[openocd:tickets] #342 invalid command name "hla_layout"

[Andrew E. <ae...@us...>]

---

** [tickets:#342] invalid command name "hla_layout"**

**Status:** new
**Milestone:** 0.11.0
**Created:** Wed Mar 16, 2022 08:53 PM UTC by Andrew Eidsness
**Last Updated:** Wed Mar 16, 2022 08:53 PM UTC
**Owner:** nobody


I've checked out the v0.11.0 branch and built openocd with the config parameters listed at the end.  I've actually tried several different options, the one listed at the end is "everything I could find".

I've also reproduced this on the v0.10.0 that comes bundled with my OS (Ubuntu 20.04).

I've connected a FlySwatter2 to a 1294xl, but I get an error when trying to launch with:

$ openocd -f interface/ftdi/flyswatter2.cfg -f board/ti_ek-tm4c1294xl.cfg -c init
Open On-Chip Debugger 0.11.0-dirty (2022-03-15-11:17)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Warn : Interface already configured, ignoring
/usr/local/bin/../share/openocd/scripts/interface/ti-icdi.cfg:11: Error: invalid command name "hla_layout"
in procedure 'script' 
at file "embedded:startup.tcl", line 26
at file "/usr/local/bin/../share/openocd/scripts/board/ti_ek-tm4c1294xl.cfg", line 7
at file "/usr/local/bin/../share/openocd/scripts/interface/ti-icdi.cfg", line 11

Configuration line:

$ ./configure --enable-dummy --enable-rshim --enable-ftdi --enable-stlink --enable-ti-icdi --enable-ulink --enable-usb-blaster-2 --enable-ft232r --enable-vsllink --enable-xds110 --enable-osbdm --enable-opendous --enable-aice --enable-usbprog --enable-rlink --enable-armjtagew --enable-usb-blaster --enable-presto --enable-openjtag --enable-jlink --enable-jtag_vpi --enable-jtag_dpi --enable-amtjtagaccel --enable-bcm2835gpio --enable-imx_gpio --enable-ep93xx --enable-at91rm9200 --enable-gw16012 --enable-buspirate --enable-sysfsgpio --enable-xlnx-pcie-xvc --enable-remote-bitbang



---

Sent from sourceforge.net because ope...@li... is subscribed to https://sourceforge.net/p/openocd/tickets/

To unsubscribe from further messages, a project admin can change settings at https://sourceforge.net/p/openocd/admin/tickets/options.  Or, if this is a mailing list, you can unsubscribe from the mailing list.