Re: [uml-user] ifconfig: EUNATCH during boot

[BlaisorBlade <bla...@ya...>]

On Monday 06 September 2004 20:03, Andreas Schuldei wrote:
> * BlaisorBlade (bla...@ya...) [040906 19:58]:
> > On Monday 06 September 2004 10:04, Andreas Schuldei wrote:
> > > i get this during boot up of my uml (2.4.24-um2) on top of 2.6.8
> > >
> > > host:
> > > > Mounted devfs on /dev
> > > > builder running...
> > > > Using rootstrap module network from:
> > > >         /usr/lib/rootstrap/modules/network
> > > > + '[' 192.168.10.2 = dhcp ']'
> > > > + set +e
> > > > + ifconfig eth0
> > > > eth0      Link encap:Ethernet  HWaddr 00:00:00:00:00:00
> > > >           BROADCAST MULTICAST  MTU:1500  Metric:1
> > > >           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > > >           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> > > >           collisions:0 txqueuelen:1000
> > > >           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
> > > >           Interrupt:5
> > > >
> > > > + ifconfig eth0 192.168.10.2 netmask 255.255.255.252
> > > > read_output - read of data failed, err = -49
> > >
> > > 49 is EUNATCH. how do i fix this?
> >
> > Hmmm, never seen that error. What is your network setup? And why that
> > netmask?
>
> on the host side? does it matter at this point? i have the tun
> module loaded, and otherwise i have a normal eth0 with a /24
> private net. Very standard, really. apart from that, you see the
> uml networking setup right there, and local loopback of cause.
Yes - read_output is call when uml_net is started. There may still be some 
other problems, like not correct installaction of uml_utilities, maybe.
-- 
Paolo Giarrusso, aka Blaisorblade
Linux registered user n. 292729