[OpenOCD-devel] galileo + flyswatter2

[Bill T. <btr...@gm...>]

Trying to get the galileo board working with a flyswatter2 debugger.

OpenOCD: git master
Command: openocd -f
/usr/local/share/openocd/scripts/interface/ftdi/flyswatter2.cfg -f
/usr/local/share/openocd/scripts/board/quark_x10xx_board.cfg

Results:
Info : auto-selecting first available session transport "jtag". To
override use 'transport select <transport>'.
adapter speed: 4000 kHz
trst_only separate trst_push_pull
Info : clock speed 4000 kHz
Error: JTAG scan chain interrogation failed: all ones
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: quark_x10xx.cltap: IR capture error; saw 0xff not 0x1
Warn : Bypassing JTAG setup events due to errors

Any thoughts on what's happening here?

Thanks
Bill