[Tsemgr-linux] tsemgr-0.08 and nokia 6600

[gat <ga...@bl...>]

Hi there guys!
This software is really great :) and hope someone got a clue for my
problem.. 

i just installed tsemgr-0.08 to make it work with my nokia 6600, but
i've got problems doing about anything :(

i'll show you the whole thing from the start:

[root@marvin root]# hcitool scan
Scanning ...
        00:0E:6D:0A:17:6F       Gat

ok, i've got a phone somewhere :)

[root@marvin root]# sdptool browse 00:0E:6D:0A:17:6F

(.....)

Service Name: OBEX Object Push
Service RecHandle: 0x10003
Service Class ID List:
  "OBEX Object Push" (0x1105)
Protocol Descriptor List:
  "L2CAP" (0x0100)
  "RFCOMM" (0x0003)
    Channel: 9
  "OBEX" (0x0008)
Language Base Attr List:
  code_ISO639: 0x656e
  encoding:    0x6a
  base_offset: 0x100
Profile Descriptor List:
  "OBEX Object Push" (0x1105)
    Version: 0x0100

so, my obex push port is 9, ok? then..


Service Name: Bluetooth Serial Port
Service Description: Bluetooth Serial Port
Service Provider: Symbian Ltd.
Service RecHandle: 0x10009
Service Class ID List:
  "Serial Port" (0x1101)
Protocol Descriptor List:
  "L2CAP" (0x0100)
  "RFCOMM" (0x0003)
    Channel: 2
Language Base Attr List:
  code_ISO639: 0x656e
  encoding:    0x6a
  base_offset: 0x100

..my bluetooth serial port is on channel 2..

let's see..

[root@marvin root]# rfcomm show
[root@marvin root]# rfcomm bind 0 00:0E:6D:0A:17:6F 2
[root@marvin root]# rfcomm show
rfcomm0: 00:0E:6D:0A:17:6F channel 2 clean 

i binded my channel 2 on rfcomm0.. after that i open my tsemgr.

under "Config":

device: /dev/rfcomm0
bluetooth address: 00:0E:6D:0A:17:6F
obed push port: 9

now, if i upload a file on my phone, everything is ok.. but
i was already uploading/downloading with gnome-obex-send and
gnome-obex-server, so don't really need this feature..

i associate my pc as a device on my phone, under Connectivity ->
Bluetooth. asks my pin, gets association.

now, my problems are:

PHONEBOOK (BACKUP with BLUETOOTH):
My phone asks me if i want to accept a message from my pc, i say yes,
but i got: 

GET failed 0x43!

from tsemgr output.

I try the same with serial cable, my phone asks me to accept connection
from my pc, i see a bluetooth connection on my phone.

the first time i try i see my bluetooth connection blow away, and i got
this as output from tsemgr

Error writing to port: Input/output error
Comm-error sending ATZ
Unable to send break!

the second time i try is the same, but without outputs and a crash :(
(and still no bluetooth connection after a while)


LOAD PHONEBOOK
I see a bluetooth connection on my phone, tsemgr says "Loading
phonebook, entry #0) then no more connections on my phone and.. tsemgr
stops working :(

Plus, if i try to use "Remote" i got a "you are connected" message, but
with no bt connection on my phone and no "Linux Box" anywhere on my
phone :(

it's the same for each and every function (send sms, read sms..) just
some bluetooth connections and nothing else.. (note: it happens both if
i associate and if i don't associate my pc from the phone menu)

what do you think this could be?

thanks very much guys!
cheers, gat.

p.s. if you want i could also send the hcidump output.. it seemed too
long to me to be attached here :)




-- 
davide 'gat'
--------------------------------
::	ga...@bl...
::	http://www.blogo.net
::	icq #31718369
--------------------------------
"There are only two ways to live your life.
One is as though nothing is a miracle.
The other is as though everything is a miracle."
- A. Einstein