Re: [Turnserver-users] Install TurnServer-0.5 on centos / x86

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

Hi,

It seems that this crash has been fixed in SVN revision few month ago
(we will do a release soon with all the fixes since version 0.5). Can
you try with the SVN trunk ? And be sure to "./configure
--enable-debug-build" to have some debug information when you run the
program.

Regards,
--
Seb

Le 17/02/12 12:44, Gentle Yang a écrit :
> The following:
>
> "
>
> [root@localhost turnserver-work]# valgrind --leak-check=yes turnserver
> -c turnserver.conf
> ==15937== Memcheck, a memory error detector
> ==15937== Copyright (C) 2002-2009, and GNU GPL'd, by Julian Seward et al.
> ==15937== Using Valgrind-3.5.0 and LibVEX; rerun with -h for copyright
> info
> ==15937== Command: turnserver -c turnserver.conf
> ==15937==
>
> ==15937== Invalid read of size 4
> ==15937== at 0x8058C83: tmpuser_destroy (in /usr/local/bin/turnserver)
> ==15937== by 0x8052684: main (in /usr/local/bin/turnserver)
> ==15937== Address 0x0 is not stack'd, malloc'd or (recently) free'd
> ==15937==
> ==15937==
> ==15937== Process terminating with default action of signal 11 (SIGSEGV)
> ==15937== Access not within mapped region at address 0x0
> ==15937== at 0x8058C83: tmpuser_destroy (in /usr/local/bin/turnserver)
> ==15937== by 0x8052684: main (in /usr/local/bin/turnserver)
> ==15937== If you believe this happened as a result of a stack
> ==15937== overflow in your program's main thread (unlikely but
> ==15937== possible), you can try to increase the size of the
> ==15937== main thread stack using the --main-stacksize= flag.
> ==15937== The main thread stack size used in this run was 10485760.
> ==15937==
> ==15937== HEAP SUMMARY:
> ==15937== in use at exit: 5,698 bytes in 182 blocks
> ==15937== total heap usage: 334 allocs, 152 frees, 68,705 bytes allocated
> ==15937==
> ==15937== 64 bytes in 2 blocks are possibly lost in loss record 24 of 34
> ==15937== at 0x4005B83: malloc (vg_replace_malloc.c:195)
> ==15937== by 0x8058B0F: turnserver_cfg_parse (in
> /usr/local/bin/turnserver)
> ==15937== by 0x8051AF3: main (in /usr/local/bin/turnserver)
> ==15937==
> ==15937== LEAK SUMMARY:
> ==15937== definitely lost: 0 bytes in 0 blocks
> ==15937== indirectly lost: 0 bytes in 0 blocks
> ==15937== possibly lost: 64 bytes in 2 blocks
> ==15937== still reachable: 5,634 bytes in 180 blocks
> ==15937== suppressed: 0 bytes in 0 blocks
> ==15937== Reachable blocks (those to which a pointer was found) are
> not shown.
> ==15937== To see them, rerun with: --leak-check=full --show-reachable=yes
> ==15937==
> ==15937== For counts of detected and suppressed errors, rerun with: -v
> ==15937== ERROR SUMMARY: 2 errors from 2 contexts (suppressed: 27 from 8)
> Segmentation fault
> [root@localhost turnserver-work]#
>
> "
>
>
>
>
>
>
> 在 2012年2月17日 下午7:32，Sebastien Vincent <se...@ji...
> <mailto:se...@ji...>>写道：
>
>     Hi,
>
>     Please run turnserver with valgrind and give us the output.
>
>     Best regards,
>     --
>     Seb
>
>     Le 17/02/12 12:23, Gentle Yang a écrit :
>>     Thanks for your swift reply.
>>
>>     1 "Do you have setup "account_file" property in turnserver.conf ?
>>     and also provide the turnusers.txt file in the location provided
>>     by "account_file" property ?"
>>
>>     >> Yes, the account_file is at correct location with
>>     turnserver.conf , and I checked the account configure
>>     parameters(account_method,account_file) in turnserver.conf .
>>
>>     2 I tried to uninstall it,and installed it again :
>>
>>     "
>>     cd /usr/local/src/
>>     bunzip2 -k turnserver-0.5.tar.bz2
>>     tar xvf turnserver-0.5.tar
>>
>>     cd turnserver-0.5
>>     autoreconf -i
>>     ./configure
>>     make
>>     make install
>>     "
>>
>>     Then copy extra/turnserver.conf.template and
>>     extra/turnusers.txt.template to my work dir:
>>     /root/temp/turn-test/turnserver-work, and change
>>     thelisten_address to my ip,and run it: turnserver -c turnserver.conf
>>     The error now is "Segmentation fault".
>>     Here is my shell history and output:
>>
>>     "
>>     [root@localhost turnserver-work]# pwd
>>     /root/temp/turn-test/turnserver-work
>>     [root@localhost turnserver-work]#
>>     [root@localhost turnserver-work]# ll /usr/local/src/turnserver-0.5
>>     total 780
>>     -rw-r--r-- 1 1000 1000 11529 Sep 21 2009 acinclude.m4
>>     -rw-r--r-- 1 1000 1000 37397 Feb 16 10:40 aclocal.m4
>>     -rw-r--r-- 1 1000 1000 4733 Jul 27 2008 aminclude.am
>>     <http://aminclude.am>
>>     -rw-r--r-- 1 1000 1000 54 Apr 6 2009 AUTHORS
>>     drwxr-xr-x 2 1000 1000 4096 Feb 16 10:40 autom4te.cache
>>     -rw-r--r-- 1 1000 1000 3688 Jun 10 2011 ChangeLog
>>     -rwxr-xr-x 1 1000 1000 3769 Jun 10 2011 compile
>>     -rw-r--r-- 1 root root 8497 Feb 17 15:13 config.h
>>     -rw-r--r-- 1 root root 7982 Feb 16 10:40 config.h.in
>>     <http://config.h.in>
>>     -rw-r--r-- 1 1000 1000 8053 Jun 10 2011 config.h.in
>>     <http://config.h.in>~
>>     -rw-r--r-- 1 root root 47048 Feb 17 15:13 config.log
>>     -rwxr-xr-x 1 root root 34587 Feb 17 15:13 config.status
>>     -rwxr-xr-x 1 1000 1000 319503 Feb 16 10:40 configure
>>     -rw-r--r-- 1 1000 1000 3470 Jan 7 2011 configure.in
>>     <http://configure.in>
>>     -rw-r--r-- 1 1000 1000 35147 Jul 27 2008 COPYING
>>     -rwxr-xr-x 1 1000 1000 18615 Jun 10 2011 depcomp
>>     drwxr-xr-x 2 1000 1000 4096 Jun 10 2011 doc
>>     -rw-r--r-- 1 1000 1000 63493 Jul 6 2010 Doxyfile
>>     drwxr-xr-x 2 1000 1000 4096 Feb 17 15:19 extra
>>     -rw-r--r-- 1 1000 1000 15578 Jun 10 2011 INSTALL
>>     -rwxr-xr-x 1 1000 1000 13663 Jun 10 2011 install-sh
>>     -rw-r--r-- 1 1000 1000 2236 Jul 16 2010 LICENSE
>>     -rw-r--r-- 1 1000 1000 6279 Jul 27 2008 LICENSE.OpenSSL
>>     -rw-r--r-- 1 root root 22863 Feb 17 15:13 Makefile
>>     -rw-r--r-- 1 1000 1000 307 Dec 15 2008 Makefile.am
>>     -rw-r--r-- 1 root root 25294 Feb 16 10:40 Makefile.in
>>     drwxr-xr-x 2 1000 1000 4096 Feb 17 15:13 man
>>     -rwxr-xr-x 1 1000 1000 11419 Jun 10 2011 missing
>>     -rw-r--r-- 1 1000 1000 0 Jul 27 2008 NEWS
>>     -rw-r--r-- 1 1000 1000 5095 May 17 2011 README
>>     drwxr-xr-x 3 1000 1000 4096 Feb 17 15:13 src
>>     -rw-r--r-- 1 root root 23 Feb 17 15:13 stamp-h1
>>     drwxr-xr-x 3 1000 1000 4096 Feb 17 15:13 test
>>     [root@localhost turnserver-work]#
>>     [root@localhost turnserver-work]# which turnserver
>>     /usr/local/bin/turnserver
>>     [root@localhost turnserver-work]# pwd
>>     /root/temp/turn-test/turnserver-work
>>     [root@localhost turnserver-work]# ll
>>     total 8
>>     -rw-r--r-- 1 root root 2335 Feb 17 15:20 turnserver.conf
>>     -rw-r--r-- 1 root root 36 Feb 17 15:20 turnusers.txt
>>     [root@localhost turnserver-work]#
>>     [root@localhost turnserver-work]# turnserver -c turnserver.conf
>>
>>     Segmentation fault
>>     [root@localhost turnserver-work]#
>>     "
>>
>>     Thanks again.
>>
>>
>>     在 2012年2月17日 下午3:45，Sebastien Vincent <se...@ji...
>>     <mailto:se...@ji...>>写 道：
>>
>>         Hi,
>>
>>         Do you have setup "account_file" property in turnserver.conf
>>         ? and also provide the turnusers.txt file in the location
>>         provided by "account_file" property ?
>>
>>         Please describe _all_ you did (tar -xjvf, ..., cp
>>         extra/turnserver.conf.template /usr/..., ...) and also post
>>         the output of the program.
>>
>>         Regards,
>>         --
>>         Seb
>>
>>         Le 17/02/12 08:10, Gentle Yang a écrit :
>>>         Hi all:
>>>
>>>         I tried to install TurnServer-0.5 on centos (x86, ipv4) with
>>>         the following shell:
>>>
>>>         autoreconf -i
>>>         ./configure--enable-debug-build
>>>
>>>
>>>         make
>>>         make install
>>>
>>>
>>>         And it looks like everything is ok, but when I run the
>>>         command "turnserver -c /usr/local/etc/turn/turnserver.conf"
>>>         at "/usr/local/etc/turn/" ,it just output the text in
>>>         turnserver.conf and then it's over without any system
>>>         process . Is there something wrong or I missed ? Many thanks.
>>>
>>>         Chris
>>>
>>>
>>>
>>>
>>>
>>>         ------------------------------------------------------------------------------
>>>         Virtualization & Cloud Management Using Capacity Planning
>>>         Cloud computing makes use of virtualization - but cloud computing 
>>>         also focuses on allowing computing to be delivered as a service.
>>>         http://www.accelacomm.com/jaw/sfnl/114/51521223/
>>>
>>>
>>>         _______________________________________________
>>>         Turnserver-users mailing list
>>>         Tur...@li... <mailto:Tur...@li...>
>>>         https://lists.sourceforge.net/lists/listinfo/turnserver-users
>>
>>
>>         ------------------------------------------------------------------------------
>>         Virtualization & Cloud Management Using Capacity Planning
>>         Cloud computing makes use of virtualization - but cloud computing
>>         also focuses on allowing computing to be delivered as a service.
>>         http://www.accelacomm.com/jaw/sfnl/114/51521223/
>>         _______________________________________________
>>         Turnserver-users mailing list
>>         Tur...@li...
>>         <mailto:Tur...@li...>
>>         https://lists.sourceforge.net/lists/listinfo/turnserver-users
>>
>>
>
>