[OpenOCD-devel] [openocd:tickets] Re: #274 openocd error stmlink with stm32l053r8

[MURLIDHAR R. <mur...@us...>]

Thanks, Generally how much time it will take?


---

** [tickets:#274] openocd error stmlink with stm32l053r8**

**Status:** new
**Milestone:** 0.9.0
**Labels:** stm32lx flash OpenOCD ST-LINK NRST signal 
**Created:** Thu Jul 09, 2020 09:04 AM UTC by MURLIDHAR ROY
**Last Updated:** Thu Jul 09, 2020 11:13 AM UTC
**Owner:** OpenOCD-Gerrit


Hi team,
I am working in windows 10 system.
Following these instructions from starting "https://docs.rust-embedded.org/discovery/03-setup/windows.html".
hardware/board- STM32L053R8 (Nucleo64)
When I tried this command->"openocd -s C:\OpenOCD\share\scripts -f interface/stlink.cfg -f target/stm32l0x.cfg" it gives following error-

**xPack OpenOCD, x86_64 Open On-Chip Debugger 0.10.0+dev-00378-ge5be992df (2020-06-26-09:29)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
embedded:startup.tcl:26: Error: Can't find target/stm32l0x.cfg
in procedure 'script'
at file "embedded:startup.tcl", line 26**

kindly suggest to me the solution.


---

Sent from sourceforge.net because ope...@li... is subscribed to https://sourceforge.net/p/openocd/tickets/

To unsubscribe from further messages, a project admin can change settings at https://sourceforge.net/p/openocd/admin/tickets/options.  Or, if this is a mailing list, you can unsubscribe from the mailing list.