Re: [OpenOCD-devel] Errors during AM3517 initialization

[Andrey S. <and...@gm...>]

On 09/20/2013 05:03 PM, Andrey Skvortsov wrote:
> Hello, guys.
> 
> When I am connecting to the target for a first time after reset, I see
> error messages:
> 
> Error: JTAG-DP STICKY ERROR
> Error: MEM_AP_CSW 0x80000042, MEM_AP_TAR 0x54011140
> Error: JTAG-DP STICKY ERROR
> Error: MEM_AP_CSW 0x80000042, MEM_AP_TAR 0x54011140
> Error: JTAG-DP STICKY ERROR
> Error: MEM_AP_CSW 0x80000042, MEM_AP_TAR 0x54011140
> Error: JTAG-DP STICKY ERROR
> Error: MEM_AP_CSW 0x80000042, MEM_AP_TAR 0x54011140
> Error: JTAG-DP STICKY ERROR
> Error: MEM_AP_CSW 0x80000042, MEM_AP_TAR 0x54011150
> Error: JTAG-DP STICKY ERROR
> Error: MEM_AP_CSW 0x80000042, MEM_AP_TAR 0x54011150
> Error: JTAG-DP STICKY ERROR
> Error: MEM_AP_CSW 0x80000042, MEM_AP_TAR 0x540111c0
> Error: JTAG-DP STICKY ERROR
> Error: MEM_AP_CSW 0x80000042, MEM_AP_TAR 0x540111c0
> 
> 
> All connections after that go without these errors. This is not a major
> bug, because despite there error messages debug session works like usual.
> 
> 
> 
> Configuration:
> 
> JTAG adapter: Olimex ARM-USB-TINY-H
> OpenOCD: 0.7.0
> Target: AM3517 / TAM3517 Twister board
> Command line:
> 
> openocd-X64-0.7.0.exe -d 3 -f "C:\D\Andrey.Skvortsov\Virtual
> Machines\Shared\openocd-0.7.0\scripts\interface\olimex-arm-usb-tiny-h.cfg"
> -c "adapter_khz 10000" -f "C:\D\Andrey.Skvortsov\Virtual
> Machines\Shared\openocd-0.7.0\scripts\board\am3517evm.cfg"
> 

Sorry, guys.

I forgot to attach debug logs.