[Panicsel-developers] RE: About panicsel util's output format.

[Cress, A. R <and...@in...>]

Guo Min,

I merged this into the source base (now sensor v1.6).
I did make a few adjustments also.
I'll post the results tomorrow.

Thanks,
Andy

-----Original Message-----
From: Guo, Min 
Sent: Monday, February 24, 2003 2:09 AM
To: Cress, Andrew R
Cc: 'pan...@li...'
Subject: About panicsel util's output format.


Hi, Andy

	I found some outputs of your panicsel tools are hard to understand
because there are few explanation and indicators in the outputs,
I would like to revise the output format and make it more readable, How do
you think about of it?

	Here I add the function that can list all the sensors to your
sensor.c file, and I would like to add some more function to your util and
do more contribution,
How about your opinions?


Thanks
Guo Min
----------------------------------------------------------------------------
-------------------------------------
--- sensor_bk.c	2003-02-24 19:30:42.000000000 +0800
+++ sensor.c	2003-02-24 22:20:59.000000000 +0800
@@ -51,6 +51,7 @@
 char progname[] = "sensor";
 char progver[] = "1.4";
 char fdebug = 0;
+int flist  = 0;
 char tmpstr[20];  /* temp string */
 
 /* sensor_dstatus
@@ -584,6 +585,9 @@
 	val = decodeValue(sens[0],sdr01);
 	if (sdr01->sens_base <= NUNITS) j = sdr01->sens_base;
 	else j = 0;
+	if (flist)
+		printf("Full sensor:%s nums:%02x\n",idstr,sdr01->sens_num);
+	else
 	printf("SDR Full %02x %02x %02x sensor: %02x %02x %s = %02x %s %.2f
%s\n",
 		sdr01->recid, sdr01->rectype, sdr01->reclen,
 		sdr01->sens_ownid, sdr01->sens_num, idstr,
@@ -603,6 +607,9 @@
 	/* if rc != 0, leave sens values zero */
 	i = bitnum(sens[2]);
 	if (fdebug) printf("bitnum = %d\n",i);
+	if (flist)
+		printf("Compact sensor:%s
nums:%02x\n",idstr,sdr02->sens_num);
+	else
 	printf("SDR Comp %02x %02x %02x sensor: %02x %02x %s = %02x %02x
%02x %02x %s\n",
 		sdr02->recid, sdr02->rectype, sdr02->reclen, 
 		sdr02->sens_ownid, sdr02->sens_num, idstr,
@@ -610,11 +617,14 @@
 	break;
     case 0x08:   /* Entity Association record */
 	sdr08 = (SDR08REC *)sdr;
+	if (!flist)
+	{
 	printf("SDR Asso %x %02x %02x %02x %02x %02x: ",
 		sdr08->recid, sdr08->rectype, sdr08->reclen, 
 		sdr08->contid, sdr08->continst, sdr08->flags);
 	for (i = 0; i < 8; i++) printf("%02x ",sdr08->edata[i]);
 	printf("\n");
+	}
 	break;
     case 0x11:   /* FRU record */
 	sdr11 = (SDR11REC *)sdr;
@@ -624,6 +634,9 @@
 	idstr[ilen] = 0;  /* stringify */
 	if (fdebug) printf("ilen=%d, istr0=%c, sizeof=%d, s0=%x\n",
 				ilen,idstr[0],sizeof(SDR11REC),sdr[ioff]);
+	if (flist)
+		printf("FRU sensor:%s
chan_num:%02x\n",idstr,sdr11->chan_num);
+	else
 	printf("SDR FRU  %02x %02x %02x dev: %02x %02x %02x %02x %s\n",
 		sdr11->recid, sdr11->rectype, sdr11->reclen,
 		sdr11->dev_slave_adr, sdr11->chan_num,
@@ -638,6 +651,9 @@
 	idstr[ilen] = 0;  /* stringify */
 	if (fdebug) printf("ilen=%d, istr0=%c, sizeof=%d, s0=%x\n",
 				ilen,idstr[0],sizeof(SDR12REC),sdr[ioff]);
+	if (flist)
+		printf("IPMB sensor:%s
chan_num:%02x\n",idstr,sdr12->chan_num);	
+	else
 	printf("SDR IPMB %02x %02x %02x dev: %02x %02x %02x %02x %s\n",
 		sdr12->recid, sdr12->rectype, sdr12->reclen,
 		sdr12->dev_slave_adr, sdr12->chan_num,
@@ -646,14 +662,18 @@
 	break;
     case 0x14:   /* BMC Message Channel Info record */
 	sdr14 = (SDR14REC *)sdr;
+	if(!flist){
 	printf("SDR BMsg %x %02x %02x: ",
 		sdr14->recid, sdr14->rectype, sdr14->reclen );
 	for (i = 0; i < 8; i++) printf("%02x ",sdr14->mdata[i]);
 	printf("%s %s %02x\n",decode_itype(sdr14->mint),
 		decode_itype(sdr14->eint), sdr14->rsvd);
+	}
 	break;
     case 0xc0:   /* OEM record (#343 = Intel) */
 	sdrc0 = (SDRc0REC *)sdr;
+	if(!flist)
+	{
 	mfgid = sdrc0->manuf_id[0] + (sdrc0->manuf_id[1] << 8) 
 		+ (sdrc0->manuf_id[2] << 16);
 	printf("SDR OEM  %02x %02x %02x manuf=", 
@@ -666,13 +686,16 @@
 		else printf("%c",c);
 	}
 	printf("\n");
+	}
 	break;
     default:
 	/* also saw type = 0x08 & 0x14 on STL2s */
+	if (!flist){
 	printf("SDR (type=0x%02x): ", sdr[3]);
 	for (i = 0; i < len; i++) printf("%02x ",sdr[i]);
 	printf("\n");
   }
+  }
   return;
 }
 
@@ -684,11 +707,12 @@
    uchar sdrdata[MAX_BUFFER_SIZE];
    int sz, i;
 
-   while ( (c = getopt( argc, argv,"cswx?")) != EOF )
+   while ( (c = getopt( argc, argv,"cswxl?")) != EOF )
       switch(c) {
           case 'x': fdebug = 1;      break;
+	  case 'l': flist = 1;	break;
           default:
-                printf("Usage: %s [-x]\n", progname);
+                printf("Usage: %s [-x -l]\n", progname);
                 exit(1);
       }               
 
-------------------------------------------------------------
Best Regards
Guo Min 
Intel China Software Lab
iNet: 8-752-1325
External: 86-21-52574545  Ext. 1325
Home: (86) 21 - 62088661  (Pacific Standard time + 16 hours)

The content of this email message solely contains my own personal views,
and not those of my employer.