% plpprintd -d -v
started, waiting for requests.
WPRT ERR:()
plpprintd: could not connect: unit disconnected
WPRT ERR:()
plpprintd: could not connect: unit disconnected
WPRT ERR:()
Naturally the Epoc machine is connected and I selected Print via PC.
From the Ericcson the files are created but never spooled on the Linux box.
Here the description of my Epoc stuff :
General:
Machine Type: Series 5
Machine Name: Ericsson MC 218
Machine UID: 1000118ae1c20ba3
UI Language: French
ROM:
Version: 1.05(262)
Size: 8192k
Programmable: yes
Thanks for your help.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
It looks like the WPRT daemon on your MC218 either dies or does use a different Protocol than on my Psion S5. (I developed and tested it on an Psion S5).
The ROM version looks somewhat old (i have Version 1.05(319)) so it possibly could be a version mismatch only (the Print protocol exchanges Version-Information during initialization. All the versions i'm aware of use 2.0 a print protocol version. If you are capable of building the stuff yourself, you could try to change the printer version in lib/wprt.cc in the initPrinter function (the two lines have a comment about the version).
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
-
2002-08-05
It's working now, when I start it by hand. But when plpprintd is started as a daemon with init.d/psion it's not working. So the problem was not with the MC218.
I compiled the source of plpprint on my computer.
Now the big problem is to print the Postscript created by plpprint.
Here the error :
Operand stack:
200 CharStrings Rcaron -string- -string- edieresis -string- -string- o -string- -string- Zdotaccent -string- -string- odieresis -string- -string- z -string- -string- gcommaaccent -string- -string- partialdiff -string- -string- omacron -string- -string- uring -string- -string- B -string- -string- M -string- -string- Abreve -string- -string- Ntilde -string- -string- X -string- -string- Imacron -string- -string- Yacute -string- -string- c -string- -string- Racute -string- -string- ecircumflex -string- -string- n -string- -string- Zacute -string- -string- otilde -string- -string- y -string- -string- eogonek -string- -string- ohungarumlaut -string- -string- uogonek -string- -string- A -string- -string- L -string- -string- Eth -string- -string- Euro -string- -string- --dict:286/316(L)--
Execution stack:
%interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --dict:12/14(ro)(G)-- --nostringval-- 10 %dict_continue --nostringval-- --nostringval--
Dictionary stack:
--dict:929/983(ro)(G)-- --dict:0/20(G)-- --dict:114/200(L)-- --dict:3/12(L)--
Current allocation mode is local
Current file position is 6369
Aladdin Ghostscript 6.01: Unrecoverable error, exit code 1
--
Lot of thanks for your job.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Problem with plpprint :
% plpprintd -d -v
started, waiting for requests.
WPRT ERR:()
plpprintd: could not connect: unit disconnected
WPRT ERR:()
plpprintd: could not connect: unit disconnected
WPRT ERR:()
Naturally the Epoc machine is connected and I selected Print via PC.
From the Ericcson the files are created but never spooled on the Linux box.
Here the description of my Epoc stuff :
General:
Machine Type: Series 5
Machine Name: Ericsson MC 218
Machine UID: 1000118ae1c20ba3
UI Language: French
ROM:
Version: 1.05(262)
Size: 8192k
Programmable: yes
Thanks for your help.
It looks like the WPRT daemon on your MC218 either dies or does use a different Protocol than on my Psion S5. (I developed and tested it on an Psion S5).
The ROM version looks somewhat old (i have Version 1.05(319)) so it possibly could be a version mismatch only (the Print protocol exchanges Version-Information during initialization. All the versions i'm aware of use 2.0 a print protocol version. If you are capable of building the stuff yourself, you could try to change the printer version in lib/wprt.cc in the initPrinter function (the two lines have a comment about the version).
It's working now, when I start it by hand. But when plpprintd is started as a daemon with init.d/psion it's not working. So the problem was not with the MC218.
I compiled the source of plpprint on my computer.
Now the big problem is to print the Postscript created by plpprint.
Here the error :
Operand stack:
200 CharStrings Rcaron -string- -string- edieresis -string- -string- o -string- -string- Zdotaccent -string- -string- odieresis -string- -string- z -string- -string- gcommaaccent -string- -string- partialdiff -string- -string- omacron -string- -string- uring -string- -string- B -string- -string- M -string- -string- Abreve -string- -string- Ntilde -string- -string- X -string- -string- Imacron -string- -string- Yacute -string- -string- c -string- -string- Racute -string- -string- ecircumflex -string- -string- n -string- -string- Zacute -string- -string- otilde -string- -string- y -string- -string- eogonek -string- -string- ohungarumlaut -string- -string- uogonek -string- -string- A -string- -string- L -string- -string- Eth -string- -string- Euro -string- -string- --dict:286/316(L)--
Execution stack:
%interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --dict:12/14(ro)(G)-- --nostringval-- 10 %dict_continue --nostringval-- --nostringval--
Dictionary stack:
--dict:929/983(ro)(G)-- --dict:0/20(G)-- --dict:114/200(L)-- --dict:3/12(L)--
Current allocation mode is local
Current file position is 6369
Aladdin Ghostscript 6.01: Unrecoverable error, exit code 1
--
Lot of thanks for your job.
The Error: line is missing. It is printed before the Operand stack dump.
I responded by email to your sourceforge address ...
is that problem solved?
-I also ran into postscript problems. I get
Loading StandardSymL font from /usr/share/fonts/default/Type1/s050000l.pfb... 1999108 635088 1722904 413255 0 done.
Error: /invalidaccess in --def--
Operand stack:
200 CharStrings lslash -string- -string- twosuperior -string- -string- lcommaaccent -string- -string- Edotaccent -string- -string- Adieresis -string- -string- Zcaron -string- -string- o -string- -string- Eth -string- -string- z -string- -string- ogonek -string- -string- Udieresis -string- -string- scommaaccent -string- -string- Nacute -string- -string- eacute -string- -string- B -string- -string- Rcaron -string- -string- ocircumflex -string- -string- M -string- -string- hungarumlaut -string- -string- gcommaaccent -string- -string- Cacute -string- -string- X -string- -string- c -string- -string- Aogonek -string- -string- dotlessi -string- -string- lcaron -string- -string- Ecaron -string- -string- Atilde -string- -string- Scaron -string- -string- nacute -string- -string- Idieresis -string- -string- n -string- -string- Iogonek -string- -string- Ucircumflex -string- -string- y -string- -string- plusminus -string- -string- egrave -string- -string- A -string- -string- Racute -string- -string- oacute -string- -string- emacron -string- -string- L -string- -string- Euro -string- -string- --dict:274/316(L)--
Execution stack:
%interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop 1 3 %oparray_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --dict:12/14(ro)(G)-- --nostringval-- 2 %dict_continue --nostringval-- --nostringval--
Dictionary stack:
--dict:1005/1123(ro)(G)-- --dict:0/20(G)-- --dict:115/200(L)-- --dict:9/12(L)--
Current allocation mode is local
Current file position is 6369
AFPL Ghostscript 7.04: Unrecoverable error, exit code 1
any hints appreciated.
jan.
I get the exact same error... only my ghostscript version differs:
GNU Ghostscript 7.05: Unrecoverable error, exit code 1
how to solve this? Is this a bug?
I found the solution...
the bug is already solved in the CVS version of plptools.
tnx guys...