spl printer driver for unix Activity
Brought to you by:
ap2c
Activity for spl printer driver for unix
-
Bob Wilkinson posted a comment on ticket #96
As further information, I was able to print from a windows laptop. The error seen above arose when I tried to print from a laptop running debian unstable.
-
I am using debian unstable . root@portugal:/usr/lib/cups/filter# dpkg --list printer-driver-splix Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-====================-==============-============-========================================================= ii printer-driver-splix 2.0.0+svn315-7 amd64 Driver for Samsung and Xerox...
-
ML-1610 used as network printer fails for remote jobs
-
ValdikSS posted a comment on discussion Open Discussion
SCX-4521F is listed as UNTESTED on the website. I can confirm that it works perfectly fine.
-
Yee Lee posted a comment on discussion Help
Good news from me again: I have also resolved the issue with my ML-1630, but not by authorizing the rastertoqpdl as Fulvio suggested. The rastertoqpdl remain as default authorizied. I also followed the guide from https://github.com/peekpt/Old-Samsung-Printer-Splix-Catalina, and it worked well except for one point: during the step of editing the file in nano, when I extended the line with the complete path of rastertoqpdl, the line was automatically saved as two lines when I pressed Ctrl+O (to write...
-
Hi Fulvio, I'm so glad to see your post. I also followed the steps in the provided link to install my ML-1630, but I encountered a similar issue. Although the printer has been added, it is unable to receive print jobs from any apps. I noticed that you mentioned encountering a security prompt and autorizing the filter rastertoqpdl. Where can I encounter this security prompt? Or should I proactively set the execution permission for the filter file rastertoqpdl myself? I'm using macOS 12.6.6 Monterey,...
-
Fulvio Rossetti posted a comment on discussion Help
Resolved! Anyone this may help: tried again following the instructions given here: https://github.com/peekpt/Old-Samsung-Printer-Splix-Catalina a "rastertoqpdl cannot be run as it is from an unauthorized developer" window popped up. From the security menu I authorized the opening of rastertoqpdl and... voilà!
-
Hello all, I can't get my (old but still great) Samsung ML-1630 printer to work on MacOS Ventura (M1). I tried and tried to use Splix following these directions: https://github.com/peekpt/Old-Samsung-Printer-Splix-Catalina but unfortunately it didn't work (the printer shows no signs of life). I tried to use the similar models file but the printer only printed a "please use the proper driver" warning. Thanks in advance for the help!
-
David Cuadrado posted a comment on discussion Open Discussion
I just compiled this from source for my Samsung ML-1710 and it works!
-
Gerald posted a comment on discussion Open Discussion
No tinkering required. Only had to install the splix rpm from the standard Fedora repositories and then selected ML-2240 in CUPS web interface configuration. Fedora release 36 on x86_64 Installed Packages Name : splix Version : 2.0.1 Release : splix-2.0.1-0.46.20130902svn.fc36.x86_64 Architecture : x86_64
-
Julian Heinzel posted a comment on discussion Open Discussion
I recently acquired an SF-760P and got it working with the SCX-3200 driver as well. If the project is still alive, I'm also willing to adjust the driver.
-
eb264 csw posted a comment on discussion Open Discussion
As splix is closer to the hardware, perhaps you can advise. Or suggest where to ask. When I turn the printer on, its lights turned on for a short while, and it turns off. lsusb doesn't see it. But by pressing two of the printers keys at the same time, I can make it enters a state which is unlimited in time, where $ lsusb Bus (some bus) Device (some device): ID 0000:0000 Samsung BOOT-DOWNLOAD and lsusb -v will identify it as of type printer. Can you tell what should I do to make it work, or where...
-
Ian posted a comment on discussion Open Discussion
It works, thanks for this wonderful software! Details: Fedora 35 on Raspberry Pi4 Linux fedora 5.16.18-200.fc35.aarch64 Installed Packages Name : splix Version : 2.0.1 Release : 0.45.20130902svn.fc35 Architecture : aarch64 Size : 221 k Source : splix-2.0.1-0.45.20130902svn.fc35.src.rpm
-
...6 years later...I had this issue and it was because on the remote Linux machine I had added the printer using the SpliX driver. This is not correct as then your print jobs will be put through the SpliX driver twice - once on your machine and then again on the print server where it will of course fail. You'll see "SpliX Cannot open job" but unfortunately not much else useful in the log to explain the problem. Instead on the remote machine add the printer through CUPs and select the 'raw' driver...
-
Fhiss posted a comment on discussion Open Discussion
Printer Xerox Phaser 3140 works with ph3140.ppd. Please change state on the page http://splix.ap2c.org/. Thanks for the project.
-
khvalera created ticket #95
ML-2015
-
GabrielLuke modified a comment on discussion Help
For 10 years, I've had my cheap color laser printer... If it's still made, I would suggest this model. Last forever, the cartridges. I'm on my second one, and I think I've paid about $10 on ebay for it. My father has a brother, and he didn't have a problem. It looks like a slightly stronger unit than my Samsung, but I don't think any of you will go wrong. Whatever you buy, make sure you get cheap dirt from the cartridges. Also, try to see with one cartridge how many prints you can get.
-
For 10 years, I've had my Samsung... If it's still made, I would suggest this model. Last forever, the cartridges. I'm on my second one, and I think I've paid about $10 on ebay for it. My father has a brother, and he didn't have a problem. It looks like a slightly stronger unit than my Samsung, but I don't think any of you will go wrong. Whatever you buy, make sure you get cheap dirt from the cartridges. Also, try to see with one cartridge how many prints you can get.
-
ido posted a comment on discussion Open Discussion
setup: Distributor ID: Raspbian Description: Raspbian GNU/Linux 10 (buster) Release: 10 Codename: buster splix version: printer-driver-splix: Installed: 2.0.0+svn315-7+b15 Candidate: 2.0.0+svn315-7+b15 Version table: *** 2.0.0+svn315-7+b15 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages 100 /var/lib/dpkg/status
-
Nathan Shearer posted a comment on discussion Open Discussion
Samsung CLP-310 2.0.0
-
Marco created ticket #9
Add Samsung ML-1860/1865 support
-
Hey Devs, can you please include this PDD for Samsung ML-1860/1865 in the splix packages? I'm not affiliated with the creator, so maybe you should leave an issue on GitHub to let him now. Anyway, this has saved my life many times. It's working perfectly and it's the only available solution for this model! I only forget sometimes, that it's not in the splix package and that I have to manually download the PPD from the link above. Best Marco
-
Hey Devs, can you please include this PPD for Samsung ML-1860/1865 in the splix packages? I'm not affiliated with the creator, so maybe you should leave an issue on GitHub to let him now. Anyway, this has saved my life many times. It's working perfectly and it's the only available solution for this model! I only forget sometimes, that it's not in the splix package and that I have to manually download the PPD from the link above. Best Marco
-
Hey Devs, can you please include this PPD for Samsung ML-1860/1865 in the splix packages? I'm not affiliated with the creator, so maybe you should leave an issue on GitHub to let him now. Anyway, this has saved my life many times. It's working perfectly and it's the only available solution for this model! I only forget sometimes, that it's not in the splix package and that I have to manually download the PPD from the link above. Best cyper
-
777 posted a comment on discussion Open Discussion
КакскачатьдрованаэтотпринтерКакскачатьдрованаэтотпринтер
-
Bartoli modified a comment on discussion Help
I'm currently running archlinux and trying to get my printer working on linux with splix. The printer does print but the left and bottom margins are too wide so the cups test page is cut off. The default papersize is set to A4, which is correct. Thanks,
-
I'm currently running archlinux and trying to get my printer working on linux. The printer does print but the left and bottom margins are too wide so the cups test page is cut off. The default papersize is set to A4, which is correct. Thanks,
-
James Brown posted a comment on discussion Open Discussion
Thanks for adding to the patches branch. If I make any further progress I'll submit via gitlab.
-
Daniil Larionov posted a comment on discussion Open Discussion
Thanks a lot for your work, but it would help a lot if you were publishing your patches as GIT forks on git(hub|lab).
-
Apologies, but on further testing I have noticed that my above patch is not perfect. It only works with A4 paper size @ 600dpi. It appears that the M2026 expects the bandwidth in bytes to be a multiple of 32 and maybe also expects it to be exactly the same as the bandwidth generated by the Samsung ULD. The following formula replicates the ULD bandwidth for A4 and Letter @ 600dpi and 1200dpi: bandWidthInB = round((pageWidth - floor(page->convertToXResolution(request.printer()->hardMarginX())))/256)*32;...
-
Added in commit 1d7229aa, thanks.
-
Applied in commit 62a25031, thanks.
-
Although it seems that Splix works fine on other members of the Samsung 202X family (see for example http://www.openprinting.org/printer/Samsung/Samsung-M2022W ), I could not get it to work with my M2026. The printer ingested paper but just passed it through without printing anything. Others seem to have had the same problem (see for example https://plus.google.com/+DavidAlanGilbert/posts/7TJtoEC84Zs ). My ppd was derived from Samsung's Samsung_M2020_Series.ppd with the following edits: FileVersion:...
-
Chaos Engine modified a comment on discussion Open Discussion
Hey, it works for me too. Other drivers (official!) are failing. Here's my PPD file: https://gist.github.com/ChaosEngine/65532a1bb837e5adaa067af7670ff2c2 Please update http://splix.sourceforge.net/ with that info. Thnak you for great peace of software :-)
-
Hey, it works for me too. Other drivers (official!) are failing. Here's my PPD file: https://gist.github.com/ChaosEngine/65532a1bb837e5adaa067af7670ff2c2 Please update http://splix.sourceforge.net/ with that info. Thnak you for great peace of software :-)
-
Fixed in commit 89c88ae, thanks
-
Pee Bee posted a comment on discussion Open Discussion
Tested CLP 315 on fresh install of Debian stretch with printer drivers included in installation options, no further configuration. CUPS system-config-printer application succesfully prints test page and configures printer settings. Toner levels are not reported. Document printed from LibreOffice printed. In all cases, margins are out: Test page border is ~6mm from left edge, ~1mm from right, ~6mm from top, ~3mm from bottom.
-
Zooey Kilpatrick modified a comment on discussion Help
I had been using Splix for a couple of years for my Samsung ML 1710 connected via My Airport Extreme. My AE died and had to connect to WIFI with my cable modem so am no longer able to use my ML 1710 wirelessly. Connected ML 1710 to my macbook via USB cable and now, suddenly, I am unable to print. Have tried to download Splix again and again but now get an error message on the install. "The Installation Failed. The Installer Encountered an Error that caused the installation to fail. Contact the software...
-
I had been using Splix for a couple of years for my Samsung ML 1710 connected via My Airport Extreme. My AE died and had connect to WIFI with my cable modem so am no longer able to use my ML 1710 wirelessly. Connected ML 1710 to my macbook via USB cable and now, suddenly, I am unable to print. Have tried to download Splix again and again but now get an error message on the install. "The Installation Failed. The Installer Encountered an Error that caused the installation to fail. Contact the software...
-
dcb posted a comment on discussion Help
fedora/pass20/20170109/splix.spec.out:src/cache.cpp:245:25: warning: '~' on an expression...
-
Piotr Sawuk created ticket #94
what printer is supported by clp310n.ppd.gz? delete this! I use clp310.ppd.gz instead!
-
Saulius posted a comment on discussion Help
Hi, I have Rarpberry Pi 2 with 4.4.11-v7+ armv7l GNU/Linux Is supported by 'armhf'...
-
Iulian Trandafir posted a comment on discussion Open Discussion
Samsung SCX-4300 works for me too, on a Wandboard Quad, WB 4.1.15 kernel, Debian...
-
Herwig Hochleitner created ticket #93
Support for Samsung ML-2510
-
Malcolm McDowell posted a comment on discussion Help
Hi, I was wondering if a document describing the QPDL (version 7??) exists? This...
-
Philip Pack posted a comment on discussion Open Discussion
First and foremost thank you. I'm very happy to report that ML-1915 is working for...
-
andres contreras weglinski posted a comment on discussion Help
Do you have any solution to use my Xerox Phaser 3117 in mac osx 10.11.2 el capit...
-
f f posted a comment on discussion Help
Hello This printer worked perfectly for years under Fedora, as a network printer...
-
Bart Vermeulen posted a comment on ticket #92
I am having the same issue printing to a Samsung ML1640 over ipp. Printing remotely...
-
Karl posted a comment on discussion Open Discussion
Hi, i tested splix on Raspberry Pi with Samsung SF-760P. I tested it with the Samsung...
-
Mark Bosch modified a comment on discussion Open Discussion
Hi there all We are busy useing the Samsung Xpress M2020W in Opensuse Linux 11.2...
-
Hi there all We are busy useing the Samsung Xpress M2020W in Opensuse Linux 11.2...
-
StrPt posted a comment on ticket #91
I know, that nobody (Arch Linux, CentOS, Debian, Fedora, Mageia) builds splix with...
-
These files are absent in ppd directory, wouldn't it make more sense to move them...
-
spl printer driver for unix released /OldFiles/splix-1.0.1-beta2.tar.bz2
-
-
-
-
-
Sheldan posted a comment on discussion Help
I've run this command it doesn't work. It just throws the error "Invalid Manufac...
-
I've installed splix and everything is working fine, except when I try to print I...
-
amosonn created ticket #92
error printing SCX4216F over ipp
-
Some PPDs are outside ppd/
-
New patch's version with Device ID for Samsung ML-2160
-
DeviceID
-
ldflags
-
gcc44
-
Fix alignment problem on armel
-
Ilya Gordeev created ticket #90
Compilation warning: dereferencing type-punned pointer
-
Martin posted a comment on discussion Open Discussion
Hi, I'm trying to use pstoqpdl with the command line as follows: ./pstoqpdl sdf sdf...
-
AlexL posted a comment on ticket #88
Please close this bug. All works fine if to use .DRV instead .PPD.
-
"SpliX Invalid PPD file version: SpliX V. 2.0.0 but the PPD file is designed for...
-
Page 1 (Scheduler not running?): {'cups_connection_failure': False} Page 2 (Is local...
-
Markus Rathgeb posted a comment on discussion Open Discussion
Samsung ML-1915 is working fine here. Package: net-print/splix Version: 2.0.0_p20111206...
-
Please help with Samsung SCX-4600. Scaner works only.
-
Igor modified a comment on discussion Open Discussion
Samsung SCX-3200 works very well on arch linux. Thank you.
-
Samsung SCX-3200 works very well on arch linux
-
James E posted a comment on discussion Open Discussion
Hello, I managed to get my Samsung M2022W working with Splix by pretening it was...
1
