[OpenOCD-devel] [PATCH]: 847def0 nor/niietcm4: fix indentation

[<ge...@op...>]

This is an automated email from Gerrit.

Antonio Borneo (bor...@gm...) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/5082

-- gerrit

commit 847def0e40022d3c94464114ff702af3a46769af
Author: Paul Fertser <fer...@gm...>
Date:   Wed Apr 3 17:29:21 2019 +0200

    nor/niietcm4: fix indentation
    
    After replace CMD_CTX with CMD, the indentation is incorrect.
    Fix it.
    
    This change was part of http://openocd.zylin.com/1815 from Paul
    Fertser and has been extracted and rebased to simplify the review.
    
    Change-Id: I5d7c40227ceda2e9db8dab88088d74012d2254c4
    Signed-off-by: Paul Fertser <fer...@gm...>
    Signed-off-by: Tomas Vanek <va...@fb...>
    Signed-off-by: Antonio Borneo <bor...@gm...>

diff --git a/src/flash/nor/niietcm4.c b/src/flash/nor/niietcm4.c
index 62549f2..7b67bb8 100644
--- a/src/flash/nor/niietcm4.c
+++ b/src/flash/nor/niietcm4.c
@@ -426,8 +426,8 @@ COMMAND_HANDLER(niietcm4_handle_uflash_read_byte_command)
 	if (retval != ERROR_OK)
 		return retval;
 	command_print(CMD,  "Read userflash %s region:\n"
-							"address = 0x%04x,\n"
-							"value   = 0x%02x.", CMD_ARGV[0], uflash_addr, uflash_data);
+						"address = 0x%04x,\n"
+						"value   = 0x%02x.", CMD_ARGV[0], uflash_addr, uflash_data);
 	return retval;
 }
 
@@ -468,9 +468,9 @@ COMMAND_HANDLER(niietcm4_handle_uflash_write_byte_command)
 	int page_num = uflash_addr/USERFLASH_PAGE_SIZE;
 
 	command_print(CMD, "Write userflash %s region:\n"
-						   "address = 0x%04x,\n"
-						   "value   = 0x%02x.\n"
-						   "Please wait ... ", CMD_ARGV[0], uflash_addr, uflash_data);
+					   "address = 0x%04x,\n"
+					   "value   = 0x%02x.\n"
+					   "Please wait ... ", CMD_ARGV[0], uflash_addr, uflash_data);
 	/* dump */
 	uint32_t uflash_dump[USERFLASH_PAGE_SIZE];
 	niietcm4_dump_uflash_page(bank, uflash_dump, page_num, mem_type);
@@ -815,10 +815,10 @@ COMMAND_HANDLER(niietcm4_handle_extmem_cfg_command)
 		return ERROR_COMMAND_SYNTAX_ERROR;
 
 	command_print(CMD,  "Try to configure external memory boot interface:\n"
-							"port = %s\n"
-							"pin  = %s\n"
-							"func = %s\n"
-							"Please wait ...", CMD_ARGV[0], CMD_ARGV[1], CMD_ARGV[2]);
+						"port = %s\n"
+						"pin  = %s\n"
+						"func = %s\n"
+						"Please wait ...", CMD_ARGV[0], CMD_ARGV[1], CMD_ARGV[2]);
 	/* dump */
 	uint32_t uflash_dump[USERFLASH_PAGE_SIZE];
 	niietcm4_dump_uflash_page(bank, uflash_dump, 0, 1);

--