From: Tormod V. <lis...@gm...> - 2010-12-20 22:59:43
|
From: Tormod Volden <deb...@gm...> On these boards (Olimex, IAR) an R-T jumper shorting RST and TRST is soldered from the factory. Add reset_config trst_and_srst to make reset work out of the box. --- Hi, I did not get any response on my two questions, but here is the patch that I would suggest. It has been tested on the IAR board. The vague effect-cause formulation in the commit message reflects my trouble to understand the documentation as I mentioned earlier. Cheers, Tormod tcl/board/olimex_stm32_h103.cfg | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/tcl/board/olimex_stm32_h103.cfg b/tcl/board/olimex_stm32_h103.cfg index 98b0b65..71d4aca 100644 --- a/tcl/board/olimex_stm32_h103.cfg +++ b/tcl/board/olimex_stm32_h103.cfg @@ -5,3 +5,6 @@ set WORKAREASIZE 0x5000 source [find target/stm32.cfg] + +# trst and srst are shorted by R-T jumper +reset_config trst_and_srst -- 1.7.0.4 |