I can't run pglcmd in Debian

Help
Luk
2012-03-23
2012-11-11
  • Luk

    Luk - 2012-03-23

    When installing from the repository pgl i get this error:

    [CODE]Prekonfiguracja pakietów ...
    Selecting previously unselected package pgld.
    (Odczytywanie bazy danych ... 158506 files and directories currently installed.)
    Rozpakowanie pgld (z .../pgld_2.1.3-1_amd64.deb) ...
    Selecting previously unselected package pglcmd.
    Rozpakowanie pglcmd (z .../pglcmd_2.1.3-1_all.deb) ...
    Selecting previously unselected package pgl-gui.
    Rozpakowanie pgl-gui (z .../pgl-gui_2.1.3-1_amd64.deb) ...
    Przetwarzanie wyzwalaczy dla man-db...
    Przetwarzanie wyzwalaczy dla desktop-file-utils...
    Przetwarzanie wyzwalaczy dla gnome-menus...
    Konfigurowanie pgld (2.1.3-1) ...
    Konfigurowanie pglcmd (2.1.3-1) ...
    pgld will soon be started ...
    If any blocklists are missing, they will be downloaded. This may take several
    minutes. Please be patient and don't abort. If you want to follow the update
    process, then do in another terminal a
     tail -f /var/log/pgl/pglcmd.log
    The lists are saved to /var/spool/pgl/.
    The installation of pglcmd will fail, if starting pgld fails. So if
    downloading the blocklists fails temporarily, the installation will fail. In
    this case you may turn the automatic starting off by setting in
    /etc/pgl/pglcmd.conf:
     INIT="0"
    Then complete the installation and turn the automatic start on again:
     sudo dpkg-reconfigure --force pglcmd
    Please be patient ...
    Starting PeerGuardian Linux: pgld failed!
    invoke-rc.d: initscript pgl, action "start" failed.
    dpkg: błąd przetwarzania pglcmd (--configure):
     podproces zainstalowany skrypt post-installation zwrócił kod błędu 4
    dpkg: problemy z zależnościami uniemożliwiają skonfigurowanie pgl-gui:
     pgl-gui zależy od pglcmd (= 2.1.3-1); jednakże:
      Pakiet pglcmd nie jest jeszcze skonfigurowany.
    dpkg: błąd przetwarzania pgl-gui (--configure):
     problemy z zależnościami - pozostawiony nieskonfigurowany
    configured to not write apport reports
                                          configured to not write apport reports
                                                                                Wystąpiły błędy podczas przetwarzania:
     pglcmd
     pgl-gui
    E: Sub-process /usr/bin/dpkg returned an error code (1)
    Nie udało się zainstalować pakietu. Próba powrócenia do poprzedniego stanu:
    Konfigurowanie pglcmd (2.1.3-1) ...
    pgld will soon be started ...
    If any blocklists are missing, they will be downloaded. This may take several
    minutes. Please be patient and don't abort. If you want to follow the update
    process, then do in another terminal a
     tail -f /var/log/pgl/pglcmd.log
    The lists are saved to /var/spool/pgl/.
    The installation of pglcmd will fail, if starting pgld fails. So if
    downloading the blocklists fails temporarily, the installation will fail. In
    this case you may turn the automatic starting off by setting in
    /etc/pgl/pglcmd.conf:
     INIT="0"
    Then complete the installation and turn the automatic start on again:
     sudo dpkg-reconfigure --force pglcmd
    Please be patient ...
    Starting PeerGuardian Linux: pgld failed!
    invoke-rc.d: initscript pgl, action "start" failed.
    dpkg: błąd przetwarzania pglcmd (--configure):
     podproces zainstalowany skrypt post-installation zwrócił kod błędu 4
    dpkg: problemy z zależnościami uniemożliwiają skonfigurowanie pgl-gui:
     pgl-gui zależy od pglcmd (= 2.1.3-1); jednakże:
      Pakiet pglcmd nie jest jeszcze skonfigurowany.
    dpkg: błąd przetwarzania pgl-gui (--configure):
     problemy z zależnościami - pozostawiony nieskonfigurowany
    Wystąpiły błędy podczas przetwarzania:
     pglcmd
     pgl-gui[/code]
    when I type pgl-gui in terminal then
    [code] pgl-gui 
    ** Warning: Qt: Session management error: None of the authentication protocols specified are supported
    ** Debug: Graphical Sudo:  "" 
    ** Debug: virtual void ProcessT::run() Executing command "which kdesudo" () ... 
    ** Debug: "" 
    ** Debug: virtual void ProcessT::run() Command execution finished. 
    ** Debug: Graphical Sudo:  "" 
    ** Debug: virtual void ProcessT::run() Executing command "which kdesudo" () ... 
    ** Debug: "" 
    ** Debug: virtual void ProcessT::run() Command execution finished. 
    ** Debug: Connection to DBus was successful. 
    ** Debug: virtual void ProcessT::run() Executing command "which gksudo" () ... 
    ** Debug: virtual void ProcessT::run() Executing command "which gksudo" () ... 
    ** Debug: "/usr/bin/gksudo" 
    ** Debug: virtual void ProcessT::run() Command execution finished. 
    ** Debug: "/usr/bin/gksudo" 
    ** Debug: virtual void ProcessT::run() Command execution finished. 
    ** Debug: virtual void ProcessT::run() Executing command "which kdesu" () ... 
    ** Debug: virtual void ProcessT::run() Executing command "which kdesu" () ... 
    ** Debug: "" 
    ** Debug: virtual void ProcessT::run() Command execution finished. 
    ** Debug: "" 
    ** Debug: virtual void ProcessT::run() Command execution finished. 
    ** Debug: virtual void ProcessT::run() Executing command "which gksu" () ... 
    ** Debug: virtual void ProcessT::run() Executing command "which gksu" () ... 
    ** Debug: "/usr/bin/gksu" 
    ** Debug: virtual void ProcessT::run() Command execution finished. 
    ** Debug: "/usr/bin/gksu" 
    ** Debug: virtual void ProcessT::run() Command execution finished. 
    [/code]
    in /var/log/pgl/pglcmd.log
    [code]could not access PID file for pgld ... failed!
    2012-03-23 14:01:33 CET Begin: pglcmd restart
    Stopping pglcmd.wd.
    Deleting iptables ...
    Iptables deleted.
    Stopping pgld.
    Problematic daemon status: 4
    could not access PID file for pgld ... failed!
    2012-03-23 14:02:25 CET Begin: pglcmd stop
    Stopping pglcmd.wd.
    Deleting iptables ...
    Iptables deleted.
    Stopping pgld.
    2012-03-23 14:02:25 CET End: pglcmd stop
    2012-03-23 14:02:27 CET Begin: pglcmd start
    Problematic daemon status: 4
    could not access PID file for pgld ... failed![/code]
    How i can get pgl to work in Debian Wheezy
    
     
  • puf

    puf - 2012-03-24

    Same behaviour here, also with Debian Wheezy. This could be a problem with the
    init scripts. With a fresh install of pgl and default options, trying to start
    pgl I also get in /var/log/pgl/pglcmd.log:

    2012-03-24 11:51:52 WET Begin: pglcmd start
    Problematic daemon status: 4
    could not access PID file for pgld … failed!

    However the daemon starts manually ok, e.g.:

    /usr/sbin/pgld -s -l /var/log/pgl/pgld.log -d -p /var/run/pgld.pid -q 92 \
    -r 10 -a 20 /var/lib/pgl/master_blocklist.p2p

    Any suggestions?

     
  • jre-phoenix

    jre-phoenix - 2012-03-24

    puf456 might be right, init-functions have been a frequent cause of problems.
    Please report the output of AFTER you tried to start pgl

    dpkg -l lsb-base
    ls /var/run/pgl*
    ps aux | grep pgl
    

    Mine is

    jens@bastard:~$ dpkg -l lsb-base
    Desired=Unknown/Install/Remove/Purge/Hold
    | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
    |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
    ||/ Name                            Version                         Description
    +++-===============================-===============================-==============================================================================
    ii  lsb-base                        3.2-28.1                        Linux Standard Base 3.2 init script functionality
    jens@bastard:~$ ls /var/run/pgl*
    /var/run/pglcmd.wd.pid  /var/run/pgld.pid
    jens@bastard:~$ ps aux | grep pgl
    root      2933  0.0  0.9  43184 20364 ?        Ss   11:53   0:01 /usr/sbin/pgld -s -l /var/log/pgl/pgld.log -d -p /var/run/pgld.pid -q 92 -r 10 -a 20 /var/lib/pgl/master_blocklist.p2p
    root      2939  0.0  0.0   4448   984 ?        SN   11:53   0:00 /bin/sh /usr/sbin/pglcmd.wd
    jens      6098  0.0  0.0   7796   872 pts/1    S+   14:43   0:00 grep pgl
    

    Then you may try to use the internal LSB init-functions. Set in
    /etc/pgl/pglcmd.conf

    LSB=""
    

    I just noticed that I'm currently using the internal ones, so that may explain
    why it works for me on my Debian wheezy/sid system.

     
  • puf

    puf - 2012-03-24

    Thanks jre, that solved the problem. Looks like a LSB init problem. FYI, this
    behaviour was 1st detected on 2012-03-23 morning, with new packages from
    nightly Debian testing updates. A new lsb was in fact installed (see
    http://lists.debian.org/debian-testing-
    changes/2012/03/msg00035.html):

    On 2012-03-22 (Thursday), the following source package(s) entered testing:

    source package version previous

    lsb 3.2+Debian31 3.2-28.1

    Here's my output (after adding LSB=""):

    host:~# dpkg -l lsb-base
    Desired=Unknown/Install/Remove/Purge/Hold
    | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
    |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
    ||/ Nome Versão Descrição
    +++-===================-===================-==================================
    ====================
    ii lsb-base 3.2+Debian31 Linux Standard Base 3.2 init script functionality
    host:~# ls /var/run/pgl*
    /var/run/pgld.pid
    host:~# ps aux | grep pgl
    root 5546 0.0 0.1 39852 17580 ? Ss 15:13 0:00 /usr/sbin/pgld -s -l
    /var/log/pgl/p
    gld.log -d -p /var/run/pgld.pid -q 92 -r 10 -a 20
    /var/lib/pgl/master_blocklist.p2p
    root 9164 0.0 0.0 8288 868 pts/0 S+ 15:21 0:00 grep pgl
    host:~#

     
  • Luk

    Luk - 2012-03-24

    Thanks to the jre This also solved my problem :) my previous log:

    sudo pglcmd start
    Starting PeerGuardian Linux: pgld failed!
    luk@ubuntu:~$ dpkg -l lsb-base
    Desired=Unknown/Install/Remove/Purge/Hold
    | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
    |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
    ||/ Nazwa          Wersja         Opis
    +++-==============-==============-============================================
    ii  lsb-base       3.2+Debian31   Linux Standard Base 3.2 init script function
    luk@ubuntu:~$ ls /var/run/pgl*
    ls: nie ma dostępu do /var/run/pgl*: Nie ma takiego pliku ani katalogu
    luk@ubuntu:~$ ps aux | grep pgl
    luk       5670  0.3  0.5 277728 21868 ?        Sl   17:17   0:00 /usr/bin/pgl-gui
    luk       5773  0.0  0.0   7812   844 pts/3    S+   17:19   0:00 grep pgl
    

    And after applying the current LSB = ""

    dpkg -l lsb-base
    Desired=Unknown/Install/Remove/Purge/Hold
    | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
    |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
    ||/ Nazwa          Wersja         Opis
    +++-==============-==============-============================================
    ii  lsb-base       3.2+Debian31   Linux Standard Base 3.2 init script function
    luk@ubuntu:~$ ls /var/run/pgl*
    /var/run/pglcmd.wd.pid  /var/run/pgld.pid
    luk@ubuntu:~$ ps aux | grep pgl
    luk       5670  0.5  0.6 441632 24936 ?        Sl   17:17   0:10 /usr/bin/pgl-gui
    root      5799  0.1  1.3 500484 53748 pts/2    Sl+  17:20   0:02 gedit /etc/pgl/pglcmd.conf
    root      7365  0.0  0.6  50452 25244 ?        Ss   17:35   0:00 /usr/sbin/pgld -s -l /var/log/pgl/pgld.log -d -p /var/run/pgld.pid -q 92 -r 10 -a 20 /var/lib/pgl/master_blocklist.p2p
    root      7370  0.0  0.0   4448   920 ?        SN   17:35   0:00 /bin/sh /usr/sbin/pglcmd.wd
    luk       8325  0.0  0.0   7812   844 pts/3    S+   17:52   0:00 grep pgl
    luk@ubuntu:~$
    
     

Get latest updates about Open Source Projects, Conferences and News.

Sign up for the SourceForge newsletter:





No, thanks