Activity for PAC Manager

  • Burak Burak posted a comment on discussion Help

    pacmanager cannot install on mint 20.3 terminal outputs are here: ~/Downloads/app$ sudo dpkg -i pac-4.5.5.7-all.deb Selecting previously unselected package pac. (Reading database ... 387923 files and directories currently installed.) Preparing to unpack pac-4.5.5.7-all.deb ... Unpacking pac (4.5.5.7) ... dpkg: dependency problems prevent configuration of pac: pac depends on libvte9; however: Package libvte9 is not installed. pac depends on libgnome2-gconf-perl; however: Package libgnome2-gconf-perl...

  • Hamster Hamster posted a comment on discussion Help

    Hi Rodrigo Costa Thanks a lot for the idea of using Asbru... I've never heard about it. It works great

  • Rodrigo Costa Rodrigo Costa posted a comment on discussion Help

    Hi All, I moved to asbru-cm.net, and after migrate my connections it worked like a charm. No -q option anymore in Spawned ssh from Expect. I just needed to adjust the Prompt expression, where connection is working as expected. Thanks a lot for the support.

  • Rodrigo Costa Rodrigo Costa posted a comment on discussion Help

    Hi Nico, I installed Asbru and migrate connections. With some minor tuning in xfreerdp parameters it worked like a charm, thanks a lot for the tip! I recommend all to move to Asbru, since apparently PAC is not upgraded anymore.

  • Rodrigo Costa Rodrigo Costa modified a comment on discussion Help

    Hi David, Sorry to insist on this topic but once I login it is shown in the connection panel: SPAWING: ssh -p 8022 -q -o "UserKnownHostsFile=/home/oem/snap/pac-vs/comon/ssh/known_hosts" -F "/home/oem/snap/pac-vs/common/ssh/config" -x -l < login > < IP > ( PID 888 ) If I open a terminal with the same parameters, just suppressing -q, all works fine. I do not see anywhere on PAC configuration, global or in the connection, a way to disable the -q, or Quiet. This is the issue I see causing I cannot work...

  • Rodrigo Costa Rodrigo Costa modified a comment on discussion Help

    Hi David, Sorry to insist on this topic but once I login it is shown in the connection panel: SPAWING: ssh -p 8022 -q -o "UserKnownHostsFile=/home/oem/snap/pac-vs/comon/ssh/known_hosts" -F "/home/oem/snap/pac-vs/common/ssh/config" -x -l < login> < IP> (PID 888) If I open a terminal with the same parameters, just suppressing -q, all works fine. I do not see anywhere on PAC configuration, global or in the connection, a way to disable the -q, or Quiet. This is the issue I see causing I cannot work with...

  • Rodrigo Costa Rodrigo Costa modified a comment on discussion Help

    Hi David, Sorry to insist on this topic but once I login it is shown in the connection panel: SPAWING: ssh -p 8022 -q -o "UserKnownHostsFile=/home/oem/snap/pac-vs/comon/ssh/known_hosts" -F "/home/oem/snap/pac-vs/common/ssh/config" -x -l <login> <ip> (PID 888)</ip></login> If I open a terminal with the same parameters, just suppressing -q, all works fine. I do not see anywhere on PAC configuration, global or in the connection, a way to disable the -q, or Quiet. This is the issue I see causing I cannot...

  • Rodrigo Costa Rodrigo Costa posted a comment on discussion Help

    Hi David, Sorry to insist on this topic but once I login it is shown in the connection panel: SPAWING: ssh -p 8022 -q -o "UserKnownHostsFile=/home/oem/snap/pac-vs/comon/ssh/known_hosts" -F "/home/oem/snap/pac-vs/common/ssh/config" -x -l <login> <ip> (PID 888)</ip></login> If I opne a terminal with the same parameters, just suppressing -q, all works fine. I do not see anywhere on PAC configuration, global or in the connection, a way to disable the -q, or Quiet.

  • Nico Aymet Nico Aymet modified a comment on discussion Help

    Give a try to asbru-cm.net, PAC Manager is no more updated.

  • Nico Aymet Nico Aymet posted a comment on discussion Help

    Give a try to asbru-cm.net, PAC MAnager is no more updated.

  • David Torrejón David Torrejón posted a comment on discussion Help

    Hi! No, the SSH command is not launched with "-q" option. If you want to see wha'ts going under the hood, enable the "Preferences"->"Terminal Options"->"Advanced"->"Expect DEBUG" checkbox, and see the whole connection chain in the terminal while trying to connect. BR! - David TV. On Fri, May 13, 2022 at 7:50 PM Rodrigo Costa rlvcosta@users.sourceforge.net wrote: I figure out the ssh uses -q quiet mode which is causing the issue I see on this customized prompt menu option. Anyone know if there is...

  • Rodrigo Costa Rodrigo Costa posted a comment on discussion Help

    I figure out the ssh uses -q quiet mode which is causing the issue I see on this customized prompt menu option. Anyone know if there is a way to disable -q in ssh call in PAC connection?

  • Rodrigo Costa Rodrigo Costa posted a comment on discussion Help

    I have no clue how to better describe this issue. But on PAC preferences we can define the Terminal binary to be used, which natively is xterm. This make sense since normally this will be available on all systems. But some odd condition I cannot be sure why happens. I am on a Linux Mint 18 where natively mate-terminal is used. Even using xterm if a login over ssh to a "proxy" system , it presents some warning messages and then open a native menu to select which system to login. If I open a terminal...

  • Rodrigo Costa Rodrigo Costa posted a comment on discussion Help

    When trying to create a RDP connection isung xfreerdp it fails with message: No 'xfreerdp' binary found. To use this option, please, install: 'freerdp-x11' Although rdesktop can be installed on my system it does not work as expected. On command line I can call xfreerdp and make it work properly, but I cannot use it on PAC. xfreerdp binary is installed properly and functional. Any recommendation to verify this issue?

  • jrussell88 jrussell88 posted a comment on ticket #308

    Neither of these solutions got pac-vs working for me under Ubuntu 20.04.02 LTS, so I installed the forked version of Pac Manager, asbru-cm which worked without any further issues.

  • Vincent GROSDOY Vincent GROSDOY posted a comment on discussion Help

    It was the initial value (I changed it only to try) I have the same error with 700 Regards

  • David Torrejón David Torrejón posted a comment on discussion Help

    Try: chmod -R 700 $HOME/.ssh From: Vincent GROSDOY vgrosdoy@users.sourceforge.net Sent: Friday, April 10, 2020 9:37:01 AM To: [pacmanager:discussion] 1076055@discussion.pacmanager.p.re.sourceforge.net Subject: [pacmanager:discussion] Unable to access .ssh Hello all I just install PAC 4.5.5.8 and it work fine. I would like to use my id_rsa to connect to a server, but PAC give me an error as my .ssh directory is not accessible I change mod to 777 for my /home/<user>/.ssh (recursively), but still have...

  • Vincent GROSDOY Vincent GROSDOY posted a comment on discussion Help

    Hello all I just install PAC 4.5.5.8 and it work fine. I would like to use my id_rsa to connect to a server, but PAC give me an error as my .ssh directory is not accessible I change mod to 777 for my /home/<user>/.ssh (recursively), but still have the same error.</user> drwxrwxrwx 2 myuser mygroup 4096 avril 9 21:34 .ssh/ Could someone help me to fix that issue, please ? Thank in advance. Regards VGR

  • Rodrigo Costa Rodrigo Costa posted a comment on discussion Help

    Hello David, Looks like there are some old threads about support of xfreerdp under PAC but I could not find any final information. Only xfreerdp can support newest Windows auth methods, being the only way to manage RDP connectons. But all the time I try to modify connection I have the following error from PAC: No 'xfreerdp' binary found. To use this option, please, install: 'freerdp-x11' But looking for the freerdp package it is installed and binaries are in the correct default paths. /. /usr /usr/bin...

  • Rodrigo Costa Rodrigo Costa posted a comment on discussion Help

    Hi David, Sorry my later reply. That post login question acceptance happens more than once and then I cannot use that specific string just as post login in this case. On my system there is some "issue" prelogin message where if I put a blank, or empty, prompt it matches in the prelogin never entering even in initial login rule match. PAC things it is already in the prompt, aboring any furhter expect. Then I needed to create some trick using prompt as colon sign (:) and then in the post login Expect...

  • David Torrejón David Torrejón posted a comment on discussion Help

    Hi! I'm sorry to say that you'll have to modify the "PAC Global Preferences", but in the end, it's not so hard nor messy ;) Simply change the "Press any key to continue" (at "PAC Preferences" -> "PAC Main Options" -> "Advanced") RegExp from: .(any key to continue|tecla para continuar). to: .(any key to continue|tecla para continuar|message of the day|default = vi). That is because PAC won't execute anything on the "Expect" configuration until it believes that the whole login procedure has been done....

  • Rodrigo Costa Rodrigo Costa posted a comment on discussion Help

    Hello David and others, I'm having issues to setup a post login regex to just press enter a couple of times after login to accept login scripts in some system question like accept MOTD as well define default editor, by default vi. I already enable PAC Expect debug, which gave me directions for the no match root cause, but I could not be sure if this is a function not possible or some missing configuration in my PAC environment. The idea is to just search for : regexp, when matching in expect just...

  • Maverick Maverick posted a comment on ticket #169

    Was this forgotten or no way to fix?

  • Robert P Robert P posted a comment on ticket #313

    I have similar issue with Mint 19.3, Cinnamon :~$ perl -d /usr/bin/pac Loading DB routines from perl5db.pl version 1.51 Editor support available. Enter h or 'h h' for help, or 'man perldebug' for more help. main::(/usr/bin/pac:22): $|++; DB<1> c PAC started (pac) with PID 29599 ERROR: PAC was unable to load *any* config file from '/home/dlvlprp/.config/pac'... Now starting from scratch...Use of uninitialized value in string eq at /opt/pac/lib/PACConfig.pm line 672. at /opt/pac/lib/PACConfig.pm line...

  • thijs van severen thijs van severen posted a comment on ticket #293

    gave up on this but then i found Asbru (fork of PAC that is still maintained) and this solved my problems. I was able to import my PAC connections without any issues :-) https://www.asbru-cm.net/

  • thijs van severen thijs van severen posted a comment on ticket #177

    gave up on this but then i found Asbru (fork of PAC that is still maintained) and this solved my problems. I was able to import my PAC connections without any issues :-) https://www.asbru-cm.net/

  • myname myname posted a comment on discussion Help

    could you paste here the modified lines?

  • David Torrejón David Torrejón posted a comment on discussion Open Discussion

    Hi! That's a problem with the "command prompt" not matching anything. Please, send me a screenshot of the terminal, onces everything has shown up, or eve better, when it has "timed out", in order to see the pattern that should match PAC to decide that the connection has been correctly done. David. On Fri, Jul 19, 2019 at 9:43 PM Leonard Burns IV leonard4@users.sourceforge.net wrote: I'm able to open a term and connect with "cu -l /dev/ttyUSB0" and I connect fine. I see output from my console. When...

  • Leonard Burns IV Leonard Burns IV posted a comment on discussion Open Discussion

    I'm able to open a term and connect with "cu -l /dev/ttyUSB0" and I connect fine. I see output from my console. When I create a new connection in PAC and set it to "Serial (cu)" and put the params into the cu parameter page nothing works when I try to connect, the page greys out and it just times out forever. I did find another post saying to put that line into your Phone/Dir parameter so I tried that, same thing. It just looks like its timing out. Anyone have any idea on why its locking up when...

  • Giso Kegel Giso Kegel posted a comment on discussion Help

    Hi Magnus, thx for that tip asbru-cm works for me.

  • Magnus Eriksson Magnus Eriksson posted a comment on discussion Help

    pac is not maintained anymore. Try using Asbru Connection manager, which is a maintained fork: https://github.com/asbru-cm/asbru-cm https://www.asbru-cm.net/

  • Giso Kegel Giso Kegel posted a comment on discussion Help

    Hi i have the same problem on two installations also in Ubuntu 18.04 Did someone found a solution? kernel: [13025.690829] perl[8651]: segfault at 38 ip 00007fc5106a0ac8 sp 00007ffd9610aab0 error 4 in ld-2.27.so[7fc510694000+27000]

  • dgessel dgessel posted a comment on ticket #312

    This worked. https://sourceforge.net/p/pacmanager/bugs/293/#06b8 I had to do the second step (dh-make-perl --cpan Gnome2::Vte --build) as root (e.g #sudo su). it seems to fail under sudo.

  • dgessel dgessel posted a comment on ticket #312

    perl -d:Trace /usr/bin/pac >trace 2>&1 Segmentation fault (core dumped) ` /opt/pac/lib/PACScripts.pm:1334: $$self{_PREVENT_UPDATES} = 0; /opt/pac/lib/PACScripts.pm:1336: return 1; /opt/pac/lib/PACScripts.pm:321: bless( $self, $class ); /opt/pac/lib/PACScripts.pm:322: return $self; /opt/pac/lib/PACMain.pm:878: $FUNCS{_STATS} = $$self{_GUI}{statistics}; /opt/pac/lib/PACMain.pm:880: $FUNCS{_METHODS} = $$self{_METHODS}; /opt/pac/lib/PACMain.pm:881: $FUNCS{_MAIN} = $self; /opt/pac/lib/PACMain.pm:884:...

  • dgessel dgessel posted a comment on ticket #313

    I apologize, I craeated #312 on 3-27 and totally forgot. This is the same issue. I've added the detail above to #312 and this ticket can be closed/marked as duplicate.

  • dgessel dgessel posted a comment on ticket #312

    Linux Mint 19.1, 4.15.0-46. perl5 (revision 5 version 26 subversion 1) Just updated from 18.3, PAC was running pervfectly. On 19.1, it is not, alas. :( $ perl -d /usr/bin/pac Loading DB routines from perl5db.pl version 1.51 Editor support available. Enter h or 'h h' for help, or 'man perldebug' for more help. main::(/usr/bin/pac:22): $|++; DB<1> c PAC started (pac) with PID 17508 LOG **: Name com.canonical.AppMenu.Registrar does not exist on the session bus at /opt/pac/lib/PACUtils.pm line 276. PACUtils::_splash(1,...

  • dgessel dgessel created ticket #313

    PAC isn't running on Linux Mint 19.1/XFCE

  • dgessel dgessel created ticket #312

    crash between "building GUI" and launch

  • Maurizio D Aniello Maurizio D Aniello posted a comment on discussion Open Discussion

    that empty line is not selected on Plasma kde (ex "Exit") For that I add it The "exit" line is now selected

  • AlexB AlexB posted a comment on discussion Open Discussion

    Thanks, the $TRAYICON fixes the broken icon. But i don't follow the Line 129 append. It just adds a blank "line" for tray-click which does nothing. I don't see it necessary and it works even w/o that.

  • AlexB AlexB created ticket #311

    Can't open kdbx KeePassXC Database file

  • Maurizio D Aniello Maurizio D Aniello posted a comment on discussion Open Discussion

    Anoter modify allegate. new info new note for info bug trayicon plasma5

  • Maurizio D Aniello Maurizio D Aniello posted a comment on discussion Open Discussion

    Anoter modify allegate. new info new note for info bug trayicon plasma5

  • Maurizio D Aniello Maurizio D Aniello posted a comment on discussion Open Discussion

    Error Icontray for use KDE Plasma:"Not image trayicon"Resolve: File PACTrayUnity.pm , modify Line 65 $TRAYICON = $$self{_MAIN}{_CFG}{'defaults'}{'use bw icon'} ? 'pac_tray_bw' : $TRAYICON; And Append line 129 push( @m, { label => '' } );### Good job, we feel goodbye

  • Albert Yang Albert Yang created ticket #310

    issue with RDP numberlock

  • Maurizio D Aniello Maurizio D Aniello posted a comment on discussion Open Discussion

    Please addition my code for future upgrade code is into filePACMain.pmLine 3238 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++PACROOTDESCRIPTION } else { $$self{_GUI}{descBuffer} -> set_text( encode( 'unicode', $$self{_CFG}{'environments'}{$uuid}{'description'} // '' ) ); if (! $$self{_CFG}{'environments'}{$uuid}{'title'} eq ''){ $$self{_GUI}{descBuffer} -> set_text( encode( 'unicode', "\r Is: "."\r\r\t Title: " . $$self{_CFG}{'environments'}{$uuid}{'title'}....

  • Leodan Rodriguez Diaz Leodan Rodriguez Diaz posted a comment on ticket #299

    The procedure worked for me to.. thaks i use Debian 9.6 + cinnamon

  • Nikola Kotur Nikola Kotur created ticket #309

    SSH Agent forwarding stopped working in 4.5.5.7

  • Juan Fernando Márquez G. Juan Fernando Márquez G. modified a comment on ticket #308

    I had the same problem, i could't connect to ssh server, Ubuntu 18.04, PAC-VS v4.5.5.8. I solved it, adding to /home/youruser/snap/pac-vs/common/ssh/config the following lines: Host <host_you_are_trying_to_connect> HostkeyAlgorithms +ssh-dss</host_you_are_trying_to_connect>

  • Juan Fernando Márquez G. Juan Fernando Márquez G. posted a comment on ticket #308

    I had the same problem, i could't connect to ssh server, Ubuntu 18.04, PAC-VS v4.5.5.8. I solved it, adding to /home/youruser/snap/pac-vs/common/ssh/config the following lines: Host <hostyouaretryingtoconnect></hostyouaretryingtoconnect> HostkeyAlgorithms +ssh-dss

  • Dan Dan posted a comment on discussion Help

    I too get the same error in Ubuntu 18.04

  • Martin Karari Maina Martin Karari Maina posted a comment on discussion Open Discussion

    After installing PAC in fedora 29 64 bit, I had to rename as below for it to work: mv /usr/local/lib64/perl5/ /usr/local/lib64/perl5_old I got this insight from some other link here

  • WILLIAM DE SOUZA WILLIAM DE SOUZA posted a comment on discussion Help

    up

  • Maayan Maximov Maayan Maximov posted a comment on discussion Help

    Hi everybody! I would realy like you to help me- We created some buttons by pac for remote commands, but some of them are too small for their text... How can I make them bigger? And one more question- how should I make the place of the buutons bigger (in order to have more buttons)? Thank you! Maayan

  • gurr gurr posted a comment on discussion Help

    Hi! I can start Pac manager "pac-4.5.5.7-all.deb" Using Elementory OS. But when i try to connect a session it Freezes. And i can see this error: Can't locate object method "new" via package "Gnome2::Vte::Terminal" (perhaps you forgot to load "Gnome2::Vte::Terminal"?) at /opt/pac/lib/PACTerminal.pm line 500. ignoring at /opt/pac/lib/PACMain.pm line 363. Please help!

  • Fernando Monjes Fernando Monjes posted a comment on discussion Open Discussion

    please, as I can make a local connection in pac-manager I could not, I click on local shell, but it makes a connection apparently without the environment variables, because I do not have permission to do anything and I'm using root

  • Jerzy Tryjarski Jerzy Tryjarski posted a comment on discussion Help

    Hello. I've installed Pac Manager 4.5.5.7 on Debian 9.5. I created new connection. And I try to connect to remote host ( using ssh) and I cannot. Can somebody help me ? Jerzy

  • tinex tinex posted a comment on discussion Open Discussion

    Hi there, is there a way to import from csv into Pac manager ? I tryed to manually modify the yml file and it works, but i have 1000 nd more host to import. Thanks

  • Francisco Jorge Francisco Jorge posted a comment on discussion Help

    Hi. Is there already a PAC-manager release that works under Bash on Widows? Thanks.

  • mspatrik mspatrik posted a comment on discussion Help

    hi, please tell me how to remove weird backspace character in my ssh saved logs. The backspace key keep record in auto saved logs files. the only way to get rid this backspace key in auto saved logs is do click manual "Save session logs" and then remove escape sequence every single time. i really almost got frustate to find the option auto remove esc sequence. i've tried putty it same, the backspace key still record in saved log. in Remmina, the backspace key doesn't appear and there is no weird...

  • Pete Pete posted a comment on ticket #305

    I am only a user not developer I offered this advice as a work around. On Mon, 17 Sep 2018 at 21:33, Marcio Merlone mmerlone@users.sourceforge.net wrote: Sorry, this is a workaround. Any real solution? I dont run snap. [bugs:#305] https://sourceforge.net/p/pacmanager/bugs/305/ Fail with installation in Ubuntu 18.04* Status: open Group: v1.0 (example) Created: Mon May 21, 2018 06:22 AM UTC by Juan Last Updated: Wed Jun 06, 2018 03:06 AM UTC Owner: nobody Hello, I installed the application in a new...

  • Marcio Merlone Marcio Merlone posted a comment on ticket #305

    Sorry, this is a workaround. Any real solution? I dont run snap.

  • Oscar Oscar posted a comment on discussion Help

    I have errors in Ubuntu 18.04 (64bit) too pac[17202]: segfault at 38 ip 00007fbb00594ac8 sp 00007ffc331c6920 error 4 in ld-2.27.so[7fbb00588000+27000]

  • David Torrejón Vaquerizas David Torrejón Vaquerizas posted a comment on discussion Open Discussion

    Hi, Risa. In fact, PAC is no longer being maintained for lots of reasons (mainly the spare-time I just don't have :( ) Anyway, I don't discard doing some release to definitely finish with the "Vte.so" library. Really, thanks a lot for your support, it's really appreciated!! - David

  • Risa Risa posted a comment on discussion Open Discussion

    Hi David, quick question... is PAC Manager dead or do you plan to continue with development? Please do :) regards Risa

  • Viet Nghia Nguyen Viet Nghia Nguyen posted a comment on ticket #308

    My pac-vs default private key localtion is my home directory, which is normal. There was an update for some perl libraries, and after that my pac can't connect to any ssh server. My perl version is now 5.26. When I run pac-vs from terminal: nghianv@Acer-Nitro:~$ pac-vs PAC started (pac) with PID 16414 INFO: Used config file '/home/nghianv/snap/pac-vs/common/.config/pac/pac.nfreeze' (pac:16414): GLib-GIO-WARNING **: Error creating IO channel for /proc/mounts: Permission denied (g-file-error-quark,...

  • Abhishek Abhishek posted a comment on ticket #308

    try changing the private key location in connection option In my case pac was using private key present at snap/pac-vs/common/ssh location Let me know if you find any alternate solution

  • majordanger majordanger posted a comment on ticket #235

    So 3 days ago, I had no experience with Perl whatsoever. However, after some thorough reading, I was able to fix the above error (by including the ../lib/ex/ directory), but unfortunately the ./pac_from_mcm script was written several years back (when PAC was at version 2.2 or something like that). I have therefore changed the script a little bit so that it would work with the newest PAC release (4.5.5). Using the modified scrit, I was able to import around 140 connections and 20 groups from a CSV...

  • majordanger majordanger posted a comment on ticket #235

    I will also attach the rubt script that generates a compatible CSV file from an mRemote exported confCons.xml I do not know if this is acceptable here as some may consider this an exploit (because of decrypting the passwords in mRemote), but I will attach the script anyway and will leave it up to the board moderators to decide on deleting it or not. Thank you again for this wonderful tool, and I hope my small contribution will be of use to someone in the future.

  • zodimo zodimo posted a comment on ticket #264

    http://www.blindinganswers.com/blog/how-to-install-pac-manager-in-linux-mint-19/

  • Jozef Jozef posted a comment on discussion Help

    Hello guys, I need your help. How can I migrate a database from PAC manager to Putty connection manager ? Is there some YAML to Putty database converter or ? I have my PAC manager installed on Ubuntu 14.04 but my primary system is Win 7 with Pytty manager. Thank you very much. Have a nice day

  • DF DF posted a comment on discussion Help

    thanks for posting this. This method worked and a fresh Debian 9 Stretch install

  • Alvaro Alvaro posted a comment on discussion Help

    Hi, I'm currently searching for an option to save some commands exectued from my local machine, but stored and launched as a remote connection. For example, I'm working with docker right now, I want to store a "connection" to launch a expecific docker command from my localhost, instead a remote host. A little workaround I've found is create a connection to localhost, and type my current username and password, but I think that isn't the most elegant way to do that... So can I createa a new connection...

  • Viet Nghia Nguyen Viet Nghia Nguyen created ticket #308

    Can't connect to ssh server, Ubuntu 18.04, PAC-VS v4.5.5.8

  • Hamster Hamster posted a comment on ticket #307

    Yes. Asbru solves my problem. Thankyou Vlad!! ))))

  • Alexey Hamstr Alexey Hamstr posted a comment on ticket #307

    Hello ))) I've got the same problem ((( just upgraded my Mint 17 to 19 [34988.731936] pac[544]: segfault at 38 ip 00007fece8ba6ac8 sp 00007ffe3cbfb020 error 4 in ld-2.27.so[7fece8b9a000+27000]

  • Vlad Vlad modified a comment on ticket #307

    I have the same problem. I solved it this way: first set this dependency libgnome2-vte-perl_0.11-1_amd64.deb Then install Ásbrú Connection Manager- this is a clone of PAC Manager

  • Greg Greg posted a comment on ticket #307

    Thanks. That did the trick. Even picks up the settings from PAC :)

  • Vlad Vlad posted a comment on ticket #307

    I have the same problem. I solved it this way: first set this dependency libgnome2-vte-perl_0.11-1_amd64.deb Then install Ásbrú Connection Manager- this is a clone of PAC Manager

  • Greg Greg created ticket #307

    Segfault on Linux Mint 19

  • NTBlade NTBlade posted a comment on ticket #299

    Thanks, banuj this helped me with Mint 19

  • soportedavidfigueroa@gmail.com soportedavidfigueroa@gmail.com posted a comment on discussion Help

    Hi, Install pac manager in Ubuntu 18.04 and do not raise. I get this message (pac:5272): Unique-DBus-WARNING **: 12:19:21.003: Unable to connect to the running instance, aborting. PAC not starting. PAC already running?

  • Nilber Costa Nilber Costa posted a comment on discussion Help

    I installed the pac manager by snap. But I can't connect using sudo. I already add my user in the sudoers group. When I try connect the error is: "sh: 1: sudo: Permission denied"

  • John Baluche John Baluche posted a comment on discussion Help

    Hi Cristiano, can you explain how you were able to make it work? I also need a password to connect to the jump_off_box

  • banuj banuj modified a comment on ticket #299

    For Ubuntu 18.04 you can install the deb for vte from here: libgnome2-vte-perl Another solution is to add asbru-cm repository and install package from it: curl -s https://packagecloud.io/install/repositories/asbru-cm/asbru-cm/script.deb.sh | sudo bash sudo apt install libgnome2-vte-perl

  • banuj banuj posted a comment on ticket #299

    For Ubuntu 18.04 you can install the deb for vte from here: libgnome2-vte-perl Another solution is to add asbru-cm repository and install package from it: curl -s https://packagecloud.io/install/repositories/asbru-cm/asbru-cm/script.deb.sh | sudo bash apt install libgnome2-vte-perl

  • Lucas Hamie Lucas Hamie modified a comment on discussion Help

    Hi. I'm currently experiencing the same problem. Version 4.5.5.8, ubuntu 18.04 I believe it happened after configuring some Clusters. Installed via Ubuntu Software Center Here are the logs: PAC started (pac) with PID 30350 INFO: Used config file '/home/lucas/snap/pac-vs/common/.config/pac/pac.nfreeze' (pac:30350): GLib-GIO-WARNING **: Error creating IO channel for /proc/mounts: Permission denied (g-file-error-quark, 2) INFO: Using 'Unity' tray icon Use of uninitialized value in numeric eq (==) at...

  • Lucas Hamie Lucas Hamie modified a comment on discussion Help

    Hi. I'm currently experiencing the same problem. I believe it happened after configuring some Clusters. Installed via Ubuntu Software Center Here are the logs: Use of uninitialized value in numeric eq (==) at /snap/pac-vs/1/opt/pac/lib/PACEdit.pm line 628. Use of uninitialized value in numeric eq (==) at /snap/pac-vs/1/opt/pac/lib/PACEdit.pm line 629. Use of uninitialized value in numeric eq (==) at /snap/pac-vs/1/opt/pac/lib/PACEdit.pm line 630. Use of uninitialized value in subroutine entry at...

  • Lucas Hamie Lucas Hamie modified a comment on discussion Help

    Hi. I'm currently experiencing the same problem. I believe it happened after configuring some Clusters Here are the logs: Use of uninitialized value in numeric eq (==) at /snap/pac-vs/1/opt/pac/lib/PACEdit.pm line 628. Use of uninitialized value in numeric eq (==) at /snap/pac-vs/1/opt/pac/lib/PACEdit.pm line 629. Use of uninitialized value in numeric eq (==) at /snap/pac-vs/1/opt/pac/lib/PACEdit.pm line 630. Use of uninitialized value in subroutine entry at /snap/pac-vs/1/opt/pac/lib/PACEdit.pm...

  • Lucas Hamie Lucas Hamie posted a comment on discussion Help

    Hi. I'm currently experiencing the same problem. I believe it happened after configuring some Clusters

  • Juan Juan posted a comment on ticket #305

    It works but the theme of the application doesn't work fine. Thanks!

  • Andrea Colombo Andrea Colombo created ticket #306

    Retrieve actual login password

  • Andrea Colombo Andrea Colombo posted a comment on ticket #304

    To solve temporarily, https://sourceforge.net/p/pacmanager/bugs/299/ To use Konsole (KDE), only the author can answer you. Sorry.

  • Andrea Colombo Andrea Colombo posted a comment on ticket #302

    https://sourceforge.net/p/pacmanager/bugs/299/

  • Pete Pete posted a comment on ticket #305

    Install it as a snap app much easier you need to be running snapd which is default in 18.04. sudo snap install pac-vs

  • Magnus Eriksson Magnus Eriksson posted a comment on discussion Help

    Hi, Not sure why you get this problem, but have you tried enabling "Expect DEBUG" in the Terminal Options->Advanced ? Maybe that can get you further. good luck Also, for a maintained version of Pac Manager try the Ásbrú fork at https://github.com/asbru-cm/asbru-cm

  • Gigi Duru Gigi Duru posted a comment on discussion Help

    Hello all, I'm trying to make a script to pass commands to a an open console session to a router, but i'm unable to match the prompt with "expect" my $enable_prompt = 'R9#'; $TERMINAL{send} ( "enable\n" ); $TERMINAL{expect}( "$enable_prompt", 2 ) or $TERMINAL{msg}( "Error: $TERMINAL{error}" ); What i get in the terminal is: ~~~ R9#enable R9#[pacconn(21579)][R9][R9]: Error: Timeout (2 seconds) waiting for pattern 'R9#' ~~~* For me it seems the pattern is identical to the prompt, however, i get a timeout....

  • Juan Juan created ticket #305

    Fail with installation in Ubuntu 18.04

  • Giuseppe Cruciani Giuseppe Cruciani posted a comment on ticket #288

    Thank You, this fixed a "Segmentation fault (core dumped)" after a Ubuntu upgrade from xenial to artful, better than putting an internet precompiled vte.so suggested on other bugs articles.

  • Emiliano Emiliano created ticket #304

    pac-manager on kde

1 >