Re: [Openbts-discuss] OpenBTS 5.0 (latest version) compiler problems on Ubuntu Desktop 14.04

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

Hello,

I tried installing OpenBTS (Master branch) on a completely fresh install of
Ubuntu Desktop 16.04 running on a VM (with latest UHD 3.9.4 driver) for a
USRP B200.

I repeatedly tried to build the whole thing but it get systematically stuck
there :

>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> *In file included from /usr/include/uhd/version.hpp:21:0,
>  from UHDDevice.cpp:25:/usr/include/uhd/config.hpp:21:28: fatal error:
> boost/config.hpp: No such file or directorycompilation
> terminated.Makefile:665: recipe for target 'UHDDevice.lo' failedmake[3]:
> *** [UHDDevice.lo] Error 1make[3]: Leaving directory
> '/home/thomas/dev/openbts/Transceiver52M'Makefile:572: recipe for target
> 'all-recursive' failedmake[2]: *** [all-recursive] Error 1make[2]: Leaving
> directory '/home/thomas/dev/openbts'Makefile:503: recipe for target 'all'
> failedmake[1]: *** [all] Error 2make[1]: Leaving directory
> '/home/thomas/dev/openbts'debian/rules:74: recipe for target 'install-arch'
> failedmake: *** [install-arch] Error 2dpkg-buildpackage: error: fakeroot
> debian/rules binary gave error exit status 2# ERROR: command failed!*

Any hint ?

Regards,
Thomas

2016-07-07 21:55 GMT+02:00 Michael Iedema <mic...@ra...>
:

> I pushed quite a few fixes to the components last night to make sure they
> work on 16.04. Give the new-new asterisk a shot and let me know.
>
> With the last group of changes, I’ve been able to repeatedly build
> everything from scratch, install and register+call+text on an N210.
>
> $ cd dev
> $ git pull
> $ ./pull.sh
> $ ./switchto.sh master
> $ ./build.sh your-radio
>
> Or try a completely fresh clone to be sure...
>
> > On Jul 6, 2016, at 3:37 PM, Ralph A. Schmid, dk5ras <ra...@sc...>
> wrote:
> >
> > I also commented out the five lines to check for UHD, as I already have
> UHD on my system - then compiling everything went fine. OpenBTS runs, just
> the new asterisk does not work, no calls are possible. When I install all
> but the newly compiled asterisk and keep using the asteirsk from December
> of 2015, OpenBTS is fully functional.
> >
> > Ralph.
> >
> > From: Rene Groothuis [mailto:RGr...@ir...]
> > Sent: Wednesday, July 6, 2016 10:13 AM
> > To: ope...@li...
> > Subject: [Openbts-discuss] OpenBTS 5.0 (latest version) compiler
> problems on Ubuntu Desktop 14.04
> >
> > Hi All,
> >
> > I started from scratch again to install OpenBTS on a Parallels Virtual
> Machine environment. Below the steps I followed and the problems I found. I
> was not able to compile the complete code. Any help would be appreciated.
> >
> > Thanks.
> >
> > Cheers, Rene
> >
> > =========================
> >
> > For the installation if OpentBTS the following guidelines are used:
> http://openbts.org/w/index.php?title=BuildInstallRun
> >
> > Steps to install the latest version of OpentBTS on Ubuntu Desktop 14.04;
> >
> >       • Install Ubuntu ubuntu-14.04.4-desktop-i386.iso on a Parallels VM.
> >       • sudo apt-get update
> >       • sudo apt-get upgrade
> >       • sudo apt-get install software-properties-common
> python-software-properties
> >       • sudo apt-get update
> >       •
> >       • sudo apt-get install git
> >       • mkdir openbts
> >       • cd openbts
> >       • git clone https://github.com/RangeNetworks/dev.git
> >       • checked gut version.
> >       • cd dev
> >       • sudo apt-get install autoconf libtool libosip2-dev libortp-dev
> libusb-1.0-0-dev g++ sqlite3 libsqlite3-dev erlang libreadline6-dev
> libncurses5-dev
> >       • ./switchto.sh master
> >       • There is no a53/trunk directory so this couldn’t be installed.
> >       • sudo ./build.sh N210
> >
> > Building the code gave me the following error situation:
> >
> >> Processing triggers for libc-bin (2.19-0ubuntu6.9) ...
> >> dpkg-query: package 'libzmq5' is not installed and no information is
> available
> >> Use dpkg --info (= dpkg-deb --info) to examine archive files,
> >> and dpkg --contents (= dpkg-deb --contents) to list their contents.
> >> # - missing libzmq5, installing dependency
> >> Reading package lists... Done
> >> Building dependency tree
> >> Reading state information... Done
> >> E: Unable to locate package libzmq5
> >> # - ERROR : libzmq5 package was unable to be installed
> >> openbts@ubuntu:~/openbts/dev$
> >
> > 17. In build.sh changed the line “installIfMissing libzmq5” into
> “installIfMissing libzmq3” because the version 3 library is installed on
> the system. I passed the error situation above and the compiling went ahead.
> > 18. Then I ran into the following error situation and it stopped
> compiling.
> >
> >> /bin/bash ../libtool  --tag=CXX   --mode=compile g++ -DHAVE_CONFIG_H
> -I. -I..   -D'REPO_REV="b4c16be0e5 CommonLibs:11d8baa826"' -I../apps
> -I../CommonLibs -I../Control -I../GSM -I../GSMShare -I../GPRS -I../SGSNGGSN
> -I../SIP -I../SMS -I../TRXManager -I../Globals -I../CLI -I../Peering
> -I../NodeManager -I../NodeManager/JsonBox-0.4.3/include -I../Scanning    -g
> -O2 -Wall -pthread -ldl -rdynamic -DTIMESTAMP_ISO=`date
> +'"%Y-%m-%dT%H:%M:%S"'`  -MT UHDDevice.lo -MD -MP -MF .deps/UHDDevice.Tpo
> -c -o UHDDevice.lo UHDDevice.cpp
> >> libtool: compile:  g++ -DHAVE_CONFIG_H -I. -I..
> "-DREPO_REV=\"b4c16be0e5 CommonLibs:11d8baa826\"" -I../apps -I../CommonLibs
> -I../Control -I../GSM -I../GSMShare -I../GPRS -I../SGSNGGSN -I../SIP
> -I../SMS -I../TRXManager -I../Globals -I../CLI -I../Peering
> -I../NodeManager -I../NodeManager/JsonBox-0.4.3/include -I../Scanning -g
> -O2 -Wall -pthread -ldl -rdynamic -DTIMESTAMP_ISO=\"2016-07-06T09:23:38\"
> -MT UHDDevice.lo -MD -MP -MF .deps/UHDDevice.Tpo -c UHDDevice.cpp  -fPIC
> -DPIC -o .libs/UHDDevice.o
> >> In file included from /usr/include/uhd/version.hpp:21:0,
> >>                  from UHDDevice.cpp:25:
> >> /usr/include/uhd/config.hpp:21:28: fatal error: boost/config.hpp: No
> such file or directory
> >>  #include <boost/config.hpp>
> >>                             ^
> >> compilation terminated.
> >> make[3]: *** [UHDDevice.lo] Error 1
> >> make[3]: Leaving directory
> `/home/openbts/openbts/dev/openbts/Transceiver52M'
> >> make[2]: *** [all-recursive] Error 1
> >> make[2]: Leaving directory `/home/openbts/openbts/dev/openbts'
> >> make[1]: *** [all] Error 2
> >> make[1]: Leaving directory `/home/openbts/openbts/dev/openbts'
> >> make: *** [install-arch] Error 2
> >> dpkg-buildpackage: error: debian/rules binary gave error exit status 2
> >> # ERROR: command failed!
> >> openbts@ubuntu:~/openbts/dev$
> >
> > 19. sudo apt-get update
> > 20. sudo apt-get install libuhd-dev
> >
> >> Fetched 3,109 kB in 9s (320 kB/s)
> >> Reading package lists... Done
> >> openbts@ubuntu:~/openbts/dev$ sudo apt-get install libuhd-dev
> >> Reading package lists... Done
> >> Building dependency tree
> >> Reading state information... Done
> >> libuhd-dev is already the newest version.
> >> The following packages were automatically installed and are no longer
> required:
> >>   libntdb1 python-ntdb
> >> Use 'apt-get autoremove' to remove them.
> >> 0 upgraded, 0 newly installed, 0 to remove and 7 not upgraded.
> >> openbts@ubuntu:~/openbts/dev$
> >
> > 21. sudo ./pull.sh
> >
> > All packages are up to date
> >
> > 22. sudo ./build.sh N210
> >
> > and still I got the same error situation. This is logical as nothing has
> changed between this build and the previous one.
> >
> >> /bin/bash ../libtool  --tag=CXX   --mode=compile g++ -DHAVE_CONFIG_H
> -I. -I..   -D'REPO_REV="b4c16be0e5 CommonLibs:11d8baa826"' -I../apps
> -I../CommonLibs -I../Control -I../GSM -I../GSMShare -I../GPRS -I../SGSNGGSN
> -I../SIP -I../SMS -I../TRXManager -I../Globals -I../CLI -I../Peering
> -I../NodeManager -I../NodeManager/JsonBox-0.4.3/include -I../Scanning    -g
> -O2 -Wall -pthread -ldl -rdynamic -DTIMESTAMP_ISO=`date
> +'"%Y-%m-%dT%H:%M:%S"'`  -MT UHDDevice.lo -MD -MP -MF .deps/UHDDevice.Tpo
> -c -o UHDDevice.lo UHDDevice.cpp
> >> libtool: compile:  g++ -DHAVE_CONFIG_H -I. -I..
> "-DREPO_REV=\"b4c16be0e5 CommonLibs:11d8baa826\"" -I../apps -I../CommonLibs
> -I../Control -I../GSM -I../GSMShare -I../GPRS -I../SGSNGGSN -I../SIP
> -I../SMS -I../TRXManager -I../Globals -I../CLI -I../Peering
> -I../NodeManager -I../NodeManager/JsonBox-0.4.3/include -I../Scanning -g
> -O2 -Wall -pthread -ldl -rdynamic -DTIMESTAMP_ISO=\"2016-07-06T10:07:12\"
> -MT UHDDevice.lo -MD -MP -MF .deps/UHDDevice.Tpo -c UHDDevice.cpp  -fPIC
> -DPIC -o .libs/UHDDevice.o
> >> In file included from /usr/include/uhd/version.hpp:21:0,
> >>                  from UHDDevice.cpp:25:
> >> /usr/include/uhd/config.hpp:21:28: fatal error: boost/config.hpp: No
> such file or directory
> >>  #include <boost/config.hpp>
> >>                             ^
> >> compilation terminated.
> >> make[3]: *** [UHDDevice.lo] Error 1
> >> make[3]: Leaving directory
> `/home/openbts/openbts/dev/openbts/Transceiver52M'
> >> make[2]: *** [all-recursive] Error 1
> >> make[2]: Leaving directory `/home/openbts/openbts/dev/openbts'
> >> make[1]: *** [all] Error 2
> >> make[1]: Leaving directory `/home/openbts/openbts/dev/openbts'
> >> make: *** [install-arch] Error 2
> >> dpkg-buildpackage: error: debian/rules binary gave error exit status 2
> >> # ERROR: command failed!
> >> openbts@ubuntu:~/openbts/dev$
> >
> >
> > How to resolve from this error message?
> >
> > Cheers, Rene
> >
> >
> ------------------------------------------------------------------------------
> > Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> > Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> > present their vision of the future. This family event has something for
> > everyone, including kids. Get more information and register today.
> > http://sdm.link/attshape_______________________________________________
> > Openbts-discuss mailing list
> > Ope...@li...
> > https://lists.sourceforge.net/lists/listinfo/openbts-discuss
>
>
> ------------------------------------------------------------------------------
> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> present their vision of the future. This family event has something for
> everyone, including kids. Get more information and register today.
> http://sdm.link/attshape
> _______________________________________________
> Openbts-discuss mailing list
> Ope...@li...
> https://lists.sourceforge.net/lists/listinfo/openbts-discuss
>

Re: [Openbts-discuss] OpenBTS 5.0 (latest version) compiler problems on Ubuntu Desktop 14.04

GSM L1-L3 stack with SIP network interfaces

Re: [Openbts-discuss] OpenBTS 5.0 (latest version) compiler problems on Ubuntu Desktop 14.04