Re: FreeBSD 5.0 Webmin Slow after IP Address Change

[Jamie C. <jca...@we...>]

This could be related to DNS lookups - try running the command
nslookup xx.xx.xx.xx  at the shell prompt, where xx.xx.xx.xx is the IP
of the system on which your browser is running. If the configured DNS
servers cannot be contacted, this will be very slow, and so will webmin.

 - Jamie

On Sat, 2003-03-15 at 06:51, Nicholaus C. Luer wrote:
> My first post to the list - let me thank everyone in advance for any
> assistance, and all the help that you have already provided in the archives.
> 
> I have searched, but haven't been able to find anything relevant to my
> issue.
> 
> FreeBSD 5.0
> Webmin 1.070
> 
> When I configured the machine it was on my local LAN with a 192.168.x.x IP.
> Everything ran just fine, webmin, apache, sendmail, etc. After moving the
> machine to a public IP webmin is very, very slow (3-4 minutes for a page to
> load). I have tried accessing it from many machines, same results
> everywhere.
> 
> If I put it back on my LAN webmin is back up to normal speed.
> 
> Every once in a while (twice since the IP move) webmin will jump to life for
> 10-15 seconds, then back to being slow. I have several other machines on the
> same network and IP block running webmin without an issue (Debian on those
> machines).
> 
> Any ideas?
> 
> Thanks!
> Nicholaus
> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by:Crypto Challenge is now open! 
> Get cracking and register here for some mind boggling fun and 
> the chance of winning an Apple iPod:
> http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en
> -
> Forwarded by the Webmin mailing list at web...@li...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-list
>