social facebook login remain temp user bug

The professional way to manage your WiFi network using FreeRADIUS

Brought to you by: dvdwalt

social facebook login remain temp user bug

Forum: General Discussion

Created: 2016-09-15

Updated: 2017-08-11

chung - 2016-09-15

Hi,
When i use social login some times it works as it should and some times temp user stays logged in.
I tested on Andoid/IOS and Windows devices.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

chung - 2016-09-15

After a number time test this. I found the issue by "pop up captive portal" on IOS/Android. Because if I authenticate facebook login via web browser work like a charm.
This is the big issue cause nowaday we have a lot of mobile device access WiFi.
Hope Dirk will fix it ASAP.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Dirk van der Walt - 2016-09-15

Hi guys,

Sorry for being so absent on the forums. We''re finishing off a few things which are taking a bit longer that we anticipated.

Chung, just a quick question.

Is this problem on the Mikrotik or the CoovaChilli login pages?

Kind regards

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

chung - 2016-09-15

Hi Dirk
On CoovaChilli

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Dhuka - 2016-09-15

hi,

i have similar issue with social login and mikrotik as captive portal, i have RD on AWS and use freeradius 3.x. i have tested successfully login from login page captive portal of mikrotik and receive accept packet from radius with temp user and succes created extra field name and extra value name (SL_3_XXXXXX). But after this nothing happen , the session with new user as extra value name (SL_3_XXXXXX) not appear. Session still with temp user. So the client connection will problem with session timeout

any suggestion this issue ?

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

chung - 2016-09-15

Hi Dhuka,
I have same topology with you. RD on AWS, freeradius 3.x
The below screenshoot profile component attribution is attached to temp user

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

chung - 2016-09-15

How about you Dhuka, What is your radius attribution temp user?

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Dhuka - 2016-09-15

Hi chung,

below the screenshoot private attribute of temp user

Last edit: Dhuka 2016-09-15

Screenshot_10.png

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Dhuka - 2016-09-16

Hi Cung,

i also have RD server with radius 2.x. i tested using coovachilli captive portal and running properly. Temp user login, and redirect to Faceboo smootly. After log in fb , temp user will be disconnect and then create the new dynamic client user like sl_2_xxxxx for the new sesssion.

why this doesnt work with radius 3.x ? as we know dynamic client is changed approach since radius 3.x not using rlm_raw ? or something miss on my configuration ?

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

chung - 2016-09-16

Hi Dhuka
It's worked smoothly with pop up captive portal built in IOS/ Android devices right? Or only when open web browser?

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Dhuka - 2016-09-16

Hi chung,

yes , both of browser and android working properly. even i use default temp user dvdwalt

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

chung - 2016-09-16

Hi Dhuka,
It's great if we can live chat via Skype for purpose support together.
My skype name: chungvu87

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Antonio Omiste - 2017-07-25

Hello and sorry for reviving the thread, but is there any workaround without downgrading to radius 2.x??

Thanks in advancement.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

13th Banana - 2017-08-11

I want to know too. Thanks.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.