Menu
▾
▴
[OpenOCD-user] Porting OpenOCD on ARM (corss-compiling problems)
|
From: Safwen C. <che...@gm...> - 2012-07-25 15:17:00
|
*Here is the probleme, i'm trying a portage of openOCD and all its features on an ARM board (beagleboard xm).* *I've read in the README file that we can cross-compile it, i did and it generated the Makefile thanks to "./configure --buil=.... --host=arm-none-linux-gnueabi ..." (the codesourcery toolchain). * *But when i try to make it with "make" it works also fine until this.* /opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld: jimsh.o: Relocations in generic ELF (EM: 3) /opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld: jimsh.o: Relocations in generic ELF (EM: 3) /opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld: jimsh.o: Relocations in generic ELF (EM: 3) /opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld: jimsh.o: Relocations in generic ELF (EM: 3) /opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld: jimsh.o: Relocations in generic ELF (EM: 3) /opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld: jimsh.o: Relocations in generic ELF (EM: 3) /opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld: jimsh.o: Relocations in generic ELF (EM: 3) /opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld: jimsh.o: Relocations in generic ELF (EM: 3) jimsh.o: could not read symbols: File in wrong format collect2: ld returned 1 exit status make[2]: * [jimsh] Erreur 1 *I have no idea about what could be the problem.* *Thanks for the help guys !!* * * |