[Openocd-development] [PATCH] Fix hammer.cfg

[Carlos A. <cma...@no...>]

Hello!

I was finally able to program the flash of the Hammer target using the 
flyswatter. The problem was related to a couple of typos on the 
hammer.cfg config file. Please, find attached the svn diff against trunk 
that fixes the problem.

Thanks!

Carlos Antunes


Index: src/target/target/hammer.cfg
===================================================================
--- src/target/target/hammer.cfg        (revision 1187)
+++ src/target/target/hammer.cfg        (working copy)
@@ -10,7 +10,7 @@
 
 
 target create target0 arm920t -endian little -chain-position 0 -variant 
arm920t
-[new_target_name] configure -work-area-virt 0 -work-area-phys 
0x40800000 -work-area-size 0x20000 -work-area-backup 0
+[new_target_name] configure -work-area-virt 0 -work-area-phys 
0x30800000 -work-area-size 0x20000 -work-area-backup 0
 [new_target_name] configure -event reset-init {
        # Reset Script for the TinCanTools S3C2410 Based Hammer Module
        # http://www.tincantools.com
@@ -39,7 +39,7 @@
 }
 
 # speed up memory downloads
-arm7 fast_memory_access enable
+arm7_9 fast_memory_access enable
 arm7_9 dcc_downloads enable
 
 #flash configuration