Menu
▾
▴
Re: [uml-user] removing xterm spawning
|
From: Dan L. <ar...@co...> - 2004-05-14 19:30:55
|
I use RH8, but I reference the ttys/0 myself. I also use devfs, so without devfs it'd be ttys0.... I guess it can't hurt to try it, since you don't have tty0. --Dan Terry wrote: >Thanks for your reply. I didn't have it listed but I >am getting same behavior with that fixed. However, >some interesting things I found.... > >I get this error in my bootup. I am not sure when it >started showing up. But it's interesting: >/etc/rc.d/rc.sysinit: line 34: /dev/tty0: Permission >denied > >This references this code in rc.sysinit: > for i in `LC_ALL=C grep >'^[0-9].*respawn:/sbin/mingetty' /etc/inittab | sed >'s/^.* tty\([0-9][0-9]*\).*/\1/g'`; do > > /dev/tty$i > last=$i > done > >A look at /dev posed some interesting things as well: >[root@myserver root]# ls -l /dev/tty* >crw-rw-rw- 1 root root 5, 0 Dec 31 1969 /dev/tty >lr-xr-xr-x 1 root root 2 Dec 31 1969 /dev/ttys -> >vc > >There is no tty0 or tty1 or anything....do I have to >create the device? > >--- jur...@ph... wrote: > > >>Also have a look at /etc/securettys. If tty0 is not >>mentioned >>there you will not get a login prompt in the term >>you started >>the UML from. >> >>Jurgen >> >> >> >> >> >> >> >> >> >> >>Terry <td...@ya...> >>Sent by: >>use...@li... >>2004-05-14 04:32 AM >> >> >> To: Dan Lund <ar...@co...> >> cc: >>use...@li... >>(bcc: Jurgen Defurne/BRG/CE/PHILIPS) >> Subject: Re: [uml-user] removing >>xterm spawning >> Classification: >> >> >> >> >>I did that and same behavior... >> >> >>--- Dan Lund <ar...@co...> wrote: >> >> >>>I noticed you don't have an init entry for tty0. >>> >>>Add this line above the rest of the tty entries in >>>the inittab: >>> >>>0:2345:respawn:/sbin/mingetty tty0 >>> >>>That should give you the first console. >>> >>> >>> >>>Terry wrote: >>> >>> >>> >>>>Hrm, I can't get a login prompt to appear after >>>> >>>> >>>init >>> >>> >>>>finishes runlevel 3. >>>> >>>>I then get: >>>>INIT: Id "1" respawning too fast: disabled for 5 >>>>minutes >>>>INIT: no more processes left in this runlevel >>>> >>>> >>>> >>>>--- Dan Lund <ar...@co...> wrote: >>>> >>>> >>>> >>>> >>>>>Well, I personally use "con0=fd:0,fd:1 con=pty" >>>>> >>>>> >>>and >>> >>> >>>>>that's been working >>>>>great for me. >>>>>I do the same as you, using screen as the >>>>> >>>>> >>console. >> >> >>>>>Give that a shot, tell us how it goes. >>>>> >>>>>--Dan >>>>> >>>>>Terry wrote: >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>>Heh, you make it sound so simple! :) >>>>>> >>>>>>Yes, I figured that much, what do I replace it >>>>>> >>>>>> >>>>>> >>>>>> >>>>>with? >>>>> >>>>> >>>>> >>>>> >>>>>>I have been messing with this for a while on >>>>>> >>>>>> >>and >> >> >>>>>> >>>>>> >>>>>off >>>>> >>>>> >>>>> >>>>> >>>>>>and have removed those arguments and can't >>>>>> >>>>>> >>>remember >>> >>> >>>>>>the behavior when I did. >>>>>> >>>>>> >>>>>>--- Dan Lund <ar...@co...> wrote: >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>The first step you should do to remove any >>>>>>> >>>>>>> >>>xterms >>> >>> >>>>>>> >>>>>>> >>>>>is >>>>> >>>>> >>>>> >>>>> >>>>>>>to take out your >>>>>>>con0=xterm and con1=xterm commandline argument >>>>>>> >>>>>>> >>>:) >>> >>> >>>>>>>Terry wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>--- Ingo Strauch <br...@th...> >>>>>>>> >>>>>>>> >>>wrote: >>> >>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>>On Thu, 13 May 2004 11:25:06 -0700 (PDT) >>>>>>>>>Terry <td...@ya...> wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>I recently switched from a rh9 to a fc1. >>>>>>>>>> >>>>>>>>>> >>In >> >> >>>>>>>>>> >>>>>>>>>> >>>>>rh9, >>>>> >>>>> >>>>> >>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>I >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>somehow had it configured so that when I >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>started >>>>> >>>>> >>>>> >>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>the >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>kernel, my login prompt showed up in the >>>>>>>>>> >>>>>>>>>> >>main >> >> >>>>>>>>>>terminal, not in an xterm as it now behaves >>>>>>>>>> >>>>>>>>>> >>>in >>> >>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>fc1. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>Fc1 now starts and spawns 2 or 3 xterms, >>>>>>>>>> >>>>>>>>>> >>one >> >> >>>of >>> >>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>which >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>contains the final login prompt to login to >>>>>>>>>> >>>>>>>>>> >>>the >>> >>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>uml >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>instance. How can I configure it so that >>>>>>>>>> >>>>>>>>>> >>no >> >> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>xterms >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>are spawned and all input and output can be >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>received >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>on the main terminal from which uml was >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>started? >>>>> >>>>> >>>>> >>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>I >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>apologize if this is documented somewhere. >>>>>>>>>> >>>>>>>>>> >>I >> >> >>>>>>>>>> >>>>>>>>>> >>>>>am >>>>> >>>>> >>>>> >>>>> >>>>>>>>>>having difficulty finding it if it is. >>>>>>>>>> >>>>>>>>>> >>>Thanks! >>> >>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>If I understand you correctly you just need >>>>>>>>> >>>>>>>>> >>to >> >> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>edit >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>the /etc/inittab >>>>>>>>>inside the UML filesystem. It should contain >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>lines >>>>> >>>>> >>>>> >>>>> >>>>>>>>>like these >>>>>>>>> >>>>>>>>>1:2345:respawn:/sbin/mingetty tty1 >>>>>>>>>2:2345:respawn:/sbin/mingetty tty2 >>>>>>>>>3:2345:respawn:/sbin/mingetty tty3 >>>>>>>>>4:2345:respawn:/sbin/mingetty tty4 >>>>>>>>>5:2345:respawn:/sbin/mingetty tty5 >>>>>>>>>6:2345:respawn:/sbin/mingetty tty6 >>>>>>>>> >>>>>>>>>Comment all but the first and you should get >>>>>>>>> >>>>>>>>> >>>no >>> >>> >>>>>>>>>additional xterms. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>This didn't do the trick. Two xterms still >>>>>>>> >>>>>>>> >>>spawn >>> >>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>up >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>for me. Here is how I start the UML: >>>>>>>> >>>>>>>>cd /home/td3201/uml >>>>>>>>screen -d -R -S fc1 ./linux-2.4.24-2um.bin \ >>>>>>>>mem=256M \ >>>>>>>>ubd0=fedora-core1.disk \ >>>>>>>>ubd1=home_fs \ >>>>>>>>ubd2=swap \ >>>>>>>>ubd3=new_home \ >>>>>>>>eth0=tuntap,,,172.16.3.23 \ >>>>>>>>con0=xterm con1=xterm con=/dev/null >>>>>>>> >>>>>>>>Here is my inittab: >>>>>>>>id:3:initdefault: >>>>>>>>si::sysinit:/etc/rc.d/rc.sysinit >>>>>>>>l0:0:wait:/etc/rc.d/rc 0 >>>>>>>>l1:1:wait:/etc/rc.d/rc 1 >>>>>>>>l2:2:wait:/etc/rc.d/rc 2 >>>>>>>>l3:3:wait:/etc/rc.d/rc 3 >>>>>>>>l4:4:wait:/etc/rc.d/rc 4 >>>>>>>>l5:5:wait:/etc/rc.d/rc 5 >>>>>>>>l6:6:wait:/etc/rc.d/rc 6 >>>>>>>>ca::ctrlaltdel:/sbin/shutdown -t3 -r now >>>>>>>>pf::powerfail:/sbin/shutdown -f -h +2 "Power >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>Failure; >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>System Shutting Down" >>>>>>>>pr:12345:powerokwait:/sbin/shutdown -c "Power >>>>>>>>Restored; Shutdown Cancelled" >>>>>>>>1:2345:respawn:/sbin/mingetty tty1 >>>>>>>>x:5:respawn:/etc/X11/prefdm -nodaemon >>>>>>>> >>>>>>>>Thanks again for your help! >>>>>>>> >>>>>>>> >>>>>>>>===== >>>>>>>>Terry >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>__________________________________ >>>>>>>>Do you Yahoo!? >>>>>>>>Yahoo! Movies - Buy advance tickets for >>>>>>>> >>>>>>>> >>'Shrek >> >> >>>2' >>> >>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>http://movies.yahoo.com/showtimes/movie?mid=1808405861 >>>> >>>> >>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>------------------------------------------------------- >>>> >>>> >>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>This SF.Net email is sponsored by: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>SourceForge.net >>>>> >>>>> >>>>> >>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>Broadband >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>Sign-up now for SourceForge Broadband and get >>>>>>>> >>>>>>>> >>>the >>> >>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>fastest >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>6.0/768 connection for only $19.95/mo for the >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>first >>>>> >>>>> >>>>> >>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>3 months! >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click >>>> >>>> >>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>_______________________________________________ >>>>>>> >>>>>>> >>>>>>>>User-mode-linux-user mailing list >>>>>>>>Use...@li... >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>https://lists.sourceforge.net/lists/listinfo/user-mode-linux-user >>>> >>>> >>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>----------- >>>>>>>This email message and any attachment may >>>>>>> >>>>>>> >>>contain >>> >>> >>>>>>>Confidential or >>>>>>>Protected Health Information. If you are not >>>>>>> >>>>>>> >>the >> >> >>>>>>>intended recipient >>>>>>>please notify us immediately at 480-648-4545 >>>>>>> >>>>>>> >>and >> >> >>>>>>>delete the message. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>===== >>>>>>Terry >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>__________________________________ >>>>>>Do you Yahoo!? >>>>>>Yahoo! Movies - Buy advance tickets for 'Shrek >>>>>> >>>>>> >>2' >> >> >>>>>> >>>>>> >>>http://movies.yahoo.com/showtimes/movie?mid=1808405861 >>> >>> >>>>> >>>>> >>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>----------- >>>>>This email message and any attachment may >>>>> >>>>> >>contain >> >> >>>>>Confidential or >>>>>Protected Health Information. If you are not the >>>>>intended recipient >>>>>please notify us immediately at 480-648-4545 and >>>>>delete the message. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>------------------------------------------------------- >> >> >>>> >>>> >>>>>This SF.Net email is sponsored by: >>>>> >>>>> >>SourceForge.net >> >> >>>>>Broadband >>>>>Sign-up now for SourceForge Broadband and get >>>>> >>>>> >>the >> >> >>>>>fastest >>>>>6.0/768 connection for only $19.95/mo for the >>>>> >>>>> >>>first >>> >>> >>>>>3 months! >>>>> >>>>> >>>>> >>>>> >>>>> >>http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click >> >> >>>> >>>> >>>>>_______________________________________________ >>>>>User-mode-linux-user mailing list >>>>>Use...@li... >>>>> >>>>> >>>>> >>>>> >>>>> >>https://lists.sourceforge.net/lists/listinfo/user-mode-linux-user >> >> >>>>===== >>>>Terry >>>> >>>> >>>> >>>> >>>>__________________________________ >>>>Do you Yahoo!? >>>>Yahoo! Movies - Buy advance tickets for 'Shrek 2' >>>> >>>> >>http://movies.yahoo.com/showtimes/movie?mid=1808405861 >> >> >>>> >>>> >>------------------------------------------------------- >> >> >>>>This SF.Net email is sponsored by: >>>> >>>> >>SourceForge.net >> >> >>>Broadband >>> >>> >>>>Sign-up now for SourceForge Broadband and get the >>>> >>>> >>>fastest >>> >>> >>>>6.0/768 connection for only $19.95/mo for the >>>> >>>> >>first >> >> >>>3 months! >>> >>> >>> >>http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click >> >> >>>>_______________________________________________ >>>>User-mode-linux-user mailing list >>>>Use...@li... >>>> >>>> >>https://lists.sourceforge.net/lists/listinfo/user-mode-linux-user >> >> >>>> >>>> >>>> >>>----------- >>>This email message and any attachment may contain >>>Confidential or >>>Protected Health Information. If you are not the >>>intended recipient >>>please notify us immediately at 480-648-4545 and >>>delete the message. >>> >>> >>===== >>Terry >> >> >> >> >>__________________________________ >>Do you Yahoo!? >>Yahoo! Movies - Buy advance tickets for 'Shrek 2' >> >> >> >http://movies.yahoo.com/showtimes/movie?mid=1808405861 > > >> >> >> >> >------------------------------------------------------- > > >>This SF.Net email is sponsored by: SourceForge.net >>Broadband >>Sign-up now for SourceForge Broadband and get the >>fastest >>6.0/768 connection for only $19.95/mo for the first >>3 months! >> >> >> >http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click > > >>_______________________________________________ >>User-mode-linux-user mailing list >>Use...@li... >> >> >> >https://lists.sourceforge.net/lists/listinfo/user-mode-linux-user > > >> >> >> >> >> >> >------------------------------------------------------- > > >>This SF.Net email is sponsored by: SourceForge.net >>Broadband >>Sign-up now for SourceForge Broadband and get the >>fastest >>6.0/768 connection for only $19.95/mo for the first >>3 months! >> >> >> >http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click > > >>_______________________________________________ >>User-mode-linux-user mailing list >>Use...@li... >> >> >> >https://lists.sourceforge.net/lists/listinfo/user-mode-linux-user > > >===== >Terry > > > > >__________________________________ >Do you Yahoo!? >SBC Yahoo! - Internet access at a great low price. >http://promo.yahoo.com/sbc/ > > >------------------------------------------------------- >This SF.Net email is sponsored by: SourceForge.net Broadband >Sign-up now for SourceForge Broadband and get the fastest >6.0/768 connection for only $19.95/mo for the first 3 months! >http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click >_______________________________________________ >User-mode-linux-user mailing list >Use...@li... >https://lists.sourceforge.net/lists/listinfo/user-mode-linux-user > > > ----------- This email message and any attachment may contain Confidential or Protected Health Information. If you are not the intended recipient please notify us immediately at 480-648-4545 and delete the message. |