[OpenOCD-user] Porting OpenOCD on ARM (beagleboard xm)

[Safwen C. <che...@gm...>]

*I really need your help because i'm stuck in the lasts steps. Here is the
probleme, i'm trying a portage of openOCD and all its features on an ARM
board (beagleboard xm). I've read in the README file that we can
cross-compile it, i did and it generated the Makefile thanks to
"./configure --buil=.... --host=arm-none-linux-gnueabi ..." (the
codesourcery toolchain). But when i try to make it with "make" it works
also fine until this.*

/opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld:
jimsh.o: Relocations in generic ELF (EM: 3)
/opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld:
jimsh.o: Relocations in generic ELF (EM: 3)
/opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld:
jimsh.o: Relocations in generic ELF (EM: 3)
/opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld:
jimsh.o: Relocations in generic ELF (EM: 3)
/opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld:
jimsh.o: Relocations in generic ELF (EM: 3)
/opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld:
jimsh.o: Relocations in generic ELF (EM: 3)
/opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld:
jimsh.o: Relocations in generic ELF (EM: 3)
/opt/CodeSourcery/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.3/../../../../arm-none-linux-gnueabi/bin/ld:
jimsh.o: Relocations in generic ELF (EM: 3) jimsh.o: could not read
symbols: File in wrong format collect2: ld returned 1 exit status make[2]:
* [jimsh] Erreur 1

*need help please !! thank you.*