Lenny

If i disable the push buttons i can connect to 273 via bluetooth?

I cant get the bluetooth test program to work but im not sure if im using it right . I connect to port 5 on the serial monitor which is my bluetooth port i can see that the device is connected in the bluetooth settings but when i type and send nothing appears on the monitor. I cant explain why 273 dosent work either comparing the logging it seems to connect ok and sends the 02 query but seens to immediatly time out waiting on the response, where 271 gets the response. I will go over all the hardware...

Robert, Just on the bluetooth conection with verison 2.73 i cannot get it to connect no matter what i set the delay and serial read time out too. I have attched both sketches im using. I can only seem to connect with 2.71.

Thanks Robert i did enable bluetooth but i never set the delay i will go back and double check that as for the probe issue when i run the temp test i get the output shown in the attached image and with no probe connected i get no probe obviously the wiring of the probe is good and the pins meter out ok the resistor measures at 4.65kohm its the output in the attached image that makes me think that there is a response its just not decoded? correctly

Hi Robert, Thank you for the reply, I cant get version 2.73 or 2.72 to connect with bluetooth, 2.71 is the only version that will connect for me. I have attched the log file it will include the error connecting with bluetooth on verison 2.73 and it will have the result frm the get Temp command using sw version 2.71. I am using the latest window app on windows 10. Kind Regards, Lenny.

Hi there, Im having an issue with my temp probe. Im getting no reading on the LCD display and when i run the test program for the temp probe the serial monitor just keeps outputing jibberish characters , they keep repeating so im assuming this is the test program trying to repeatedly output the temp . if i leave the probe disconnected and run the test programe then it ouputs 'No probe connected' as exepected. I have tried a second probe and the test program result is the same. I have verified the...

I have a different issue with bulb mode on windows. I'm not sure if you have any...