I did the steps like described here: http://www.synce.org/index.php/Windows_Mobile_2005. After this I can connect my PocketPC without problems over Bluetooth - IF THE PASSWORD IS NOT ENABLED. Also I can browse the content via Nautilus (Synce://)
Now I want to get the synchronization working. multisync --nogui ends in:
<pre>
[plugin_init:915] here
plugin_API_version
short_name
long_name
plugin_init
[sync_connect:48] ----->
[rapi_context_connect:124] failed to connect to 192.168.131.201
[synce_connect:291] Failed to initialize RAPI
[sync_connect:62] <-----
always_connected
[evo2-sync] DEBUG: start: sync_connect
[evo2-sync] INFORMATION: Loading state from file /home/aedu/.multisync/5/remotesettings
[evo2-sync] DEBUG: end: load_palm_state
[evo2-sync] DEBUG: end: sync_connect
[sync_disconnect:73] ----->
[synce_join_thread:260] synce_join_thread called when no thread is running
[sync_disconnect:79] <-----
sync_disconnect
[evo2-sync] INFORMATION: start: disconnect
With pls I can get the content of my PocketPC, while synce_pls gets the following error: "synce-pls: Unable to initialize RAPI: An unspecified failure has occurred". None the commands synce-xxx is working, all with the same or similar error.
So now my questions:
1. Why I cannot synchronize my Pocketpc? The connection is working well and I can browse the t content.
2. Does anybody know, why the synchronization with a password enabled does not work. I tried with pin and alphanumeric version of a password.
I give the password like "vdccm -p password". My password is correct, but is the same error "lcp terminated per peer" described here http://synce.sourceforge.net/synce/qa.php. Without password all works fine.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Ok I know, there are several threads about this subject, but I want to explain my problem.
OS: Ubuntu 6.10 Edgy Eft, Gnome Desktop
Mobile: HTC Hermes, WM5
I did the steps like described here: http://www.synce.org/index.php/Windows_Mobile_2005. After this I can connect my PocketPC without problems over Bluetooth - IF THE PASSWORD IS NOT ENABLED. Also I can browse the content via Nautilus (Synce://)
Now I want to get the synchronization working. multisync --nogui ends in:
<pre>
[plugin_init:915] here
plugin_API_version
short_name
long_name
plugin_init
[sync_connect:48] ----->
[rapi_context_connect:124] failed to connect to 192.168.131.201
[synce_connect:291] Failed to initialize RAPI
[sync_connect:62] <-----
always_connected
[evo2-sync] DEBUG: start: sync_connect
[evo2-sync] INFORMATION: Loading state from file /home/aedu/.multisync/5/remotesettings
[evo2-sync] DEBUG: end: load_palm_state
[evo2-sync] DEBUG: end: sync_connect
[sync_disconnect:73] ----->
[synce_join_thread:260] synce_join_thread called when no thread is running
[sync_disconnect:79] <-----
sync_disconnect
[evo2-sync] INFORMATION: start: disconnect
With pls I can get the content of my PocketPC, while synce_pls gets the following error: "synce-pls: Unable to initialize RAPI: An unspecified failure has occurred". None the commands synce-xxx is working, all with the same or similar error.
So now my questions:
1. Why I cannot synchronize my Pocketpc? The connection is working well and I can browse the t content.
2. Does anybody know, why the synchronization with a password enabled does not work. I tried with pin and alphanumeric version of a password.
I give the password like "vdccm -p password". My password is correct, but is the same error "lcp terminated per peer" described here http://synce.sourceforge.net/synce/qa.php. Without password all works fine.