[Plptools-developers] [ plptools-Support Requests-2000109 ] Can not access Series 3c using plpfuse

[SourceForge.net <no...@so...>]

Support Requests item #2000109, was opened at 2008-06-22 18:08
Message generated for change (Comment added) made by rrt
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=208797&aid=2000109&group_id=8797

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Priority: 5
Private: No
Submitted By: Jonathan Rawle (jrawle)
Assigned to: Nobody/Anonymous (nobody)
Summary: Can not access Series 3c using plpfuse

Initial Comment:
I could always access my Series 3c successfully using plpnfsd. However, today I came to compile the new PLP Tools as the old one doesn't compile on my system, only to discover plpnfsd has been replaced with plpfuse. After figuring out that I needed to install fuse before compiling, I tried it out. I can view my M:, but I can't access any files - it says Input/output error.

With debug, I get:

   unique: 37, error: -5 (Input/output error), outsize: 16
unique: 38, opcode: READ (15), nodeid: 5, insize: 64
READ[0] 4096 bytes from 0
   unique: 38, error: -5 (Input/output error), outsize: 16
unique: 39, opcode: FLUSH (25), nodeid: 5, insize: 64
FLUSH[0]
   unique: 39, error: -38 (Function not implemented), outsize: 16
unique: 40, opcode: RELEASE (18), nodeid: 5, insize: 64
RELEASE[0] flags: 0x8000
   unique: 40, error: 0 (Success), outsize: 16


----------------------------------------------------------------------

>Comment By: Reuben Thomas (rrt)
Date: 2008-06-22 18:50

Message:
Logged In: YES 
user_id=50145
Originator: NO

Could you possibly discover which is the earliest version that doesn't
work? I think that would be the quickest way for me to find a likely fix;
as far as I can see there have been no non-trivial changes to the ncpd code
since 0.16, so the bug is probably in some seemingly trivial change. I
would suggest a binary search, i.e. try version 1.0.0 first, then work
backwards or forwards as necessary, roughly skipping half the versions each
time.

----------------------------------------------------------------------

Comment By: Reuben Thomas (rrt)
Date: 2008-06-22 18:40

Message:
Logged In: YES 
user_id=50145
Originator: NO

If you turn on debugging for ncpd do you get anything in the relevant
error log (for me it's /var/log/debug)? If plpftp doesn't work it suggests
the problem is not in plpfuse. I presume that plpftp at least prints a
startup message? Does it not give any error?

----------------------------------------------------------------------

Comment By: Jonathan Rawle (jrawle)
Date: 2008-06-22 18:35

Message:
Logged In: YES 
user_id=661960
Originator: YES

plpftp just does nothing. It doesn't run any ftp comments passed as
parameters or give a prompt.

----------------------------------------------------------------------

Comment By: Reuben Thomas (rrt)
Date: 2008-06-22 18:33

Message:
Logged In: YES 
user_id=50145
Originator: NO

I'm sorry plpfuse doesn't work for you. Does the latest version's plpftp
still work? It would be nice to know where the bug is. Unfortunately I
don't have an EPOC16 device to test with.

----------------------------------------------------------------------

Comment By: Jonathan Rawle (jrawle)
Date: 2008-06-22 18:21

Message:
Logged In: YES 
user_id=661960
Originator: YES

I've now tried 0.16, and that compiles on my Fedora system and
(thankfully) still uses plpnfsd. All my old scripts for connecting and
backup now work as they should!

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=208797&aid=2000109&group_id=8797