Re: [OpenOCD-user] Problems with Nucleo F030R8/F302R8

[Elliott P. <el...@br...>]

Hello,

On Thu, Jul 17, 2014 at 5:50 AM, Luis Rodrigues <lfr...@gm...>
wrote:

> Hi all,
> I'm trying to use openocd (dev version) to flash Nucleo F030R8, F302R8.
> Both are falling for for different reasons.
>
> For the F030R8 I can't even run openocd:
>

> ./src/openocd --search tcl/ -f board/st_nucleo_f030r8.cfg
> Open On-Chip Debugger 0.9.0-dev-00098-ge03eb89 (2014-07-17-11:05)
> Licensed under GNU GPL v2
> For bug reports, read
>     http://openocd.sourceforge.net/doc/doxygen/bugs.html
> srst_only separate srst_nogate srst_open_drain connect_deassert_srst
> Info : This adapter doesn't support configurable speed
> Error: read version failed
> in procedure 'init'
> in procedure 'ocd_bouncer'
> in procedure 'transport'
> in procedure 'init'
>

Here's my output on Windows 7, using the Nucleo driver provided by ST
(WinUSB, I believe):

C:\>openocd -f board/st_nucleo_f030r8.cfg
Open On-Chip Debugger 0.8.0 (2014-04-28-08:42)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.sourceforge.net/doc/doxygen/bugs.html
srst_only separate srst_nogate srst_open_drain connect_deassert_srst
Info : This adapter doesn't support configurable speed
Info : STLINK v2 JTAG v19 API v2 SWIM v2 VID 0x0483 PID 0x374B
Info : using stlink api v2
Info : Target voltage: 3.249012
Info : stm32f0x.cpu: hardware has 4 breakpoints, 2 watchpoints

​Driver problem?  Board jumpers?​  Can you try it on a Windows machine to
verify that the board is good?  Driver is available here (under Related
Tools and Software):
http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF259997?icmp=nucleo-ipf_pron_pr-nucleo_feb2014&sc=nucleoF030R8-pr



>
>
> -------
>
> For the F302R8 it runs fine with (I used config for 334r8 because there
> was none for 302):
> ./src/openocd --search tcl/ -f board/st_nucleo_f334r8.cfg
>
> But if I:
> ./src/openocd --search tcl/ -f board/st_nucleo_f334r8.cfg -c init -c
> "reset halt" -c "flash probe 0" -c "stm32f2x mass_erase 0" -c "flash
> write_image erase aa.hex  0x08000000" -c "reset" -c shutdown
> Open On-Chip Debugger 0.9.0-dev-00098-ge03eb89 (2014-07-17-11:05)
> Licensed under GNU GPL v2
> For bug reports, read
>     http://openocd.sourceforge.net/doc/doxygen/bugs.html
> srst_only separate srst_nogate srst_open_drain connect_deassert_srst
> Info : This adapter doesn't support configurable speed
> Info : STLINK v2 JTAG v19 API v2 SWIM v3 VID 0x0483 PID 0x374B
> Info : using stlink api v2
> Info : Target voltage: 3.259279
> Info : stm32f3x.cpu: hardware has 6 breakpoints, 4 watchpoints
> target state: halted
> target halted due to debug-request, current mode: Thread
> xPSR: 0x01000000 pc: 0x1ffff198 msp: 0x20001258
> Info : device id = 0x10016439
> Warn : Cannot identify target as a STM32 family.
> Error: auto_probe failed
> in procedure 'flash'
>
>
> Anyone has any idea?
>
>
> ------------------------------------------------------------------------------
> Want fast and easy access to all the code in your enterprise? Index and
> search up to 200,000 lines of code with a free copy of Black Duck
> Code Sight - the same software that powers the world's largest code
> search on Ohloh, the Black Duck Open Hub! Try it now.
> http://p.sf.net/sfu/bds
> _______________________________________________
> OpenOCD-user mailing list
> Ope...@li...
> https://lists.sourceforge.net/lists/listinfo/openocd-user
>
>