[Panicsel-developers] RE: About test suites for panicsel

[Guo, M. <mi...@in...>]

Hi, Andrew:

	I revised some parts of the test suites according to your comments.
Below are my test suites.

Thanks
Guo Min
 <<panicsel_apptool_test.sh>>  <<panicsel_test_needreboot.sh>> 
>  -----Original Message-----
> From: 	Cress, Andrew R  
> Sent:	Thursday, December 05, 2002 11:37 PM
> To:	Guo, Min
> Cc:	'pan...@li...'
> Subject:	RE: About test suites for panicsel
> 
> Guo Min,
> 
> Here are the comments I had looking through the tests you have.
> 
> For showsel option -w, it would be good to also verify that after running
> it, the SEL entries appear in /var/log/messages as expected.
> 
> For showsel option -s, there may not be any OS Critical Stop messages,
> unless you have previously forced a panic (as with dopanic).
> 
> For pefconfig -n 9, it should not succeed, since it shouldn't permit
> overwriting one of the built-in entries at that offset.
> 
> For pefconfig -n 14, I believe that it may need to have the 12 & 13
> entries filled first.
> 
> For pefconfig -C, you may want to use something other than "public", since
> that is the default and it would be hard to tell if it set the specified
> string or the default string.
> 
> For the tmconfig basic test, you should probably use tmconfig -r to find
> out if the utility runs, without changing anything.
> 
> About tmconfig:
> On a Langley-Pr, "tmconfig" without options, should set up the TMode
> shared parameters.
> On a Langley-Tu or CoosBay, "tmconfig -s" is the mode to set up BMode
> shared parameters.
> 
> For the hwreset power cycle, I don't think that the ACPI configuration
> matters.  
> 
> Andy
> 
> 	 -----Original Message-----
> 	From: 	Guo, Min  
> 	Sent:	Wednesday, December 04, 2002 10:21 PM
> 	To:	Cress, Andrew R
> 	Cc:	pan...@li...
> 	Subject:	RE: About test suites for panicsel
> 
> 	Hi, Andrew:
> 
> 		I write some test cases to test the panicsel and its kernel
> patch. I publish them here, and could you please give me some 
> 	comments? I divide the test cases into two parts ,one is the test
> suites don't need to reboot machine, the other is the test suites
> 	need to reboot machine.
> 
> 		Because the test suites are too long, so I also send it out
> as attachment.
> 
> 	----------------------------------The test suites (don't need to
> reboot
> machine)------------------------------------------------------------------
> -------------
> 	[...]
> 
> 	showsel_test
> 	pefconfig_test
> 	tmconfig_test
> 
> 	-----------------------------The test suites need reboot
> machine-----------------------
> 
> 	[...]
> 	Best Regards
> 	Guo Min 
> 	The content of this email message solely contains my own personal
> views,
> 	and not those of my employer.
> 
> 	 << File: panicsel_apptool_test.sh >>  << File:
> panicsel_test_needreboot.sh >>