Re: [OpenOCD-user] OpenOCD-0.6-rc1 + STLink-v2

[Spencer O. <sp...@sp...>]

On 28 August 2012 10:20, Elker Cavina <elk...@gm...> wrote:
> I've successfully used openocd 0.6-rc1 with stm32f4 discovery, using
> stock config files (with integrated stlink using swd). Now I need to use
> openocd with 2 stm32f4 connected in daisy-chain via jtag (as far as I
> know, swd can't handle chaining); I'm using a Stlink-v2 external dongle
> with a 20pin connector. The configuration script arranged is the following:
>
>

just skip the bs declaration, eg.

# core 1
stlink newtap $_CHIPNAME cpu1 -expected-id $_CPUTAPID1
#core 2
stlink newtap $_CHIPNAME cpu2 -expected-id $_CPUTAPID2

set _TARGETNAME $_CHIPNAME.cpu1
target create $_TARGETNAME stm32_stlink -chain-position $_TARGETNAME

have a look at the following for an example i have seen.
https://github.com/mossmann/hackrf/wiki/LPC43xx-Debugging

Cheers
Spen