[OpenOCD-devel] [PATCH]: b9a47a5 board: consolidate st_nucleo_l4 boards

[<ge...@op...>]

This is an automated email from Gerrit.

Pushpal Sidhu (psi...@gm...) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/4313

-- gerrit

commit b9a47a589a3384c13f61758881d3a501ad76e4b7
Author: Pushpal Sidhu <psi...@gm...>
Date:   Tue Dec 5 09:36:17 2017 -0800

    board: consolidate st_nucleo_l4 boards
    
    We can now use the generic stlink.cfg which allows for both ST-LINK/V2
    and V2-1 debuggers.
    
    Change-Id: I229c6fe5f6a6a4f2d3c787a49939846f102f9e24
    Signed-off-by: Pushpal Sidhu <psi...@gm...>

diff --git a/tcl/board/st_nucleo_l4.cfg b/tcl/board/st_nucleo_l4.cfg
new file mode 100644
index 0000000..1ab9da9
--- /dev/null
+++ b/tcl/board/st_nucleo_l4.cfg
@@ -0,0 +1,11 @@
+# Should work with all STM32L4 Nucleo Dev Boards.
+# http://www.st.com/en/evaluation-tools/stm32-mcu-nucleo.html
+
+source [find interface/stlink.cfg]
+
+transport select hla_swd
+
+source [find target/stm32l4x.cfg]
+
+# use hardware reset
+reset_config srst_only srst_nogate
diff --git a/tcl/board/st_nucleo_l476rg.cfg b/tcl/board/st_nucleo_l476rg.cfg
deleted file mode 100644
index 4426c3b..0000000
--- a/tcl/board/st_nucleo_l476rg.cfg
+++ /dev/null
@@ -1,12 +0,0 @@
-# This is a ST NUCLEO L476RG board with a single STM32L476RGT6 chip.
-# http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF261636
-
-source [find interface/stlink.cfg]
-
-transport select hla_swd
-
-source [find target/stm32l4x.cfg]
-
-# use hardware reset
-reset_config srst_only srst_nogate
-

--