From: Xiaofan C. <xia...@gm...> - 2009-07-31 15:33:27
|
On Fri, Jul 31, 2009 at 7:56 PM, Xiaofan Chen<xia...@gm...> wrote: > Not really. It seems that some Ubuntu 9.04 updates yesterday messed up with > OpenOCD now. Actually it crashed now with ftdi interface. > The same result for Arch Linux with the latest svn version V2571. Again release version V0.2.0 works fine with the on-board ftdi interface. [mcuee@myhost lm3s1968]$ openocd -f interface/luminary.cfg -f lm3s1968.cfg Open On-Chip Debugger 0.3.0-in-development (2009-07-31-21:18) svn:2571 $URL: svn://svn.berlios.de/openocd/trunk/src/openocd.c $ For bug reports, read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS 3000 kHz jtag_nsrst_delay: 100 jtag_ntrst_delay: 100 Info : JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) Info : JTAG Tap/device matched Info : accepting 'telnet' connection from 0 Info : JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) Info : JTAG Tap/device matched target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x01000000 pc: 0x00000470 msp: 0x20000198 auto erase enabled Info : Algorithm flash write 1710 words to 0x0, 1710 remaining Segmentation fault [mcuee@myhost ~]$ telnet localhost 4444 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Open On-Chip Debugger > init > reset halt JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) JTAG Tap/device matched target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x01000000 pc: 0x00000470 msp: 0x20000198 > flash write_image erase ./StellarisWare/boards/ek-lm3s1968/graphics/gcc/graphics.bin auto erase enabled Algorithm flash write 1710 words to 0x0, 1710 remaining Connection closed by foreign host. -- Xiaofan http://mcuee.blogspot.com |