AnyCasting Alternatives

Professional tools for modeling and optimizing metal casting processes with the ability to predict the formation of defects in cast parts. - Filling Dynamics - Macro and Microporosity - Residual Stresses - Deformations and Warping - Cracks (Hot and Cold) - Hydrostatic Pressure - Mold Wear - Slag Formation PoligonSoft provides reliable simulations that prevent waste and costly redesigns, allowing manufacturers to "get it right" the first time. The core of PoligonSoft includes three calculation systems: hydrodynamic, thermal, and stress. Along with a set of additional options, it allows the simulation of all traditional casting technologies and many special processes. At PoligonSoft, all stages of the casting production process can be sequentially simulated: mold heating, mold filling with molten mass, solidification on the bench or in the thermostat, extraction of the cast part from the mold, cutting of the feeding system and risers, etc.

Capture the power of natural solidification thermal analyses within an affordable and capable software package. CAPlite features a step-by-step graphical interface, making it ideal even for those not experienced in casting software. Starting with a CAD design, CAPlite guides you through every step, from meshing to post-processing. Natural solidifications are effective thermal simulation that gives results within minutes. From die casting to sand casting, CAPlite can identify problems for all casting types. The simplicity of natural solidifications enables them to augment your entire casting operation at every stage: design risers, gating, and chill configurations to identify defects, or simply help visualize the otherwise abstract process of solidification. CAPlite comes with the power of natural solidifications plus more to give you the tools you need to improve your castings at a fraction of the cost.

MAGMASOFT ® is a comprehensive and effective optimization tool for improving metal casting quality, optimizing process conditions, and reducing production costs. Consequently utilizing the methodology of virtual Design of Experiments and Autonomous Optimization, robust process parameters and optimized casting layouts can be established for all cast materials and processes including heat treatment and melt metallurgy – efficiently and comprehensively at the same time. By means of autonomous engineering™, simulations with MAGMASOFT ® can be used in an automated virtual test plan to pursue different quality and cost objectives simultaneously. Broad knowledge and tangible hands-on instructions/measures are generated considering design and process conditions for mold filling, solidification, and cooling. The range of results comprises residual stresses and distortion, microstructure formation, and local properties.

SoftCAST™ is a multi-award-winning metal-casting-simulation software package for foundries and investment-casting facilities. SoftCAST™ allows engineers to simulate the behavior of the casting process during manufacture, which is often used to predict, in a virtual world, potential casting defects and quality issues within the cast part. The design modules in SoftCAST™ facilitate the easy development of both new products and new processes, and it provides options for the optimization of existing products and processes. The SoftCAST™ program is suitable for mass production, batch production, and jobbing lines. It has the capability to simulate a variety of casting complexities, including single- and multi-cavity mold designs, low to very high-weight castings, and cast sections whose thickness has no limit. The major differentiator between SoftCAST™ and our competitors’ products is that not only is SoftCAST™ a simulation program but it also has its own method design modules.

The software makes it possible to quickly and accurately analyze your manufacturing process, from the initial casting to the end of solidification. Thus, you anticipate manufacturing defects allowing you to produce high-quality components and reduce the prototyping phase. In extremely competitive and ever-changing markets, simulation is now an essential step in the development cycle of high-value cast parts. THERCAST® offers a complete and modular solution which will be able to provide you with valuable support for the production of ingots, castings or even continuous casting. THERCAST® integrates liquid/solid thermomechanical coupling involved in material transformation. With this implementation, you can study all types of phenomena: ladle and tundish flow, primary and secondary cooling, deformation in contact with rollers and spray-induced cooling. THERCAST® offers a multilingual graphical interface and a business-oriented work environment.

A quick and easy casting simulation software that will help you start simulating your castings in no time. NovaOne is NovaCast’s elementary collection of casting simulation tools, streamlined to meet the essential demands of specific processes. NovaOne is a slim version of our premium casting simulation system, NovaFlow&Solid.NovaOne Gravity is an innovative casting process simulation tool that simulates mold filling and solidification. With NovaOne Gravity, you can simulate gravity sand casting, gravity permanent mold, and lost wax method. NovaOne HPD can simulate both cold- and hot-chamber methods. It is possible to simulate more or less all commercial materials used for high-pressure die casting like aluminum alloys and zinc alloys.

Ansys Sherlock is the only reliability physics-based electronics design tool that provides fast and accurate life predictions for electronic hardware at the component, board and system levels in early stage design. Ansys Sherlock automated design analysis provides fast and accurate life predictions for electronic hardware at the component, board and system levels in early design stages. Sherlock bypasses the ‘test-fail-fix-repeat’ cycle by empowering designers to accurately model silicon–metal layers, semiconductor packaging, printed circuit boards (PCBs) and assemblies to predict failure risks due to thermal, mechanical and manufacturing stressors--all before prototype. With embedded libraries containing over 500,000 parts, Sherlock rapidly converts electronic computer-aided design (ECAD) files into computational fluid dynamics (CFD) and finite element analysis (FEA) models. Each model contains accurate geometries, material properties and translates stress information.

Your first off-tool parts are finally available, only for you to realize they contain pinholes, shrinkage, or hot spots. With your deadline staring you in the face, you can either ship the parts and undoubtedly deal with an unhappy customer or go back to the design stage and try to identify the problem, correct it, and hope it is finally free from defects. And because the trial period in the casting development schedule is underestimated, it is imperative to get your gating design to be robust against process variations before arriving at the testing phase. With ESI ProCAST you can cast your parts right the first time, every time –meeting your deadlines and never wasting money on scrap parts or late redesigns. For decades, customers have relied upon ProCAST as their go-to tool for the casting basics – filling, solidification, and porosity prediction. With its finite element technology, it also predicts complex issues like deformations and residual stresses.

ColdStream is a cloud-native thermal simulation engineering platform that supports your entire thermal management and cooling design process, from thermal analysis to thermal design. Diabatix's thermal simulation software lets your business speed up product development using only state-of-the-art technologies. Get essential heat transfer analyses and insights into temperature distribution, heat dissipation, fluid flow, thermal resistance, thermal radiation, cooling capacity, and more. Do not spend more time looking for the best-suited heat sinks to cool your electronic devices and products, let ColdStream do this for you. You can upload the geometry, configure the thermal simulation operating conditions, and set up the design objectives of your heat sinks in just a few clicks.

MSC Nastran is a multidisciplinary structural analysis application used by engineers to perform static, dynamic, and thermal analysis across the linear and nonlinear domains, complemented with automated structural optimization and award winning embedded fatigue analysis technologies, all enabled by high performance computing. Engineers use MSC Nastran to ensure structural systems have the necessary strength, stiffness, and life to preclude failure (excess stresses, resonance, buckling, or detrimental deformations) that may compromise structural function and safety. MSC Nastran is also used to improve the economy and passenger comfort of structural designs. Optimize the performance of existing designs or develop unique product differentiators, leading to industry advantages over competitors. Remedy structural issues that may occur during a product’s service, reducing downtime and costs.

Simulate the complete range of heat transfer phenomena, from convection to radiation, storage to dissipation, and steady-state to dynamic and transient environmental influences. TAITherm thermal analysis software is as easy to use as it is powerful. It solves for solar and thermal radiation, convection, and conduction, including ever-changing environments. TAITherm removes the burden of complicated thermal simulations and ensures that your design will function optimally in real-world scenarios. TAITherm is used by thousands of engineers and teams around the globe. Our customers use TAITherm for an array of applications including the latest advancements in automotive, electronics, wearables, military technology, architecture, and more. Our customers are pushing the boundaries of new technology by increasing usability, safety, and effectiveness in their industries through thermal simulations and thermal analysis.

For decades, SINDA/FLUINT has provided users with proven and powerful heat transfer and fluids analysis capabilities that continue to expand each year. SINDA/FLUINT is a comprehensive, generalized tool for simulating complex thermal/fluid systems such as those found in the electronics, automotive, petrochemical, power generation, medical, and aerospace industries. SINDA/FLUINT saves time and money by making the design process faster and easier, letting you gain a better understanding of your complex system. You control what is important and how to get the answer to your design performance questions using the most efficient approach. Furthermore, the application is completely extensible making it perhaps the most versatile thermal and fluids software product on the market. You choose the features you want, decide what levels of accuracy and approximation are appropriate, and what outputs are needed.

Simcenter Nastran is a premier finite element method (FEM) solver for computational performance, accuracy, reliability and scalability. Simcenter Nastran includes powerful solutions for linear and nonlinear structural analysis, structural dynamics, acoustics, rotor dynamics, aeroelasticity, thermal analysis, and optimization. The advantage to having all these solutions available in a single solver is that input/output file formats are the same for all solution types, which greatly simplifies modeling processes. Available as a standalone enterprise solver or as an integrated solver in Simcenter 3D, Simcenter Nastran helps manufacturers as well as engineering suppliers in aerospace, automotive, electronics, heavy machinery, medical device, and other industries for their critical engineering computing needs so they can produce safe, reliable and optimized designs within ever shorter design cycles.

The closest to reality results in all your casting processes such as sand casting, pressure die casting, investment casting, lost foam, and tilt casting is now in Turkey with JSCAST® casting simulation. With its proven results, JSCAST® guarantees your success in casting. In JSCAST®, you can use all processors in your computer (CPU) at no additional cost. With our tried-and-true approach to casting and process design, we offer brand-new techniques as well as known rules to support your competition in today's global market. In the designs you create with JSCAST® casting simulation; forming a casting with the correct geometry to adapt to the flow of the liquid metal; optimal runner, runner gates, overflows, cooling or thermal regulation line placements; if needed, use of squeeze pin, vacuum channels or placement of vent holes and chiller in iron casting; you will be profitable by deciding from the very beginning the improvements.

SOLIDCast Casting Simulation software is the world's most popular pc-based solidification modeling system and cast design software used in the casting industry. SOLIDCast is developed after analyzing and focusing on the real time issues & problems when designing and making solid casts. Unlike other software engineers who come from academic backgrounds, the software engineers who develop this Casting Simulation software have actual experience in foundries and casting industry. They have been applying their experience since 1985 to improve SOLIDCast Casting Simulation software and SOLIDCast family of products. Their combined experience in Software engineering and foundries has made SOLIDCast the most practical software for the casting industry. Thermal changes caused by heat transfer in the solidification process of casting can be modeled using SOLIDCast Casting Simulation software.

Metal casting is involved in many products that we use on a daily basis. This crucial manufacturing process has the potential to waste a lot of time and resources if not planned or optimized correctly. However, these issues can be solved by performing a casting simulation with Click2Cast. Click2Cast is the easy-to-use casting simulation software from SolidThinking. It helps designers and engineers understand how their products will be cast before spending a lot of time or money on the iteration process. Click2Cast even includes pre-determined 5-step casting templates. Simulation early in the design process helps organizations ensure that they are meeting all of their rigorous safety, quality, and performance standards. It also helps users understand how parts can be optimized for the most cost-effective operations.

Applied early in the product development lifecycle, Inspire accelerates the creation, optimization, and study of innovative, structurally efficient parts and assemblies through collaboration. Inspire's award winning user experience for geometry creation and modification can be learned in just a few hours, and delivers dependable Altair solver power. Structural analysis with the speed and accuracy of Altair® SimSolid®, as independently validated by NAFEMS, provides the ability to analyze large assemblies and complex parts. Dynamic motion simulation, including loads extraction, using the reliable multi-body systems analysis of Altair® MotionSolve®. The industry standard for structural efficiency, topology optimization by Altair® OptiStruct®, for the generative design of practical, viable, and manufacturable geometry. Inspire enables both simulation analysts and designers to perform what-if studies faster, easier, and above all earlier, encouraging collaboration.

With more than 34 years of development and user feedback, Simcenter Flotherm is the leading electronic cooling simulation software solution for electronic thermal analysis. It shortens development at IC package, PCB, and enclosure level through to large systems such as data centers. Improve electronics thermal management for reliability with fast, accurate electronics cooling CFD simulation from initial pre-CAD exploration to final verification. Simcenter Flotherm integrates with the electronics development workflow as a tool for thermal engineers to perform simulations and provide timely accurate results and feedback to other engineering functions. It supports thermal management, and simulation-based decision-making from early-stage architecture to final thermal design verification. This aids shortened development and also helps to eliminate risks of costly reliability-related warranty costs or any late-stage re-spins.

6SigmaET is an electronics thermal modeling tool that uses advanced computational fluid dynamics (CFD) to create accurate models of electronic equipment. Designed specifically for the electronics industry, our thermal simulation software ushers in unparalleled intelligence, automation and accuracy to help you meet your requirements and overcome thermal design challenges. Since its inception in 2009, 6SigmaET has become the fastest-growing thermal simulation software in the electronics cooling market. The versatility of 6SigmaET allows you to simulate the thermal performance of electronic components: ranging from the smallest ICs to the largest, most powerful servers. Learn more about 6SigmaET's value to your industry by watching one of our videos or exploring our case studies. The complete CAD geometry of a device and PCB design can be imported into 6SigmaET for thermal analysis, reducing model creation time.

Simcenter MAGNET is a powerful electromagnetic field simulation solution for performance prediction of motors, generators, sensors, transformers, actuators, solenoids, or any component with permanent magnets or coils. Simcenter MAGNET helps you predict the performance of any component with permanent magnets or coils. Perform low-frequency electromagnetic field simulations. Simcenter MAGNET includes capabilities to accurately model the physics of electromagnetic devices. This includes the ability to model manufacturing processes, temperature-dependent material properties, magnetization and de-magnetization modeling, and vector hysteresis models among others. Simcenter MAGNET also has a built-in motion solver with a six-degree-of-freedom capability. It allows for complex problems like magnetic levitation or complex motion to be accurately modeled and analyzed. This is made possible with a unique smart re-meshing technology.

FloCAD® is a fluid dynamics software add-on module for Thermal Desktop®, together they provide a complete thermohydraulic software tool for fully integrated fluid flow and heat transfer analysis. With FloCAD, the mechanics of building fluid flow models is very similar to that of building thermal models, with many of the commands applicable to both types of models. FloCAD models can be free-form (non-geometric), sketchpad style flow network modeling for abstraction and simplification, or they can be geometry-based by including objects such as pipe centerlines and cross-sections, complexly shaped vessels, or convection to finite difference of finite element representations of thermal structures. As a generalized pipe flow software tool, FloCAD captures the pressure drops in a piping network due to bends, valves, tees, changes in flow area, etc.

Enhance your product design with simulation and analysis to reduce costly physical prototyping while increasing your products' durability, reliability, and safety. Using digital prototypes to understand how your designs perform in real-world conditions is vital to your product development process. Creo Simulation is designed uniquely for the engineer. It comes complete with structural, thermal, and vibration analysis solutions and a comprehensive set of finite elements analysis (FEA) capabilities. With Creo Simulation, you can analyze and validate the performance of your 3D virtual prototypes before you make the first part. We offer flexible and unique simulation solutions for our customers. Utilize this section to gain insights into what we offer to fit your needs. If you have any questions about our tool stack, feel free to contact a Creo representative.

Optimize product designs and reduce time to market with FLOW-3D, a highly-accurate CFD software that specializes in solving transient, free-surface problems. FLOW-3D‘s complete multiphysics suite includes our state-of-the-art postprocessor, FlowSight. FLOW-3D provides a complete and versatile CFD simulation platform for engineers investigating the dynamic behavior of liquids and gas in a wide range of industrial applications and physical processes. FLOW-3D focuses on free surface and multi-phase applications, serving a broad range of industries including microfluidics, bio-medical devices, water civil infrastructure, aerospace, consumer products, additive manufacturing, inkjet printing, laser welding, automotive, offshore, energy and automotive. A uniquely powerful, multiphysics tool, FLOW-3D provides the functionality, ease-of-use and power that helps engineers advance their modeling objectives.

SimScale is a cloud-based web application that plays a key part in simulation software for many kinds of industries. The platform allows the use of Computational Fluid Dynamics (CFD), Finite Element Analysis (FEA), and Thermal Simulation. It also offers 3D simulation, continuous modeling, and motion & dynamic modeling.

Based on computational physics, Energy2D is an interactive multiphysics simulation program that models all three modes of heat transfer, conduction, convection, and radiation, and their coupling with particle dynamics. Energy2D runs quickly on most computers and eliminates the switches among preprocessors, solvers, and postprocessors typically needed to perform computational fluid dynamics simulations. It allows you to design "computational experiments" to test a scientific hypothesis or solve an engineering problem without resorting to complex mathematics. Work is also underway to incorporate other types of energy transformations and support multiple types of fluids. The conduction part of Energy2D is highly accurate, but the convection and radiation parts are not 100% accurate. Hence, in cases that involve convection and radiation, Energy2D results should be considered qualitative. More than 40 scientific papers have used Energy2D as a research tool.

Ansys Fluent is the industry-leading fluid simulation software known for its advanced physics modeling capabilities and industry leading accuracy. Ansys Fluent gives you more time to innovate and optimize product performance. Trust your simulation results with a software that has been extensively validated across a wide range of applications. With Ansys Fluent, you can create advanced physics models and analyze a variety of fluids phenomena—all in a customizable and intuitive space. Accelerate your design cycle with this powerful fluid simulation software. Ansys Fluent contains the best-in class physics models and can accurately and efficiently solve large , complex models. Ansys Fluent unlocks new potentials for CFD analysis. A fluid simulation software with fast pre-processing and faster solve times to help you be the fastest to break into the market. Fluent’s industry leading features enable limitless innovation, while never making a compromise on accuracy.

An ultra-fast, oct-tree accelerated Monte-Carlo ray tracing algorithm is used by RadCAD to compute radiation exchange factors and view factors. Innovations by C&R Technologies to the ray tracing process have resulted in an extremely efficient thermal radiation software tool. Using finite difference "conics" (simple geometric objects) or curved finite elements from TD Direct®, RadCAD can accurately model diffuse or specular reflections and transmissive surfaces regardless of node density. The needs of the thermal solution dictate the number of nodes, not the accuracy requirements of the radiation. RadCAD makes use of user-defined databases of optical properties. Each surface coating defines absorptivity, transmissivity, and reflectivity along with specularity in both the solar and infrared wavelength regimes. These properties can be defined versus incident angle or even with wavelength dependence.

Thermal Desktop includes all aspects of model creation. Built-in finite difference, finite element, and lumped capacitance objects can be combined in any configuration. Thermal-specific objects such as contact conductance, insulation, heat loads, and heaters can be added to model anything from automotive components to manned spacecraft. Thermal Desktop provides full parameterization using variables and arbitrarily complex expressions as input rather than hardwired numbers. These variables, called symbols, allow models to be rapidly manipulated with a few keystrokes, meaning updating or maintaining the model is easy, as is performing sensitivity studies and investigating what-if scenarios. This also provides access to SINDA/FLUINT’s optimization and reliability modules and automatic model correlation.

Our STARe software is the standard in thermal analysis, providing nearly limitless evaluation possibilities. Its unique features include modularity, flexibility, and automation. The software also helps you to remain compliant within a regulated industry. All of our thermal analysis systems are controlled from one powerful software platform. We offer a comprehensive line of thermal analysis systems with the best variety of instruments. Our thermal analysis software STARe is powerful and easy to use. Measurements and experiments are sent to the instruments, and the resulting curves can then be evaluated immediately based on the user’s wishes. STARe sets the standard for thermal analysis software. It is an extremely versatile software that offers extreme flexibility and almost limitless evaluation possibilities. STARe is a comprehensive software that powers all of METTLER TOLDEO’s thermal analysis systems, further simplifying workflows.

Your PerkinElmer thermal analysis instruments and data come to life on the Pyris™ software platform, the benchmark in high-sensitivity thermal analysis. Pyris is the preferred choice in thermal analysis because it is intuitive and user-friendly, and provides a wide range of standard features and capabilities for maximum flexibility. Whether in a totally automated research laboratory, an automated QA/QC lab, or a stand-alone instrument, you can be sure that the Pyris software meets your operating requirements. To ensure the highest user satisfaction, we designed and continuously enhanced Pyris software based on customer feedback. A common platform for all instruments makes it easy to use and quick to learn. Pyris software is easy to use without losing capabilities. The software has been designed to allow you to conduct data acquisition and analysis in one window, and run multiple analyzers simultaneously. A wide range of analysis options, and data import/export flexibility.

CoTherm is a coupling and process automation software that acts as an ambassador between CAE programs. CoTherm makes process automation simple. It is useful for running sensitivity studies, a design of experiments, or running multiple CAE models as part of a single process. This capability can streamline pre-processing, transient analysis thermal analysis, or post-processing. With a CoTherm software license, we provide templates for common coupling or automation tasks. CoTherm includes optimization capabilities that determine which inputs used in your design are the best choice. Any CAE analysis can be optimized using the general optimization sub-processes. CoTherm's mathematically rigorous solution (including multiple global and local methods) removes guesswork and complexity from your design process. CoTherm natively supports many popular thermal and CFD codes. CoTherm's powerful tools allow the coupling of any software that can run in the command line or with config files.

Vampire (Virtual Additive Manufacturing System) Additive manufacturing simulation (3D printing): is an engineering computing software that simulates the process of 3D printing to predict and analyze results and performs transient heat transfer analysis, deformation analysis by thermal expansion and prediction, and strength analysis of residual stress. Since 3D additive manufacturing technology often requires high cost and time for product manufacturing, it is essential to identify and respond to various problems in the manufacturing process in advance by applying analysis techniques suitable for the additive manufacturing process before manufacturing. Vampire provides key tools for building a smart preprocessing process for this mere purpose.

A common challenge faced by original equipment manufacturers around the globe is finding a way to manage their mold assets. OEMs invest many millions of dollars in the development of molds used to manufacture their products and packaging but often overlook asset and tool life management. It’s not unusual for large companies to own thousands of molds, which can be located in multiple locations in different countries. And if they’re outsourcing any part of their manufacturing to third-party resources, it can become even more difficult to maintain inventory and control over these fixed assets. At COAST, our single focus is to turn these mold management challenges into opportunities that reduce risk and strengthen core manufacturing operations. Our one-of-a-kind Global Mold Management program combines powerful cloud-based Asset Management Technology with expert support to help mold makers save time and money by not only tracking assets but maximizing their utilization.

With CONSELF you can exploit Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) to improve your products design: minimize drag and fluid dynamics losses, increase efficiency, maximize heat exchange performances, estimate pressure loads, verify material resistance, evaluate components shape deformation, calculate natural frequencies and modes, and much more. Static and dynamic simulations are available for Structural Mechanics, with both elastic and plastic materials behavior. Modal and frequency analyses can also be carried out starting from most common CAD neutral file formats.

INFOMAN eDMS is workflow-based application designed to automate key functional areas of an Automobile dealership like Vehicle Indenting & Purchase, Vehicle Stocking, Booking, Billing & Financial Accounting. INFOMAN – eDMS gives the Managers the option to approve transactions which otherwise is difficult on paper and can be tampered with. Our application has been implemented successfully at more than 800+ dealership including brands of Maruti Suzuki, Audi, Renault, Jaguar, MG Motors, Volkswagen, Nissan, Kia, Mahindra, Hyundai, TATA, Honda, BMW, Mercedes, Jeep, Skoda, Toyota, Bajaj, Hero and Ather.

Fusion 360 with PowerMill® CAM software provides expert CNC programming strategies for complex 3- and 5-axis manufacturing. Now includes access to Fusion 360, Fusion 360 Team, and advanced manufacturing capabilities through Fusion 360 extensions. Access a vast library of strategies in PowerMill. Reduce programming times with rapid toolpath calculation. Simulate, verify, and optimize motion of CNC machines and industrial robots. Fusion 360 offers 3D modeling, generative design, simulation, electronics, collaboration, and more. Get modeling for manufacture tools to help prepare complex geometry for better CAM programming. Use simulation tools to improve plastic part designs and optimize the mold tools used to make them. This US manufacturer uses a combination of Autodesk Moldflow, PowerMill, and PowerShape in the design and manufacture of high-quality injection molds.

Based on a local density map, REM3D® provides reliable answers for the prediction of parts resistance as well as insulating, noise and/or comfort properties. Simulate a ‘dual foam’ pouring and observe the transition zones between foams of different rigidities. Taking into account "mold tilting" translates realistic process conditions to be as close as possible to reality. The integration of functionalities such as automatic mold tilting or the impact of gravity on the melt flow allows to analyze the real conditions of your processes to guarantee the homogeneity of your parts. The study of the positioning of the injectors limits the presence of defaults. Thus, you get reliable predictions concerning the resistance of your parts but also the insulating and comfort properties of the foams. For plastics with fibers, REM3D® determines the fiber's orientation during the filling stage and after cooling.

PSIM has been a leading power electronics and motor drive simulation and design software for over 25 years. With an intuitive, user-friendly interface and a robust simulation engine, PSIM is the all-in-one solution that meets users’ simulation and design needs. PSIM can handle quick power converter loss calculations, motor drive efficiency calculations, conducted EMI analysis, and analog/digital control. PSIM also offers automatic embedded code generation for rapid control prototyping. Additionally, with PSIM’s various Design Suites, users can design power supplies, electromagnetic interference (EMI) filters, and motor drive systems quickly and conveniently.

Additive Works provides software solutions aiming at a "first-time-right" additive manufacturing process by integrating new analysis and simulation tools into the process chain of Laser Beam Melting processes (LBM, SLM, DMLS, Metal 3D Printing). Driven by current requirements and challenges of industrial additive manufacturing, the software suite Amphyon aims to significantly reduce pre-processing costs and take metal AM to the next level of automation. The ASAP-Principle describes four ideal steps on the way to a stable, efficient and reliable process chain: Assessment, Simulation, Adaption and the Process itself. By examining all possible build-up orientations with respect to economical and physical aspects of the process on the Assessment stage, both, limitations of the design and optimal orientations can be calculated.

Moldex3D is the world leading CAE product for the plastic injection molding industry. With the best-in-class analysis technology, Moldex3D can help you carry out in-depth simulations of the widest range of injection molding processes and to optimize product designs and manufacturability. In addition, its high compatibility and adaptability have provided users with an instant connection to mainstream CAD systems, generating a flexible simulation-driven design platform. Moldex3D is designed for auto manufacturers and design engineers to simulate and verify complex auto parts/molds based on true 3D technology. With Moldex3D, auto designers or makers are able to manage the life cycle of a product from its conception, through design and manufacturing. This also helps component designers or suppliers to get rid of most potential problems in the early stage. Also, visualization of the entire injection molding processes of auto parts allows users to obtain solutions more efficiently.

CAD-embedded finite element analysis software. Use a wider variety of study types and materials in your analysis. Inventor® Nastran® delivers finite element analysis (FEA) tools for engineers and analysts. Simulation covers multiple analysis types, such as linear and nonlinear stress, dynamics, and heat transfer. Inventor Nastran is available only in the Product Design & Manufacturing Collection. The Product Design & Manufacturing Collection delivers tools that work right inside Inventor—including advanced simulation, 5-axis CAM, and nesting, plus AutoCAD and Fusion 360.

Software To Calculate Least Cost Charge Mix. OPTIMIX is an ingenious software developed exclusively for melt shops which allow our customers to save money literally going into smoke. The software is developed based on Mathematical Programming that uses an algorithm to calculate Least Cost Charge. Recipe possible with raw materials available in your foundry, for the given target chemistry for desired metal grade. Charge Mix Simulator. Multiple Furnaces configuration. Constraints Configuration Module. Consideration of Heel (Metal Back to Furnace) in Charge Mix Calculation. Inventory Integration (Batch-wise Option Available). Integration with other ERP/Softwares (Excel/API)What-If Analysis Reports. OPTIMIX is the must have product for any foundry. Here is why. Cost Savings. Lowest Cost Charge Mix Recipe Mathematically Possible. Control. Complete Control over your final product. ROI. Product that gives ROI within Months! Feel Confident.

Metariver Technology Co., Ltd. is developing innovative and creative computer-aided engineering (CAE) analysis S/W based on the latest HPC technology and S/W technology including CUDA technology. We will change the paradigm of CAE technology by applying particle-based CAE technology and high-speed computation technology using GPUs to CAE analysis software. Here is an introduction to our products. 1. Samadii-DEM (the discrete element method): works with the discrete element method and solid particles. 2. Samadii-SCIV (Statistical Contact In Vacuum): working with high vacuum system gas-flow simulation. Using Monte Carlo simulation. 3. Samadii-EM (Electromagnetics): For full-field interpretation 4. Samadii-Plasma: Plasma simulation for Analysis of ion and electron behavior in an electromagnetic field. 5. Vampire (Virtual Additive Manufacturing System): Specializes in transient heat transfer analysis. additive manufacturing and 3D printing simulation software

The SIGMASOFT ® VIRTUAL MOLDING simulation software gives you a significant advantage in the injection and compression molding industry: - evaluate and optimize processes & complete molds - increase efficiency, productivity & part quality - reduce waste associated with trial & error

Every major film and television studio uses Cast It to make its casting decisions. Every day a community of more than 10,000 studio executives, producers, directors, and casting professionals log in to Cast It. We provide our audience of over 250,000 actors and talent representatives with the information and tools you need to succeed. Cast It Talent is open to both union and non-union actors, as well as represented and unrepresented talent. We welcome talent from any geographical location in the world, not just Los Angeles and New York. Agents and managers can also join Cast It Talent, for free! And set up accounts for their clients. You can add your talent representative to your account by logging in and going to the 'Talent Rep' tab. Enter your representative's email address and the rest of the fields (first and last name, agency or management company, etc) will auto-populate. Then click the 'send' button at the bottom of the page.

Screen mirroring for Samsung, LG & Roku is a reliable and very easy-to-use screen casting or streaming tool to help mirror iPhone or iPad screens to Samsung, LG & Roku TVs in high quality. Please notice that our screen mirroring app is not suitable for playing games on TV, because the normal delay time is from 5s to 6s. We are working hard to make it come true for gamers. Mirror any application or games (for watching) wirelessly on your iPhone/iPad screen to your Samsung (without audio), LG & Roku TVs over your wifi network. Open the app and click on Start Mirroring to start mirroring on Samsung, LG & Roku TVs. To stop mirroring click on the top red bar of your iPhone. The app works best for iPhone 7 & above, iPad 3 & above, iOS 12 +. Cast youtube videos to TVs. No cables, no additional hardware, and nothing else needed. Stream your favorite movies and apps on big Samsung, LG & Roku TVs. Cast youtube videos to Samsung, LG & Roku TVs.

In markets where the safety of welded assemblies is essential, analysis with TRANSWELD® offers a global and innovative solution to anticipate welding defects. Our simulation software integrates multi-physical models to simulate the real behavior of the metal in the liquid/mushy state to perform a complete analysis of the material evolution. TRANSWELD® also makes it possible to study the microstructure of the solid-state assembly. Then, you ensure the conformity of your welded part without going through the prototyping stage. Our software is 100% predictive. It allows you to observe your welding processes numerically by applying real conditions. For example, you can visualize the heat source movement during the simulation of laser welding or arc welding.

INFOMAN eCRM is a web-based CRM solution that helps auto dealers to higher conversion through strong follow-up against existing customer data supported by a proved process. The application has been successfully implemented at more than 800 dealers including brands of Maruti Suzuki, Renault, Audi, Toyota, Jaguar, MG Motors, Fiat, Volkswagen, Nissan, Kia, Mahindra, Hyundai, TATA, Honda, Chevrolet, BMW, Mercedes and more.

U& Terminal Container is a Terminal Operating System developed by combining the terminal operations know-how of the global maritime shipping company Hyundai Merchant Marine with the state of the art IT technology of HYUNDAI MOVEX, and as such, it is the solution with the largest market share among terminal operating systems in the domestic market. U& Terminal Container is an operating system optimized for both manual and automated terminal environments, and also supports specialized automation modules for manual terminals looking to switch to automation. The current 3rd generation of the U& Terminal is characterized by its outstanding operating efficiency founded upon an elegant operation planning algorithm; optimized resource utilization occurs through an automated planning system and yard management functions.

PV Elite® is a complete solution for vessel and heat exchanger design, analysis and evaluation. The program is easy to learn and use so it is perfect for users requiring fast start-up and confidence in their safety code calculations. PV Elite considers the whole vessel, addressing all of the wall thickness rules and stress analysis requirements for vertical towers, horizontal vessels and heat exchangers. It also evaluates and re-rates existing vessels, including Fitness for Service analysis. PV Elite® is your complete solution for vessel and heat exchanger design, analysis and evaluation. Users of PV Elite users have confidently designed equipment for the most extreme uses and have done so quickly, accurately and profitably. Data Collection PV Elite makes defining pressure boundary conditions for vessels and exchangers easy, even for load sets that require significant data input. PV Elite streamlines data entry by breaking the input down into sensible subsets.