DownloadThis reflow oven controller was built to control a modified toaster oven for the purpose of doing reflow soldering of printed circuit boards. The controller was designed and built around an ESP32-DevKitC development board with ancillary electronics added to complete the controller. The schematic can be found in <files/hardware>.
The code for the controller was modified extensively from existing Arduino sketches for reflow oven controllers and is PID-algorithm based. The firmware ("sketch") can be found in <Files/firmware>.
The Serial Profile Plotter For Reflow Ovens utility was written to operate in conjunction with this controller. You can download it here:
https://sourceforge.net/projects/serial-profile-plotter-reflow/
Features
- ESP32-DevKit-C Arduino based reflow oven controller
- I2C LCD display with support code for 4 line x 20 characters display
- USB-Serial board interface to PC using serial Rx/Tx data from/to ESP32
- MAX6675 thermocouple interface board with SPI connection to ESP32
- Single Start / Stop button for initializing / halting reflow process
- Button to select between lead-free and leaded solder profiles
- EN and BOOT buttons brought out from ESP32 for programming the device
- Output for driving Solid State Relay (SSR)
- Output for driving a small 8 ohm speaker which is used for audible warnings
- Startup sounds and alarm sounds for start of different phases of reflow process
- SPDT switch to select between stand-alone (oven) mode and ESP32 programming mode
Follow ESP32 Arduino Reflow Oven Controller
You Might Also Like
HubSpot is an AI-powered customer platform with all the software, integrations, and resources you need to connect your marketing, sales, and customer service. HubSpot's connected platform enables you to grow your business faster by focusing on what matters most: your customers.
Rate This Project
Login To Rate This Project
User Reviews
Be the first to post a review of ESP32 Arduino Reflow Oven Controller!