[uml-user] Making SUSE 9.1 iso

[Franck <fr...@li...>]

=2D----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

i've make a SUSE9.1 UML with this command (thanks Leendert) :
1/ On my laptop
=2D - YaST -> Software -> Install into a directory
=2D - non SUSE config
=2D - make iso but i couldn't mount it :(
=2D - cd /var/tmp/dirinstall
=2D - tar cvjfp ~franck/mini-suse91.tar.bz *
=2D - ncftp to my host (linux computer)

2/ On my linux computer (2.6.6-skas patchs)
=2D - dd if=3D/dev/zero of=3Dpath_name_of_image_file count=3D0 bs=3D1G seek=
=3D1
=2D - mkfs.ext3 path_name_of_image_file (must be to mount reseifs iso :( )
=2D - mkreiserfs -ff path_name_of_image_file
=2D - mount -o loop path_name_of_image_file mount_dir
=2D - cd mount_dir
=2D - tar xvjfp mini-suse91.tar.bz
=2D - making a valid fstab
=2D - umount mount_dir

(path_name_of_image_file =3D 91-1) <=3D UML SUSE 9.1

3/ booting UML SUSE 9.1
=2E/linux-uml-2.4.26-full-in-2 \
umid=3Dsuse91 \
ubd0=3D91-1 \
ubd1=3Dswap91 \
mem=3D256M \
showopts \
eth0=3Dtuntap,,,192.168.0.101 \
fakehd fake_ide ubd=3D3 \
root=3D/dev/ubd0 \
hwprobe=3D-sys \
con=3Dxterm con0=3Dfd:0,fd:1

4/ That's work a little but block on :
=2E................
Activating remaining swap-devices in /etc/fstab... done
Loading required kernel modules  done
Setting up the CMOS clockhwclock is unable to get I/O port access:  the=20
iopl(3) call failed.
hwclock is unable to get I/O port access:  the iopl(3) call failed. failed
Setting scheduling timeslices  unused
Setting up hostname 'linux'    done
Setting up loopback interface     lo
/sbin/ifup: line 298: /dev/fd/62: No such file or directory
    lo        IP address: 127.0.0.1/8
/etc/sysconfig/network/scripts/ifup-route: line 461: /dev/fd/62: No such fi=
le=20
or directory
/sbin/ifup: line 766: /dev/fd/62: No such file or directory
/etc/sysconfig/network/scripts/ifup-route: line 1: /dev/fd/61: No such file=
 or=20
directory
/etc/sysconfig/network/scripts/ifup-route: line 1: /dev/fd/62: No such file=
 or=20
directory done
Disabling IP forwarding  done
Disabling IPv6 forwarding  done
Creating /var/log/boot.msg  done
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
open(/dev/tty1): No such file or directory
System Boot Control: The system has been  set up
Skipped features:                                                          =
      =20
boot.sched
System Boot Control: Running /etc/init.d/boot.local             done
INIT: Entering runlevel: 3

And block HERE :(

Could anyone help me ?
=2D --=20
=46ranck

http://www.linuxpourtous.com
=2D----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFAwOP31zwfep5k9qERAjhQAJ4kAfpPp4GRQAooG4CQdpZ+v/pu7QCgnnBH
hPH2FrUOJbtVnKotsyzmXXA=3D
=3DzCpq
=2D----END PGP SIGNATURE-----