from "convert" to "magick convert". After updating this in the latex2png script, latex2rtf is able to process the tex file in the tikz-test.tgz (.tar.gz) archive. Will be changed in the next release.
-
Windows introduced a "convert" command, ImageMagick in turn changed its calling syntax from "convert" to "magick convert". After updating this in the latex2png script, latex2rtf is able to process the tex file in the tikz-test.tgz (.tar.gz) archive.
-
updated Russian translation for l2rshell
-
committing updated README
-
patch: fixed comments for newer latex2rtf in ukrainian.cfg
-
Thank you for this patch. It is included in release 2.3.16.
-
committing updated l2rshell files
-
in l2rshell.cpp, added check for buffer overflow
-
fixed ukrainian.cfg
-
updated version info for l2rshell
-
fixed bug when \int was followed by \frac
-
fixed bug when \int was followed by \left or \r...
-
fixed bug in main.c line 368: comparison change...
-
fixed bug in main.c line 368: comparison change...
-
Error in main.c
-
You are right. However when compiled for MS WIndows, "==" does not detect equality...
-
WH:
-
WH:
-
Since rtf2latex2e was programmed, Microsoft has issued new versions of MSWord, which...
-
fails to convert specific rtf file
-
It seems that MS added new elements to the rtf syntax. rtf2latex2e does not know...
-
WH: add missing newline after display equation end
-
I just added the option to use \(…\) as the delimiters for inline equations and also...
-
Add option to use \(…\) as inline equation delimiter
-
I just added the option to use (…) as the delimiters for inline equations and also...
-
WH: add option to delimit LaTeX equations by \(...
-
I have simulated grounding at each load with a resistance of 10 Ohms like this: Set...
-
Hello, the resistance of a conductor increases with the temperature by 0.39% per...
-
Hello all, I am modelling the effect of single phase loads and generators on a three...
-
make checkdir fails
-
Thank you for pointing this out. I uploaded a new tarball 2.3.11a which contains...
-
WH: Fix memory leaks which could cause address ...
-
"Maybe the terminology is a little different." This is indeed one source of problems,...
-
"Maybe the terminology is a little different." This is indeed one source of problems....
-
"Maybe the terminology is a little different." This is indeed one source of problems....
-
"Maybe the terminology is a little different." This is indeed one source of problems....
-
"Maybe the terminology is a little different." This is indeed one source of problems....
-
The manual reads: Mvasc3= 3-phase short circuit MVA= kVBase^2/Zsc Question: In which...
-
The manual reads: Mvasc3= 3-phase short circuit MVA= kVBase^2/Zsc Question: In which...
-
OK, thank you! I decided to specify R1 X1 R0 X0, which are (hopefully) unambiguous....
-
The manual reads: Mvasc3= 3-phase short circuit MVA= kVBase^2 / Zsc Question: In...
-
I don't know whether 1. self-locating and 2. automake would be possible. It may or...
-
Hello, is it possible to use the same multi column csv file for more than one loadshape?...
-
in funct1.c line 1797 added "%s" format
-
Thank you for pointing this out. Corrected Web Pages are online.
-
Broken support link on latex2rtf website
-
Thank you very much! The clue was to NOT specify the dimension of MyVariantArray...
-
Hello, after performing the yearly calculation I want to read the monitor channel...
-
Hello, after performing the yearly calculation I want to read the monitor channel...
-
Thank you very much, that works. I have another question on reading monitored data...
-
Hello, I'm simulating a house with a photovoltaic device, a load, and a battery storage....
-
Thank you, now the voltages ARE updated, even without "MyMeters.Sample".
-
It seems to me that the line type specified in your linecode is inadequate for such...
-
It seems to me that the line type specified in your linecode is inadequate for such...
-
It seems to me that line type specified in your linecode is inadequate for such long...
-
It seems to me that line type specified in your linecode is inadequate for such long...
-
As I wrote, the MONITORs return the correct values, whereas AllBusVmag (which to...
-
As I wrote, the MONITORs return the correct values, whereas AllBusVmag (which to...
-
Hello and thank you for all your help so far. If my script with daily loadshapes...
-
Hello and thank you for all your help so far. If my script with daily loadshapes...
-
Update: The loadshapes are followed, but the voltages in OpenDSSengine.DSS.ActiveCircuit.AllBusVmag...
-
What about my post of 2015-04-29 "awaiting moderation"?
-
Hi, I want to get time series of the circuit voltages via Excel VBA. With Mode=Time,...
-
Hi, I want to get time series of the circuit voltages via Excel VBA. With Mode=Time,...
-
Thank you again! I will start using the COM interface with Excel VBA.
-
Thank you very much, now it works. Is there a way to plot the ranges (or min and...
-
I am trying go get a profile plot but the plot shows only the lines of the upper...
-
I am trying go get a profile plot but the plot shows only the lines of the upper...
-
I am trying go get a profile plot but the plot shows only the lines of the upper...
-
Just for the records, if someone else should find this thread: The mentioned error...
-
I see. Thank you very much for the clarification.
-
Thank you for the reply. Setting the limits for the load object doesn't work, neither...
-
Thank you for the reply. Setting the limits for the load object doesn't work, neither...
-
Thank you for the reply. Setting the limits for the load object don't work, neither...
-
I'm trying to run the Matlab script OpenDSS\Examples\Matlab\MiscExamples.m in GNU...
-
I started a new thread on this subject in the help forum https://sourceforge.net...
-
I already asked in the beginners forum at https://sourceforge.net/p/electricdss/discussion/beginners/thread/74f3ed97/...
-
Thank you for the answer. However, as I wrote, the undervoltage detection seems not...
1 >