unable to mount non-system drive after upgrading non-encrypted OS drive

[lso1]

Hi all,

Cross posting from General Discussion.

I recently cloned my OS drive to move from 500GB to 1TB SSD. I have an encrypted 5TB drive that I used to be able to automount when I was on the 500GB OS drive. After moving to the 1TB drive i am unable to mount/automount and get the error https://imgur.com/a/vcgzRMC

I still have my 500GB OS drive and changed my boot order to use that instead and I am able to automount the drive. I have no clue what's going on.

Here are the available devices to select from. https://imgur.com/a/1wgMgii
Harddisk 1 is the encrypted drive. Here is when I am booted to the OS drive and mounted the encrypted drive. https://imgur.com/a/Ztq4nXB

I am running the Veracrypt v1.24 and on Windows 10.

[Adrian Kentleton]

Does the 'Select a Partition or Device' (1wgMgii) appear identical when you boot from the 1TB drive?

[lso1]

Aside from labels yes.

https://imgur.com/a/wv9QHw8

[Mounir IDRASSI]

@lso1: Did you try enabling automount in Windows as I explained this old post: https://sourceforge.net/p/veracrypt/discussion/technical/thread/5948980c/#106d

[lso1]

@idrassi Thank you for solving my problem!

For people in future, if you have issues mounting

1.Run CMD prompt as administrator

1. Type DISKPART and enter.
2. Type AUTOMOUNT

If it comes back as disabled type AUTOMOUNT ENABLE and restart. Fixed my problem.