[Openbts-discuss] Help getting openBTS 5.0 using Ettus B210

[Dunham, J. <Jac...@ul...>]

Hi,

I'm using an Ettus B210 w/ openBTS v5.0, on Ubuntu 14.04.05 (32bit), and I'm wondering if anyone has been able to get a similar setup working. (Per prior threads on the mailing-lists, it seems like not?)

I've had no success getting an unlocked quad-band Android 6.0 handset to connect-to / register-with my openbts network. The device can "see" the test network under the "carriers" setting, but are never able to successfully connect. Also, the tmsis command in OpenBTSCLI shows no evidence of an attempt to connect (no results).

All of the components are running: sipauthserve, smqueue, asterisk, openbts, and there are no obvious errors in /var/log/syslog, nor in any of the associated /var/log/upstart/* logs.

In OpenBTSCLI, I've adjusted the GSM.Radio.RxGain to "10", and set power to -20, via "power 20" command, per the Range Networks' "Getting Starting with OpenBTS" guide (and subsequently restarted). The "noise" command show that the current noise level is acceptable, and I've also set Control.LUR.OpenRegistration to ".*"

FWIW, I'm running v3.10.1.1 of libuhd-dev,libuhd003, and uhd-host

Thanks in advance!
Jack




This e-mail may contain privileged or confidential information. If you are not the intended recipient: (1) you may not disclose, use, distribute, copy or rely upon this message or attachment(s); and (2) please notify the sender by reply e-mail, and then delete this message and its attachment(s). Underwriters Laboratories Inc. and its affiliates disclaim all liability for any errors, omissions, corruption or virus in this message or any attachments.