[OpenOCD-devel] [openocd:tickets] Re: #231 STM32L07x dual bank fails flashing

[Andreas B. <mer...@us...>]

Oh, yes, overlooked the watchdogs at the very end of the features list ...

I didn't mean brand-new. Just do a mass-erase and verify that option bytes are at factory settings (in particular hardware/software watchdog), power-cycle board and stlink, and restart OpenOCD. This should be sufficient to see whether the problem might be related to firmware or option settings.


---

** [tickets:#231] STM32L07x dual bank fails flashing**

**Status:** new
**Milestone:** 0.9.0
**Created:** Sun Mar 31, 2019 09:57 AM UTC by Martin Jäger
**Last Updated:** Fri Apr 05, 2019 11:31 AM UTC
**Owner:** nobody


I'm not able to flash my STM32L073 with the settings stated in https://sourceforge.net/p/openocd/code/ci/master/tree/tcl/board/st_nucleo_l073rz.cfg

If I change the WORKAREASIZE to 0x1000, everything works fine.

Do you agree to change the setting?


---

Sent from sourceforge.net because ope...@li... is subscribed to https://sourceforge.net/p/openocd/tickets/

To unsubscribe from further messages, a project admin can change settings at https://sourceforge.net/p/openocd/admin/tickets/options.  Or, if this is a mailing list, you can unsubscribe from the mailing list.