Flash ECP5 via JTAG: Error: tdo check error at line 28

[Cedric de W. <ced...@ec...>]

I have used this [1] guide to generate a .svf file. I'm trying to flash 
it to my FPGA board using an Altera USB Blaster [2], But I get this 
error at the end:

  95%  SIR	8	TDI  (3C);
  95%  			MASK (00002100);
Error: tdo check error at line 28
Error:     READ = 0x0201f10
Error:     WANT = 0x0000000
Error:     MASK = 0x000b000
Time used: 0m1s756ms
svf file programmed failed

The configuration files:
$ cat myopenocd.cfg
adapter driver usb_blaster
jtag newtap auto0 tap -irlen 8 -expected-id 0x41111043

$ cat colorlight_5a_75e.cfg
init
scan_chain
svf -progress colorlight_5a_75e.svf
shutdown

The console output:
$ openocd -f ./myopenocd.cfg -f ./colorlight_5a_75e.cfg
Open On-Chip Debugger 0.11.0
Licensed under GNU GPL v2
For bug reports, read
openocd.org/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
Info : No lowlevel driver configured, using ftdi
Info : usb blaster interface using libftdi
Info : This adapter doesn't support configurable speed
Info : JTAG tap: auto0.tap tap/device found: 0x41111043 (mfg: 0x021 
(Lattice Semi.), part: 0x1111, ver: 0x4)
Warn : gdb services need one or more targets defined
svf processing file: "colorlight_5a_75e.svf"
0% HDR 0;
0% HIR 0;
0% TDR 0;
0% TIR 0;
0% ENDDR DRPAUSE;
0% ENDIR IRPAUSE;
0% STATE IDLE;
0% SIR 8 TDI (E0);
0% MASK (FFFFFFFF);
0% SIR 8 TDI (1C);
0% FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
0% SIR 8 TDI (C6);
0% SDR 8 TDI (00);
0% RUNTEST IDLE 2 TCK 1.00E-02 SEC;
0% SIR 8 TDI (0E);
0% SDR 8 TDI (01);
0% RUNTEST IDLE 2 TCK 1.00E-02 SEC;
0% SIR 8 TDI (3C);
0% MASK (0000B000);
0% SIR 8 TDI (46);
0% SDR 8 TDI (01);
0% RUNTEST IDLE 2 TCK 1.00E-02 SEC;
0% SIR 8 TDI (7A);
0% RUNTEST IDLE 2 TCK 1.00E-02 SEC;
0% 
0000DCFFFFFFFFCDBDFFFFFF006CAC4C82E24282C26CB462AC4CB4AAACA26232045C2E4E860A00FF);
0% 
0000000000FF173300000000000000000000FF173300000000000000000000FF1733000000000000);
0% 
0000FF173300000000000000000000FF173300000000000000000000FF1733000000000000000000);
<snip>
95% 
00000000000000000000000000000000000000000000000000000000000000000000000000000000);
95% 
00000000000000000000000000000000000000000000000000000000000000000000000000000000);
95% SIR 8 TDI (FF);
95% RUNTEST IDLE 100 TCK 1.00E-02 SEC;
95% SIR 8 TDI (C0);
95% RUNTEST IDLE 2 TCK 1.00E-03 SEC;
95% MASK (FFFFFFFF);
95% SIR 8 TDI (26);
95% RUNTEST IDLE 2 TCK 2.00E-01 SEC;
95% SIR 8 TDI (FF);
95% RUNTEST IDLE 2 TCK 1.00E-03 SEC;
95% SIR 8 TDI (3C);
95% MASK (00002100);
Error: tdo check error at line 28
Error: READ = 0x0201f10
Error: WANT = 0x0000000
Error: MASK = 0x000b000
Time used: 0m1s761ms
svf file programmed failed


[1] 
https://forum.linuxcnc.org/27-driver-boards/46923-my-notes-on-compiling-litex-cnc-on-linuxcnc?start=20#254029
[2] 
https://forum.linuxcnc.org/27-driver-boards/47028-my-notes-flashing-litex-cnc-on-a-colorlight-5a-75e#254032

_________________________________________________________________
________________________________________________________
Your E-Mail. Your Cloud. Your Office. eclipso Mail & Cloud. https://www.eclipso.de