I have tried to connect to APRS-IS without any success. I hava all the settings as in Xastir and other programs, but the IP symbol is black and there is no packets in raw packet window.
I have tried most servers, but there is no data traveling, but in other programs, like pinpoint it works well
This is from the log:
Tue Jul 09 12:14:09 GMT 2019: attempt#2 opening socket to APRS-IS server euro.aprs2.net/89.185.8.55:14580
old socket rcvBuf=43690
updated socket rcvBuf=49152
Tue Jul 09 12:14:09 GMT 2019: opening euro.aprs2.net:14580 with filter " filter m/500"
aprsc 2.1.4-g408ed49
logresp TF1MT-0 verified, server T2UKRAINE
I'm connected to microsat WX3in1 mini with KISS over TCP one way, and it is working. But not APRS-IS
I have version build 140 Beta.
Best Regards
Magnus
73 de TF1MT
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Do you have your position beacon configured in YAAC?
Is your APRS-IS port configured with your passcode and set up for transmitting to the APRS-IS backbone?
If you don't meet both of these requirements, the filter expression you specified will mean nothing. The "m/500" filter you specified means to send traffic from stations and objects within 500 kilometers of your station's reported position. If you are not sending position beacons to the APRS-IS server, then it will have no position to calculate a 500-km circle around.
You might want to switch to a "r/lat/lon/500" filter expression instead; then you don't need to send data to the APRS-IS to receive something back.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
Anonymous
-
2019-07-10
Thanks. This was just that I had not sent beacon :/
Now it is working.
Sometimes things are to simple, to see the obvius.
Thanks a lot for the help
Magnus
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi
I have tried to connect to APRS-IS without any success. I hava all the settings as in Xastir and other programs, but the IP symbol is black and there is no packets in raw packet window.
I have tried most servers, but there is no data traveling, but in other programs, like pinpoint it works well
This is from the log:
Tue Jul 09 12:14:09 GMT 2019: attempt#2 opening socket to APRS-IS server euro.aprs2.net/89.185.8.55:14580
old socket rcvBuf=43690
updated socket rcvBuf=49152
Tue Jul 09 12:14:09 GMT 2019: opening euro.aprs2.net:14580 with filter " filter m/500"
aprsc 2.1.4-g408ed49
logresp TF1MT-0 verified, server T2UKRAINE
I'm connected to microsat WX3in1 mini with KISS over TCP one way, and it is working. But not APRS-IS
I have version build 140 Beta.
Best Regards
Magnus
73 de TF1MT
OK, a couple of possibilities here.
If you don't meet both of these requirements, the filter expression you specified will mean nothing. The "m/500" filter you specified means to send traffic from stations and objects within 500 kilometers of your station's reported position. If you are not sending position beacons to the APRS-IS server, then it will have no position to calculate a 500-km circle around.
You might want to switch to a "r/lat/lon/500" filter expression instead; then you don't need to send data to the APRS-IS to receive something back.
Thanks. This was just that I had not sent beacon :/
Now it is working.
Sometimes things are to simple, to see the obvius.
Thanks a lot for the help
Magnus