Menu
▾
▴
[TiLP-devel] [ tilp-Bugs-3108746 ] TiLP cannot open libticalcs2.so.8?
|
From: SourceForge.net <no...@so...> - 2010-11-17 08:43:36
|
Bugs item #3108746, was opened at 2010-11-14 03:35 Message generated for change (Comment added) made by debrouxl You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=118378&aid=3108746&group_id=18378 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None >Status: Closed Resolution: None Priority: 5 Private: No Submitted By: da1hammer (da1hammer) Assigned to: Nobody/Anonymous (nobody) Summary: TiLP cannot open libticalcs2.so.8? Initial Comment: The error when tilp2 is run (as $ or #tilp): tilp: error while loading shared libraries: libticalcs2.so.8: cannot open shared object file: no such file or directory Since I have tried all I can think of, including compiling as root, plus looking up any related bugs, any help would be quite nice! By the way, my current system is Linux, fedora 12, x86_64, with the libs in /usr/local/libs (as I did make install using sudo). Thanks, Da1hammer ---------------------------------------------------------------------- >Comment By: Lionel Debroux (debrouxl) Date: 2010-11-17 09:43 Message: Great to see that your problems are solved :) I wonder what caused them in the first place (since ldd `which tilp` did contain a reference to libticalcs2.so.8), but whatever. On a side note, for completeness: TILP II 1.14 (and a number of previous versions) cannot perform the ROM dump of a 86, because of a bug. Should you need to do that, until the release of TILP II 1.15, you'll have to use the SVN version of TILP. You can compile it using the http://lpg.ticalc.org/prj_tilp/download/install_tilp.sh script, which I made in order to help using bugfixed/improved versions between releases. Thanks, Lionel. ---------------------------------------------------------------------- Comment By: da1hammer (da1hammer) Date: 2010-11-17 09:26 Message: Lionel, All fixed! It works well with my SilverLink (Graphlink) and TI86! One side note, I kept getting errno=11, and it seemed that it was not talking to the calculator, but the CLI kept saying ack. It turned out that the plug into the calculator was not shoved in all the way, even though it looked and felt like it was, and, what is worse, I had this same issue back in my Fedora 9 day (b4 my big 'hard drive erase event of Oct. '09), but did not remember such until just after hours of work on resolving this side issue (Yes, CFS/ME AKA 'yuppie flu' of mine probably got in the way, fogging my mind (which I also blame somewhat for the erasure event!). Anyway, I'm happy now -- Thanks so very much! Da1hammer PS. I use the calculator for sanity purposes and help with grades (of my wife) and finance, etc., so the download of Asm progs is so important, and since the wipe of the TI a few days ago, I needed so desperately to get it up and running, so that I could play around with it while I have my 'have to lay down' moments -- Thanks again! D1h. ---------------------------------------------------------------------- Comment By: da1hammer (da1hammer) Date: 2010-11-16 01:05 Message: Lionel, Thank you for your quick reply! In answer to your question, As for your requested information, I just decided to check the version using a dash capital V on the command line, and yes, it is Version 1.14, and The program activated! I am not sure what changed (I did reboot before trying to use the program), but I will now also upload what info it spit out in the In the gnome terminal 2.28.2. I uploaded as an attached file in the Attached file section below, and I shall upload again in just a bit. Thanks again, Da1hammer ---------------------------------------------------------------------- Comment By: da1hammer (da1hammer) Date: 2010-11-16 00:49 Message: Lionel, Thank you for your quick reply! As for your requested information, I uploaded as an attached file in the Attached file section below. Thanks again, Da1hammer ---------------------------------------------------------------------- Comment By: Lionel Debroux (debrouxl) Date: 2010-11-14 08:22 Message: Hello, >From the soname, I gather that you've compiled TILP II 1.14 + contemporary libraries, right ? Please paste the output of $ ldd `which tilp` :) Thanks in advance, Lionel. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=118378&aid=3108746&group_id=18378 |
