vim-latex-devel — Mailing list for developers/maintainers of the vim-latex project

Re: [Vim-latex-devel] possible bug in block expansion?

[Mike R. <ri...@um...>]

Hi Walter,

I'd say this is a feature, not a bug.  The idea is that you use <C-j>
(control-J) to cycle through <++> markers.  You write in the equation, press
<C-j> and fill in the label, and press <C-j> again to get outside the
equation environment where you can then press <enter> and continue writing
the prose of the document.

You can change this behavior by inserting the following into
~/.vim/ftplugin/tex.vim:

    call IMAP ('EEQ',
               \ . "\\begin{equation}\<cr><++>\<cr>"
               \ . "\\label{<++>}\<cr>"
               \ . "\\end{equation}", 'tex')

Hope this helps.

Cheers,
Mike


On Mon, May 26, 2014 at 9:03 PM, Walter Rabus <wal...@we...> wrote:
> Hi,
>
> I noticed a weird behavior when expanding a line with the vim-latexsuite
> and F5. Take the following code-snipped, pressing F5 in the line with
> the upper "equation" the line gets expanded to the lower construct:
>
> \documentclass[12pt,a4paper,oneside]{article}
> \usepackage{amssymb,amsmath}
> \begin{document}
>
> equation
>
> \begin{equation}
>         foo
>         \label{<++>}
> \end{equation}<++>
>
> \end{document}
>
> The problem I see with this is the <++> after "end{equation}" leads to
> "¡++¿" in the final document when compiled. As I think this is not
> intended to be there, I'd like to ask whether this is a bug or intended
> behavior for some reason and whether someone can reproduce it.
>
> I tested it with the git-version of vim-latexsuite as well.
>
> If it can be confirmed to be a reproducable bug, I would like to propose
> to remove the trailing "<++>" as I see no purpose it serves.
>
>
> Walter
>
> ------------------------------------------------------------------------------
> The best possible search technologies are now affordable for all companies.
> Download your FREE open source Enterprise Search Engine today!
> Our experts will assist you in its installation for $59/mo, no commitment.
> Test it for FREE on our Cloud platform anytime!
> http://pubads.g.doubleclick.net/gampad/clk?id=145328191&iu=/4140/ostg.clktrk
> _______________________________________________
> Vim-latex-devel mailing list
> Vim...@li...
> https://lists.sourceforge.net/lists/listinfo/vim-latex-devel

[Vim-latex-devel] possible bug in block expansion?

[Walter R. <wal...@we...>]

Hi,

I noticed a weird behavior when expanding a line with the vim-latexsuite
and F5. Take the following code-snipped, pressing F5 in the line with
the upper "equation" the line gets expanded to the lower construct:

\documentclass[12pt,a4paper,oneside]{article}
\usepackage{amssymb,amsmath}
\begin{document}

equation

\begin{equation}
	foo
	\label{<++>}
\end{equation}<++>

\end{document}

The problem I see with this is the <++> after "end{equation}" leads to
"¡++¿" in the final document when compiled. As I think this is not
intended to be there, I'd like to ask whether this is a bug or intended
behavior for some reason and whether someone can reproduce it.

I tested it with the git-version of vim-latexsuite as well.

If it can be confirmed to be a reproducable bug, I would like to propose
to remove the trailing "<++>" as I see no purpose it serves.


Walter

[Vim-latex-devel] Can't find file

[Mark M. <mar...@gm...>]

I am a new latex user so forgive the newbie nature of this but after a couple days searching Google and the list here I am still at a loss. 

I have a clean install of vim 7.4. It is installed locally at ~/local/linux

(We work with multiple unix architectures hence the linux directory in my own local). My path will search the bin in this area before system paths. 

 I installed the last vim-latex from January 2013 in my local .vim directory. I also have about 10 additional plugins however I have also tried this with a clean .vim. 

I have a presentation tex file. I open in vim and compile with \ll. I get the error. 

I can't find file 'presentation.tex'. presentation.tex
Emergency stop.

If I place this file in my home directory it compiles fine. And of course I can compile fine from the command line regardless of where the file is. 

Any guidance how to track this down?

Mark

[Vim-latex-devel] feature request: a$, i$ word objects

[Dan S. <da...@st...>]

It would be nice to allow selection of the text within dollar signs by 
typing vi$ (similarly, replacing this text with ci$, etc.).  This is the 
only feature I miss from LatexBox.

To see how LatexBox does it, search their code for "SelectInlineMath".  
I was able to steal this functionality by copying this and a few support 
functions into my after/ftplugin/tex.vim.

A less sophisticated way is explained in 
http://vim.wikia.com/wiki/Text_object_for_formulas_in_Latex

And thanks to all of the developers who make vim-latex a success!

- Dan

Re: [Vim-latex-devel] Help - compiling with spaces in filename

[Ruthard B. <rut...@we...>]

>== Auszüge aus der Nachricht von  Xavier Fontaine vom 2014-03-05 18:16:
> Dear all,
> 
> I experience a problem when compiling a .tex file whenever there is a white
> space in the filename.

Using the vim-latex compile shortcut?

It might be not very helpful, but:
1) Whitespace in file names is MS Evil!
2) I'm using pdflatex or xetex directly from vim:
      :!pdflatex % && pdf-viewer %<.pdf

   Where "pdf-viewer" is your pdf viewer of choice.

If there is MS Evil (whitespace) in the file name, you have to put the % in '"':
      :!pdflatex "%" && pdf-viewer "%<.pdf", and it should work.

I suspect to get the vim-latex native compile function to work, you have
to add some '"' in the source

No real answer to your question, hope it helps as a work-around at
least.

Greetings, Ruthard

[Vim-latex-devel] Help - compiling with spaces in filename

[Xavier F. <xav...@gm...>]

Dear all,

I experience a problem when compiling a .tex file whenever there is a white
space in the filename.
I am trying to compile a minimal tex file using vim-latex. Everything works
fine, except when there is a white space in the filename. For instance, I
have created two tex files : "test.tex", and "test 2.tex". Compiling runs
smoothly in the first case. In the second, I get the following :



*! I can't find file `test'.<*> test          2.tex(Press Enter to retry,
or Control-D to exit)*


This happens both when I try to compile in dvi and in pdf. I should mention
that compiling outside vim (so in bash) by typing either "latex test\
2.tex" or "latex 'test 2.tex'" works very well.
I would like to know whether you have any idea about what is happening here?


A few details that could be useful:
Version of Vim : 7.4, run in terminal mode
Version of Vim-Latex : latest one (downloaded from Sourceforge and
installed today)
OS : Xubuntu
Tex distribution : texlive (package texlive-full)


I would greatly appreciate any help you could give me!

Best,

Xavier

Re: [Vim-latex-devel] function to switch settings

[Andreas G. <and...@tu...>]

Hi everybody,

Thanks to the comment from another user I have complemented my functions 
by the following function calls:

call Tex_SetTeXCompilerTarget('Compile',g:Tex_DefaultTargetFormat)
call Tex_SetTeXCompilerTarget('View',g:Tex_DefaultTargetFormat)

Now everything works as expected.

Thanks and best regards.

Andreas


Am 02/26/2014 11:09 AM, schrieb Andreas Groh:
> Hi @ all,
>
> I am using vim latex suite for a while an I am quite happy with how it
> is working. I often have to switch between tex-projects in German (using
> pdflatex with biber) and project in English (using latex with bibtex).
> Hence, up to now I have to change the settings in my .vimrc before I
> start working on another project. These are my settings:
>
> "vim-latex plugin settings
> set grepprg=grep\ -nH\ $*
> let g:tex_flavor = 'latex'
> let g:Tex_BibtexFlavor = 'biber' " use biber instead of bibtex
> "let g:Tex_BibtexFlavor = 'bibtex' " using bibtex
> let g:Tex_UseMakefile = 0
> let g:Tex_ShowErrorContext = 0
> let g:Tex_AutoFolding = 0
>
> let g:Tex_CompileRule_dvi = 'latex --interaction=nonstopmode $*'
> let g:Tex_CompileRule_ps  = 'dvips -o $*.ps $*.dvi'
> let g:Tex_CompileRule_pdf = 'pdflatex --interaction=nonstopmode $*'
>
> let g:Tex_FormatDependency_ps  = 'dvi,ps'
> let g:Tex_FormatDependency_pdf = 'pdf'
>
> let g:Tex_MultipleCompileFormats = 'dvi,ps,pdf'
>
> let g:Tex_DefaultTargetFormat = 'pdf'
> "let g:Tex_DefaultTargetFormat = 'ps'
>
> So before switching from a German to an English project a toggle the
> comments for the Tex_DefaultTargetFormat and the Tex_BibtexFlavor (and
> the spell checking options). Since this is quite inconvenient I thought
> about defining two function which do the job. I added
>
> :function German()
> :       :set spell spelllang=de_20
> :       :let g:Tex_DefaultTargetFormat = 'pdf'
> :       :let g:Tex_BibtexFlavor = 'biber'
> :endfunction
> autocmd FileType tex :command! German :cal German()
>
> :function English()
> :       :set spell spelllang=en_gb
> :       :let g:Tex_DefaultTargetFormat = 'ps'
> :       :let g:Tex_BibtexFlavor = 'bibtex'
> :endfunction
> autocmd FileType tex :command! English :cal English()
>
> to my .vimrc. When I am calling the function English the spell checking
> and the bibliography settings are changed correctly. Even the default
> format is changed (checked by calling :TTarget) but it is not working as
> expected. After calling \ll a pdf file is still build, instead of a ps
> file. Sometimes (until now I could find out under which circumstance) a
> dvi is build, but not a ps like it should.
>
> Any ideas what is wrong with my function definition? What do I have to
> do in order to correctly change the default target from a function. Any
> hint is appreciated.
>
> Thanks and best regards.
>
> Andreas
>
>
>

-- 
------------------------------------------------------------------------
Andreas Groh                       phone : +49-351-463.34974
Institut fuer Planetare Geodaesie  fax   : +49-351-463.37063
Technische Universitaet Dresden    email : and...@tu...
D-01062 Dresden, Germany           web   : tpg.geo.tu-dresden.de
------------------------------------------------------------------------

Re: [Vim-latex-devel] function to switch settings

[Andreas G. <and...@tu...>]

Dear Francesco,

Thanks for the hint. Following your instructions I set the pdf/biber 
options in my .vimrc and placed the alternative options in the 
corresponding *.latexmain file. I first run for the ps/bibtex project 
ended up with a dvi only. After deleting all latex-related files another 
run correctly produced the ps. So your solutions seems to work. Thanks a 
lot.
Nevertheless, if somebody has an idea why the call of the appropriate 
function is not working as expected please let me know.

Best regards.

Andreas

Am 02/26/2014 11:24 AM, schrieb Francesco Montesano:
> Hi Andreas,
>
> This might work:
>
> Put your default settings (e.g. English) in your .vimrc (or
> ftplugin/tex) file.
> In the directory where you want you use the other language (e.g. German)
> create a
> main.tex.latexmain file [1] (I'm assuming that the main latex file is
> main.tex).
> Then put in main.tex.latexmain:
> set spell spelllang=de_20
> let g:Tex_DefaultTargetFormat = 'pdf'
> let g:Tex_BibtexFlavor = 'biber'
>
> This file is loaded after all the .vimrc and .vim/* files.
>
> I've used successfully this trick to compile with pdflatex specific
> projects, while keeping standard latex as default.
>
> Cheers,
>
> Fra
>
> ref:
> [1]
> http://vim-latex.sourceforge.net/documentation/latex-suite/latex-project.html
>
> ps: you might think about changing the spelllang only in the current
> buffer, in particular if you open different filetypes in the same session
>
>
>
> 2014-02-26 11:09 GMT+01:00 Andreas Groh <and...@tu...
> <mailto:and...@tu...>>:
>
>     Hi @ all,
>
>     I am using vim latex suite for a while an I am quite happy with how it
>     is working. I often have to switch between tex-projects in German (using
>     pdflatex with biber) and project in English (using latex with bibtex).
>     Hence, up to now I have to change the settings in my .vimrc before I
>     start working on another project. These are my settings:
>
>     "vim-latex plugin settings
>     set grepprg=grep\ -nH\ $*
>     let g:tex_flavor = 'latex'
>     let g:Tex_BibtexFlavor = 'biber' " use biber instead of bibtex
>     "let g:Tex_BibtexFlavor = 'bibtex' " using bibtex
>     let g:Tex_UseMakefile = 0
>     let g:Tex_ShowErrorContext = 0
>     let g:Tex_AutoFolding = 0
>
>     let g:Tex_CompileRule_dvi = 'latex --interaction=nonstopmode $*'
>     let g:Tex_CompileRule_ps  = 'dvips -o $*.ps $*.dvi'
>     let g:Tex_CompileRule_pdf = 'pdflatex --interaction=nonstopmode $*'
>
>     let g:Tex_FormatDependency_ps  = 'dvi,ps'
>     let g:Tex_FormatDependency_pdf = 'pdf'
>
>     let g:Tex_MultipleCompileFormats = 'dvi,ps,pdf'
>
>     let g:Tex_DefaultTargetFormat = 'pdf'
>     "let g:Tex_DefaultTargetFormat = 'ps'
>
>     So before switching from a German to an English project a toggle the
>     comments for the Tex_DefaultTargetFormat and the Tex_BibtexFlavor (and
>     the spell checking options). Since this is quite inconvenient I thought
>     about defining two function which do the job. I added
>
>     :function German()
>     :       :set spell spelllang=de_20
>     :       :let g:Tex_DefaultTargetFormat = 'pdf'
>     :       :let g:Tex_BibtexFlavor = 'biber'
>     :endfunction
>     autocmd FileType tex :command! German :cal German()
>
>     :function English()
>     :       :set spell spelllang=en_gb
>     :       :let g:Tex_DefaultTargetFormat = 'ps'
>     :       :let g:Tex_BibtexFlavor = 'bibtex'
>     :endfunction
>     autocmd FileType tex :command! English :cal English()
>
>     to my .vimrc. When I am calling the function English the spell checking
>     and the bibliography settings are changed correctly. Even the default
>     format is changed (checked by calling :TTarget) but it is not working as
>     expected. After calling \ll a pdf file is still build, instead of a ps
>     file. Sometimes (until now I could find out under which circumstance) a
>     dvi is build, but not a ps like it should.
>
>     Any ideas what is wrong with my function definition? What do I have to
>     do in order to correctly change the default target from a function. Any
>     hint is appreciated.
>
>     Thanks and best regards.
>
>     Andreas
>
>
>
>     --
>
>     ------------------------------------------------------------------------------
>     Flow-based real-time traffic analytics software. Cisco certified tool.
>     Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer
>     Customize your own dashboards, set traffic alerts and generate reports.
>     Network behavioral analysis & security monitoring. All-in-one tool.
>     http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk
>     _______________________________________________
>     Vim-latex-devel mailing list
>     Vim...@li...
>     <mailto:Vim...@li...>
>     https://lists.sourceforge.net/lists/listinfo/vim-latex-devel
>
>

-- 
------------------------------------------------------------------------
Andreas Groh                       phone : +49-351-463.34974
Institut fuer Planetare Geodaesie  fax   : +49-351-463.37063
Technische Universitaet Dresden    email : and...@tu...
D-01062 Dresden, Germany           web   : tpg.geo.tu-dresden.de
------------------------------------------------------------------------

Re: [Vim-latex-devel] function to switch settings

[Francesco M. <fra...@gm...>]

Hi Andreas,

This might work:

Put your default settings (e.g. English) in your .vimrc (or ftplugin/tex)
file.
In the directory where you want you use the other language (e.g. German)
create a
main.tex.latexmain file [1] (I'm assuming that the main latex file is
main.tex).
Then put in main.tex.latexmain:
set spell spelllang=de_20
let g:Tex_DefaultTargetFormat = 'pdf'
let g:Tex_BibtexFlavor = 'biber'

This file is loaded after all the .vimrc and .vim/* files.

I've used successfully this trick to compile with pdflatex specific
projects, while keeping standard latex as default.

Cheers,

Fra

ref:
[1]
http://vim-latex.sourceforge.net/documentation/latex-suite/latex-project.html

ps: you might think about changing the spelllang only in the current
buffer, in particular if you open different filetypes in the same session



2014-02-26 11:09 GMT+01:00 Andreas Groh <and...@tu...>:

> Hi @ all,
>
> I am using vim latex suite for a while an I am quite happy with how it
> is working. I often have to switch between tex-projects in German (using
> pdflatex with biber) and project in English (using latex with bibtex).
> Hence, up to now I have to change the settings in my .vimrc before I
> start working on another project. These are my settings:
>
> "vim-latex plugin settings
> set grepprg=grep\ -nH\ $*
> let g:tex_flavor = 'latex'
> let g:Tex_BibtexFlavor = 'biber' " use biber instead of bibtex
> "let g:Tex_BibtexFlavor = 'bibtex' " using bibtex
> let g:Tex_UseMakefile = 0
> let g:Tex_ShowErrorContext = 0
> let g:Tex_AutoFolding = 0
>
> let g:Tex_CompileRule_dvi = 'latex --interaction=nonstopmode $*'
> let g:Tex_CompileRule_ps  = 'dvips -o $*.ps $*.dvi'
> let g:Tex_CompileRule_pdf = 'pdflatex --interaction=nonstopmode $*'
>
> let g:Tex_FormatDependency_ps  = 'dvi,ps'
> let g:Tex_FormatDependency_pdf = 'pdf'
>
> let g:Tex_MultipleCompileFormats = 'dvi,ps,pdf'
>
> let g:Tex_DefaultTargetFormat = 'pdf'
> "let g:Tex_DefaultTargetFormat = 'ps'
>
> So before switching from a German to an English project a toggle the
> comments for the Tex_DefaultTargetFormat and the Tex_BibtexFlavor (and
> the spell checking options). Since this is quite inconvenient I thought
> about defining two function which do the job. I added
>
> :function German()
> :       :set spell spelllang=de_20
> :       :let g:Tex_DefaultTargetFormat = 'pdf'
> :       :let g:Tex_BibtexFlavor = 'biber'
> :endfunction
> autocmd FileType tex :command! German :cal German()
>
> :function English()
> :       :set spell spelllang=en_gb
> :       :let g:Tex_DefaultTargetFormat = 'ps'
> :       :let g:Tex_BibtexFlavor = 'bibtex'
> :endfunction
> autocmd FileType tex :command! English :cal English()
>
> to my .vimrc. When I am calling the function English the spell checking
> and the bibliography settings are changed correctly. Even the default
> format is changed (checked by calling :TTarget) but it is not working as
> expected. After calling \ll a pdf file is still build, instead of a ps
> file. Sometimes (until now I could find out under which circumstance) a
> dvi is build, but not a ps like it should.
>
> Any ideas what is wrong with my function definition? What do I have to
> do in order to correctly change the default target from a function. Any
> hint is appreciated.
>
> Thanks and best regards.
>
> Andreas
>
>
>
> --
>
>
> ------------------------------------------------------------------------------
> Flow-based real-time traffic analytics software. Cisco certified tool.
> Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer
> Customize your own dashboards, set traffic alerts and generate reports.
> Network behavioral analysis & security monitoring. All-in-one tool.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk
> _______________________________________________
> Vim-latex-devel mailing list
> Vim...@li...
> https://lists.sourceforge.net/lists/listinfo/vim-latex-devel
>

[Vim-latex-devel] function to switch settings

[Andreas G. <and...@tu...>]

Hi @ all,

I am using vim latex suite for a while an I am quite happy with how it 
is working. I often have to switch between tex-projects in German (using 
pdflatex with biber) and project in English (using latex with bibtex). 
Hence, up to now I have to change the settings in my .vimrc before I 
start working on another project. These are my settings:

"vim-latex plugin settings
set grepprg=grep\ -nH\ $*
let g:tex_flavor = 'latex'
let g:Tex_BibtexFlavor = 'biber' " use biber instead of bibtex
"let g:Tex_BibtexFlavor = 'bibtex' " using bibtex
let g:Tex_UseMakefile = 0
let g:Tex_ShowErrorContext = 0
let g:Tex_AutoFolding = 0

let g:Tex_CompileRule_dvi = 'latex --interaction=nonstopmode $*'
let g:Tex_CompileRule_ps  = 'dvips -o $*.ps $*.dvi'
let g:Tex_CompileRule_pdf = 'pdflatex --interaction=nonstopmode $*'

let g:Tex_FormatDependency_ps  = 'dvi,ps'
let g:Tex_FormatDependency_pdf = 'pdf'

let g:Tex_MultipleCompileFormats = 'dvi,ps,pdf'

let g:Tex_DefaultTargetFormat = 'pdf'
"let g:Tex_DefaultTargetFormat = 'ps'

So before switching from a German to an English project a toggle the 
comments for the Tex_DefaultTargetFormat and the Tex_BibtexFlavor (and 
the spell checking options). Since this is quite inconvenient I thought 
about defining two function which do the job. I added

:function German()
:       :set spell spelllang=de_20
:       :let g:Tex_DefaultTargetFormat = 'pdf'
:       :let g:Tex_BibtexFlavor = 'biber'
:endfunction
autocmd FileType tex :command! German :cal German()

:function English()
:       :set spell spelllang=en_gb
:       :let g:Tex_DefaultTargetFormat = 'ps'
:       :let g:Tex_BibtexFlavor = 'bibtex'
:endfunction
autocmd FileType tex :command! English :cal English()

to my .vimrc. When I am calling the function English the spell checking 
and the bibliography settings are changed correctly. Even the default 
format is changed (checked by calling :TTarget) but it is not working as 
expected. After calling \ll a pdf file is still build, instead of a ps 
file. Sometimes (until now I could find out under which circumstance) a 
dvi is build, but not a ps like it should.

Any ideas what is wrong with my function definition? What do I have to 
do in order to correctly change the default target from a function. Any 
hint is appreciated.

Thanks and best regards.

Andreas



-- 

[Vim-latex-devel] IMAP is not working properly

[Gary K. <gar...@go...>]

Hello!

A short while ago I switched back from Emacs and have to write some 
Latex documents now.
So I downloaded the latex-suite via

git submodule add git://git.code.sf.net/p/vim-latex/vim-latex 
.vim/bundle/vim-latex

since my vim configuration is a repository. As you might notice, I use 
pathogen for package management.
Some features, I tried so far work fine, like <F5> for environment 
generation and <F9> for reference choice, but when I tried to use 'SSE' 
in insert mode, the result is as follows

SSE\section{<++>}<++>

so it is appending and not replacing the mapping. I read, that it is an 
IMAP, so I defined one by myself:

IMAP('sss', 'ttt', 'tex')

which also had the append effect. When writing 'sss', I get 'sssttt' 
instead of 'ttt'.
This undesired behavior seems to be independent of  the document, I 
write in. Usually, I use documents without any header at all, and put 
the document together via \input, but I also tried a minimal version 
with some documentclass defined and the document environment, without 
any package inclusion.

I use

gvim --version
VIM - Vi IMproved 7.3 (2010 Aug 15)
...

Any idea of what the problem is?

Cheers,
Gary

[Vim-latex-devel] [PATCH] Trigger citation completion on \Cite as well as \cite.

[Arne S. <arn...@gm...>]

I use BibLaTeX for my references, which has a \Cite* family of
citation commands. The attached patch makes <F9> completion work with
these commands too.

Re: [Vim-latex-devel] cite-autocompletion doesn't work as expected

[Niels K. <ni...@ko...>]

Hi,



I found now a solution and maybe it helps other. I had vim-latex
installed via a package-manager (first vundle, then NeoBundle). It
worked fine for most parts but not his. After installing vim-latex
manually, bib-autocompletion works as expected and the Outline-window
shows now up.



Niels





On Sat, Jan 25, 2014, at 21:22, Niels Kobschätzki wrote:

Hi,

I am on OS 10.9, with vim 7.4.141 or MacVim 7.4.52 and I think the
newest Latex Suite (I keep it up to date with NeoBundle).
The following error happens in vim and in MacVim
When I try to auto-complete a cite-command with F9 two splits open up.
One that shows the cite-keys. But it isn't called OUTLINE but :grep -nH
_HIGHLYIMPROPABLE__
Below that the Bibfile is shown as bib-code.
In the Quickfix-window I can move up and down with j and k and it will
move the Bib-file to the corresponding bib-entry and hitting enter will
enter the cite-key into the tex-file. But f,n and p are not working.
When I do a ":verbose map! f" I get the following output which seems to
be correct

i f * =59_LookupCharacter("f")
Last set from
~/Dropbox/Dotfiles/vim/bundle/LaTeX-Suite-aka-Vim-LaTeX/plugin/imaps.vi
m

I also thought that I get sort of abbreviated entries shown in the
window where I see the bib-code instead of the code itself.

Any ideas what could be the problem?

Niels

  Email had 1 attachment:
  * signature.asc
  *   1k (application/pgp-signature)

[Vim-latex-devel] cite-autocompletion doesn't work as expected

[Niels K. <ni...@ko...>]

Hi,

I am on OS 10.9, with vim 7.4.141 or MacVim 7.4.52 and I think the newest Latex Suite (I keep it up to date with NeoBundle).
The following error happens in vim and in MacVim
When I try to auto-complete a cite-command with F9 two splits open up. One that shows the cite-keys. But it isn't called ___OUTLINE___ but :grep -nH ____HIGHLY_IMPROPABLE____
Below that the Bibfile is shown as bib-code.
In the Quickfix-window I can move up and down with j and k and it will move the Bib-file to the corresponding bib-entry and hitting enter will enter the cite-key into the tex-file. But f,n and p are not working.
When I do a ":verbose map! f" I get the following output which seems to be correct

i  f           * <C-R>=<SNR>59_LookupCharacter("f")<CR>
        Last set from ~/Dropbox/Dotfiles/vim/bundle/LaTeX-Suite-aka-Vim-LaTeX/plugin/imaps.vim

I also thought that I get sort of abbreviated entries shown in the window where I see the bib-code instead of the code itself.

Any ideas what could be the problem?

Niels

[Vim-latex-devel] F9 Label Completion not working

[Dalon W. <dw...@gm...>]

Sorry to bug, but I'm not entirely sure what's going on here.

I'm working on my thesis, and am impressed with Latex-Suite so far.
I cannot get the \ref completion to work.
When I push F9 in an empty \ref command I get an empty __OUTLINE__ window.

So far I've made sure python support is enabled.
I have my thesis.tex.latexmain file setup in the home directory.

It is a multi-file project, with the main file thesis.tex in the main
directory.
All other included files are in a tex/ subdirectory
These are included with \include{./tex/chapter*}

I tried to get a minimal (not) working example with a main file and two
included files
with the same directory structure, only to find out that the \ref
completion actually works for that
project!

My question is this: any ideas on what could be going wrong, and how can I
go about debugging this to find out what is going wrong?

Thanks!

Dalon



-- 
Dalon Work

Re: [Vim-latex-devel] IMAP definitions in ~/.vimrc

[Ruthard B. <rut...@we...>]

>== Auszüge aus der Nachricht von  Vandra vom 2013-12-25 17:38:
> Dear developpers,
> 
> Is it possible to make IMAP definitions not in
> /.vim/ftplugin/latex-suite/main.vim
> but just in ~/.vimrc?
> (actually my .vimrc source a file located in cloud so I have the same vim
> config on several computers)
> When I try to define a macros in ~/.vimrc:
> call IMAP (g:Tex_Leader.'R', "\\replaced[id=il]{<++>}{", 'tex')
> it says that IMAP command not found.

put a line

  source /path/to/.vim/plugin/imaps.vim

above your IMAP call and it should work

Yours,

Ruthard

Re: [Vim-latex-devel] Cannot compile tex file on Windows ( it's OK on Mac)

[YANG L. <lin...@gm...>]

After nearly one year, I finally got the point.
Because I am using pathogen to manage all plugins of vim, and in some
previous version of vim-latex, there is no "compiler" folder in the plugin,
so everything is compatible with pathogen.
but after some updates, the compiler folder emerged, and need to be copied
to the installation path of vim. On Windows, vim cannot handle such
situation, so no "TCLevel" command and no initialization of "s:target",
therefore cannot compile the source file. However, on OSX, it's OK.
So just copy the compiler folder to vim and everything is fine.
Happy new year!


On Wed, Jan 30, 2013 at 12:31 AM, Ted Pavlic <tp...@as...> wrote:

> Can you be more specific about the update?
>
> Are you pulling from the code repository directly? If so, do you know the
> changeset (or at least range of possible changesets) that caused the
> problem?
>
>   --Ted
>
> --
> Sent from the mobile device of Ted Pavlic.
> Please excuse typos, swypos, or very brief responses.
> On Jan 29, 2013 2:54 AM, "YANG LINCHANG" <lin...@gm...> wrote:
>
>> Hi there,
>> first, thank you for developing such a good plugin for tex users. It
>> worked fine on both of my Windows desktop and Macbook Pro.
>> However, I encountered the problem after one update of vim-latex that it
>> cannot work on Windows.
>> When I press /ll to compile, vim will throw out a series of error
>> messages:
>>
>> Error detected while processing function Tex_RunLaTeX:
>> line 7:
>> E121: Undefined variable: s:target
>> E15: Invalid expression: s:target
>> line 10:
>> E121: Undefined variable: s:target
>> E116: Invalid arguments for function Tex_Debug
>> line 12:
>> E121: Undefined variable: s:target
>> E116: Invalid arguments for function
>> Tex_GetVarValue('Tex_FormatDependency_'.s:t
>> arget) != ''
>> E15: Invalid expression:
>> Tex_GetVarValue('Tex_FormatDependency_'.s:target) != ''
>>
>> line 21:
>> E121: Undefined variable: dependency
>> E116: Invalid arguments for function Tex_Debug
>> line 25:
>> E121: Undefined variable: dependency
>> E116: Invalid arguments for function Tex_Strntok(dependency, ',', i) !=
>> ''
>> E15: Invalid expression: Tex_Strntok(dependency, ',', i) != ''
>> line 51:
>> E121: Undefined variable: initTarget
>> E15: Invalid expression: initTarget
>>
>> And also the similar error messages of \lv and \ls.
>>
>> but I can still compile .tex files on Mac. It seems that the malfunction
>> is related to the target format and I set the right
>> "g:Tex_DefaultTargetFormat" in my .vimrc and it used to work.
>> please advise me some possible solutions.
>> regards
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Master Visual Studio, SharePoint, SQL, ASP.NET, C# 2012, HTML5, CSS,
>> MVC, Windows 8 Apps, JavaScript and much more. Keep your skills current
>> with LearnDevNow - 3,200 step-by-step video tutorials by Microsoft
>> MVPs and experts. ON SALE this month only -- learn more at:
>> http://p.sf.net/sfu/learnnow-d2d
>> _______________________________________________
>> Vim-latex-devel mailing list
>> Vim...@li...
>> https://lists.sourceforge.net/lists/listinfo/vim-latex-devel
>>
>>

Re: [Vim-latex-devel] IMAP definitions in ~/.vimrc

[Peng S. <sha...@gm...>]

I put them in the after directory:

.vim/after/ftplugin/tex.vim

to avoid modifying main.vim.

Hopefully it helps if .vimrc is not the right place IMAP should go.




On Wed, Dec 25, 2013 at 11:38 AM, Vandra <va...@ra...> wrote:

> Dear developpers,
>
> Is it possible to make IMAP definitions not in
> /.vim/ftplugin/latex-suite/main.vim
> but just in ~/.vimrc?
> (actually my .vimrc source a file located in cloud so I have the same vim
> config on several computers)
> When I try to define a macros in ~/.vimrc:
> call IMAP (g:Tex_Leader.'R', "\\replaced[id=il]{<++>}{", 'tex')
> it says that IMAP command not found.
> Preceeding it by
> au FileType tex so ~/.vim/ftplugin/tex_latexSuite.vim
> does not help.
>
> Thank you
>
>
> ------------------------------------------------------------------------------
> Rapidly troubleshoot problems before they affect your business. Most IT
> organizations don't have a clear picture of how application performance
> affects their revenue. With AppDynamics, you get 100% visibility into your
> Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics
> Pro!
> http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
> _______________________________________________
> Vim-latex-devel mailing list
> Vim...@li...
> https://lists.sourceforge.net/lists/listinfo/vim-latex-devel
>

[Vim-latex-devel] IMAP definitions in ~/.vimrc

[Vandra <va...@ra...>]

Dear developpers,

Is it possible to make IMAP definitions not in
/.vim/ftplugin/latex-suite/main.vim
but just in ~/.vimrc?
(actually my .vimrc source a file located in cloud so I have the same vim
config on several computers)
When I try to define a macros in ~/.vimrc:
call IMAP (g:Tex_Leader.'R', "\\replaced[id=il]{<++>}{", 'tex')
it says that IMAP command not found.
Preceeding it by
au FileType tex so ~/.vim/ftplugin/tex_latexSuite.vim
does not help.

Thank you

[Vim-latex-devel] tex-file auto-close if error while tex-build

[<mo...@po...>]

If an error or warning occurse while a tex-build the vim-latexsuite
show me the error message (open the error-log) and show me the error
occuring position in the source (open the source file).

Problem is that if the error occurse not in my tex-file but in a
sub-file (toc, bib, toc1, ...) vim-latexsuite close my tex-file and
open the sub-file.

Then I have to close everything and restart vim-latexssuite to come
back to my own tex-file.

Is there a way to fix that behaviour?

[Vim-latex-devel] settings still for bibtex and not for biber

[Mauro S. <mau...@gm...>]

For from a rather long time the default backend for biblatex
is biber and no more bibtex, why configuration files of latex-suite
are not yet up-to-date, but continue to set bibtex as default?
do u think do change this default?

thanx
ms

-- 
Linux user no.: 353546
public key at http://keyserver.linux.it

Re: [Vim-latex-devel] Templates require set paste on

[Ruthard B. <rut...@we...>]

>== Auszüge aus der Nachricht von  John Reid vom 2013-11-05 10:18:
> Hi,
> 
> If I don't do ':set paste on' before using ':TTemplate', the indentation
> of the template is all messed up. Is it possible to get vim-latex to
> turn this on when using templates?

To convince vim-latex to do that you have to hack the source -- and every
update would make your efforts worthless ;-(

BUT...

it is possible to define functions and commands in your .vimrc, or
better in a .vim/after/ftplugin/tex.vim file that would be loaded as
filetype plugin after vim-latex has been loaded.

You have to create the "after/ftplugin" directories and the "tex.vim" file
if they do not exist yet.

In vim a function is defined like this (confere to :help function):

------------------->%-----------------------
function SetPasteTTemplate() 
    set paste
    TTemplate
    set nopaste
endfunction
------------------->%-----------------------

and is called: 

    :call SetPasteTTemplate()

Typing all this is a bit tedious over the time and not a lot better than typing
:set paste, :TTTemplate, :set nopaste, so let's define a handy command
(cf. :help command) in our .vimrc or .vim/after/ftplugin/tex.vim!

------------------->%-----------------------
command TT call SetPasteTTemplate()
------------------->%-----------------------

et voilà -- type :TT in command mode and you've got it.

Thank you for asking -- I wanted to figure this out for years, and just
didn't have the idea of using .vimrc instead of the vim-latex source.
This way it's easy, works, and won't be messed up by the next vim-latex
update :-)

Greetings, Ruthard

[Vim-latex-devel] Tex_env variables

[Francesco M. <fra...@gm...>]

Hi,

I'm using vim-latex under opensuse 13.1, vim 7.4.52, vim-latex github
master (I use pathogen and git submodules for organising the plugins)

I am customizing the figure environments.

I managed to modify the default figure environment adding

let g:Tex_Env_figure = "..."


into my .vimrc/ftplugin/tex.vim.

Then I want to add a Tex_Env_figure* (for page wide figures). According to
the documentation<http://vim-latex.sourceforge.net/documentation/latex-suite/customizing-macros.html#Tex_Env_name>
I
should be able to

> let g:Tex_Env_{'figure*'} = "..."


but I get an error "E461: Illegal variable name: Tex_Env_figure*".
Is this a bug?

So for now, I use "let g:Tex_Env_figures" and if I type "figures" and then
hit <F5> it works as desired.

Cheers,
Fra

[Vim-latex-devel] Vim & biber: empty bibliography

[Mauro S. <mau...@gm...>]

Although I read some posts on the net about vim and biber, still I'm not 
able to compile correctly. Following some suggestion, I put in my texcr (at 
line 96)
=======================================================
TexLet g:Tex_MultipleCompileFormats = 'pdf,bbl'
=======================================================
and at line 126
=======================================================
TexLet g:Tex_BibtexFlavor = 'biber'
=======================================================
Moreover, I changed my compiler.vim this way at lines 567-8:
=======================================================
if runCount == 0 && Tex_IsPresentInFile('\\bibdata', 
mainFileName_root.'.bcf')
let bibFileName = mainFileName_root.'.bbl'
=======================================================
However, during the compilation I receive the message:
=======================================================
LaTeX Warning: Empty Bibliography on line 27
=======================================================
(the line of the source file tex where I put \printbibliography). I find 
only bcf file, not bbl nor blg So I really I don'k know what else I can 
do to solve

thanx
m

-- 
Linux user no.: 353546
public key at http://keyserver.linux.it

[Vim-latex-devel] Vimlatex customization

[Mario D <eg...@gm...>]

Hi all,

I just installed vim-latex on an Ubuntu system with vim 7.3.429.

I extracted the source vim-latex-1.8.23-20130116.788-git2ef9956.tar.gz and
then I ran Make install and it installed in
/usr/local/share/vim.

To use it, I added
set runtimepath^=/usr/local/share/vim
to my .vimrc

and everything is fine: it works perfectly (BTW, thanks a lot for this
wonderful script!).

The problem is when I try to customize it: following the instructions in
texrc, I created the file
~/.vim/ftplugin/tex.vim
Inside it, I put:

let g:Tex_CompileRule_dvi = 'vimlatex latex -interaction=nonstopmode
-src-special $*'
let g:Tex_ViewRuleComplete_dvi = 'xdvi 2>/dev/null'
let g:Tex_ViewRule_dvi = 'xdvi 2>/dev/null'
let g:Tex_Folding = '0'
let g:Tex_AutoFolding = '0'
let g:Tex_Leader = ','

let g:Tex_UseUtfMenus = '1'
call IMAP('sss', '^{<++>}<++>', 'tex')

When I open a tex file, this is correctly source since, for example, the
sss map works correctly. I can also see that the variables get the correct
value; yet, some of them do not have the expected result. Namely:
- The file is opened folded, despite Folding and AoutFolding are 0.
- Leader is still `  (and, again, :let Tex_Leader  returns , correctly)
- In the menu Tex-Math I don't see the graphic of the symbols
- Also, I had to set _both_  Tex_ViewRule_dvi and Tex_ViewRuleComplete_dvi:
setting only one of them I missed one of the ,ls or ,lv shortcuts

Please note that if I make all the changes in
/usr/local/share/vim/ftplugin/latex-suite/texrc
then everything works as expected but, as indicated in the starting comment
of texrc, I would prefer not to do so, so that I do not have to bother in
case of upgrade.

Can someone please help me? Am I missing something?

Thanks a lot

Mario