Re: [OpenOCD-user] Test/debugging jtag interface

[Spencer O. <sp...@sp...>]

On 26 March 2013 13:03, Karl Hammar <ka...@as...> wrote:
>>
>> strange, does the new ftdi driver work ? It requires libusb-1.0 or libusbx
>> build with --enable-ftdi and slight tweak of your config - note the
>> added ftdi in the path.
>> source [find interface/ftdi/olimex-arm-usb-ocd-h.cfg]
>
> Same thing (using the libusb-1.0).
>
>> I will run a check to see if it is working for me with your setup.
>

Just run a quick test using both the old ftdi driver and the new one,
both working as expected.

> Don't forget that the setup used to work, something must have
> happened between to flashing runs, since it worked and then tree
> minutes later I consistently gets "Error: timed out while
> waiting for target halted".
>
> So my guess is that the olimex dongle is faulty. And I feel I more or
> less have confirmed it now that the parport one works.
>

It may be looking that way :(

Spen