Menu
▾
▴
Re: [Openbts-discuss] OpenBTS-UMTS Success anyone?
|
From: Neel P. <nee...@et...> - 2016-04-27 20:56:50
|
Hello Frédéric: About six months ago, we successfully ran OpenBTS-UMTS, Release 5, using either a B210 or N210 with WBX (I don't remember which, it might have been both). We didn't stress-test the network with a large number of handsets and high data traffic, but we ran it for many hours, with handsets camped on the networks doing various things. I noticed from one of your previous emails that you're running UHD version 3.9.3. There was an issue in that release with full-duplex operation. I would suggest that you step back to version 3.9.2, and try running it again. Please let us know your results. I assume that you're using TransceiverUHD, which should be fine. Which USRP are you using? Any B200/B210, N200/N210, X300/X310 should also be fine. --Neel Pandeya On 27 April 2016 at 10:28, Daigle, Frédéric <fd...@cm...> wrote: > Hi Harvind, > > > Thank you for the motivation message. ;) > > > Attached you will find the ouput resulting from launching OpenBTS-UMTS. > The log shows some alertt at the end, the CLI opens up and TX/RX/Clk Leds > are lit on my USRP. However, no signal is detected at the output of my USRP > (I have verified with a spectrum analyser and 3 different phones) > > > Please tell me what other logs/information you would need. > > > Thanks again, > > Frédéric > > > ________________________________ > De : Harvind Samra <ha...@ra...> > Envoyé : 27 avril 2016 11:49 > À : Daigle, Frédéric > Cc : ope...@li... > Objet : Re: [Openbts-discuss] OpenBTS-UMTS Success anyone? > > Lots of people are using our commercial and public UMTS stacks. So relax. > :) > > Have you posted a partial or full log file for us to see? I haven’t seen > one yet. > > Harvind Samra > Founder, CTO > Range Networks > > > [cid:image001.png@01D04D54.55755990]<http://www.rangenetworks.com/> > <http://www.rangenetworks.com/> > <http://www.rangenetworks.com/> > <http://www.rangenetworks.com/> > <http://www.rangenetworks.com/> > <http://www.rangenetworks.com/> > <http://www.rangenetworks.com/> > <http://www.rangenetworks.com/> > LinkedIn<https://www.linkedin.com/company/range-networks> | Facebook< > https://www.facebook.com/RangeNetworks> | Twitter< > https://twitter.com/RangeNetworks> | Jobs < > http://www.rangenetworks.com/#!careers/cd2h> | #RangeNetworks #OpenBTS > ____________________________________________ > > Cellular networks made simple and affordable. > http://www.rangenetworks.com<http://www.rangenetworks.com/> > ____________________________________________ > > > > > > > > On Apr 27, 2016, at 6:47 AM, Daigle, Frédéric <fd...@cm... > <mailto:fd...@cm...>> wrote: > > Hi again , > > Should I conclude that OpenBTS -UMTS is not ready yet as no one seems to > have achieved to install a functionnal UMTS network?! > > I'm simply trying to have a clear idea on the feasibilty of seeting up > OpenBTS -UMTS before spending more time on this project. > > Thanks again , > Frédéric > > > > ________________________________ > De : Daigle, Frédéric <fd...@cm...<mailto: > fd...@cm...>> > Envoyé : 21 avril 2016 15:19 > À : 'ope...@li...<mailto: > ope...@li...>' > Objet : Re: [Openbts-discuss] OpenBTS-UMTS Success anyone? > > Hi Harvind, > > Your mean the HW? > > It’s a i3, and here are the result of “lscpu”command: > > Architecture: i686 > CPU op-mode(s): 32-bit, 64-bit > Byte Order: Little Endian > CPU(s): 4 > On-line CPU(s) list: 0-3 > Thread(s) per core: 2 > Core(s) per socket: 2 > Socket(s): 1 > Vendor ID: GenuineIntel > CPU family: 6 > Model: 42 > Stepping: 7 > CPU MHz: 1600.000 > BogoMIPS: 6185.37 > Virtualization: VT-x > L1d cache: 32K > L1i cache: 32K > L2 cache: 256K > L3 cache: 3072K > > De : Harvind Samra [mailto:ha...@ra...] > Envoyé : 21 avril 2016 15:11 > À : Daigle, Frédéric > Cc : ope...@li...<mailto: > ope...@li...> > Objet : Re: [Openbts-discuss] OpenBTS-UMTS Success anyone? > > What is your host platform? > > Sent from my iPhone > > On Apr 21, 2016, at 12:10 PM, Daigle, Frédéric <fd...@cm... > <mailto:fd...@cm...><mailto:fd...@cm...>> > wrote: > Hi all, > > As the default UARFCN is 3050, I have looked at 950 MHz (DL frequency) > with a spectrum analyser and realized that nothing was getting out of my > USRP N210. In fact, 4 or 5 seconds after sending the “start openbts-umts” > command, I can see a short burst, and nothing after. I see the same burst > immediately after sending the “stop openbts-umts” command. > > In other words my BTS is not transmitting! > > Here are my alarms messages: > > OpenBTS-UMTS> alarms > ALERT 3072493312 15:00:38.9 OpenBTS-UMTS.cpp:166:main: OpenBTS-UMTS > (re)starting, ver 1.0-master build date Apr 19 2016 > ALERT 3072493312 15:00:38.9 UMTSPhCh.cpp:654:chConflict: Attempt to > reserve channel: sf=64 chcode=2 which conflicts with reserved channel: > sf=32 chcode=1 > ALERT 3072493312 15:00:38.9 UMTSPhCh.cpp:654:chConflict: Attempt to > reserve channel: sf=256 chcode=2 which conflicts with reserved channel: > sf=128 chcode=1 > ALERT 3072493312 15:00:38.9 UMTSPhCh.cpp:654:chConflict: Attempt to > reserve channel: sf=64 chcode=3 which conflicts with reserved channel: > sf=32 chcode=1 > ALERT 3072493312 15:00:38.9 UMTSPhCh.cpp:654:chConflict: Attempt to > reserve channel: sf=256 chcode=4 which conflicts with reserved channel: > sf=128 chcode=2 > ALERT 3072493312 15:00:38.9 UMTSPhCh.cpp:654:chConflict: Attempt to > reserve channel: sf=64 chcode=2 which conflicts with reserved channel: > sf=32 chcode=1 > ALERT 3072493312 15:00:38.9 UMTSPhCh.cpp:654:chConflict: Attempt to > reserve channel: sf=256 chcode=0 which conflicts with reserved channel: > sf=128 chcode=0 > ALERT 3072493312 15:00:38.9 UMTSPhCh.cpp:654:chConflict: Attempt to > reserve channel: sf=256 chcode=1 which conflicts with reserved channel: > sf=128 chcode=0 > > > Anyone has a clue on how to solve this issue? > > Any form of help or encouragement will be appreciated! > > Thank you, > Frédéric > > PS: Here is the full message thread the I have after launching > OpenbenBTS-UMTS (i.e. sudo ./OpenBTS-UMTS) > > openbts@UMTS:/OpenBTS$ sudo ./OpenBTS-UMTS > 1461265388.424099 3073120000: > > OpenBTS, OpenBTS-UMTS > Copyright 2008, 2009, 2010 Free Software Foundation, Inc. > Copyright 2010 Kestrel Signal Processing, Inc. > Copyright 2011, 2012, 2013, 2014 Range Networks, Inc. > Release 1.0-master P formal build date 2016-04-19T10:41:27 1df760735b > CommonLibs:1df760735b > "OpenBTS" is a trademark of Range Networks, Inc. > "OpenBTS-UMTS" is a trademark of Range Networks, Inc. > > Contributors: > Range Networks, Inc.: > David Burgess, Harvind Samra, Donald Kirker, Doug Brown, Pat Thompson, > Michael Iedema > Kestrel Signal Processing, Inc.: > David Burgess, Harvind Samra, Raffi Sevlian, Roshan Baliga > GNU Radio: > Johnathan Corgan > Others: > Anne Kwong, Jacob Appelbaum, Joshua Lackey, Alon Levy > Alexander Chemeris, Alberto Escudero-Pascual > Incorporated GPL libraries and components: > libosip2 (LGPL), liportp2 (LGPL) > > This program comes with ABSOLUTELY NO WARRANTY. > > Use of this software may be subject to other legal restrictions, > including patent licsensing and radio spectrum licensing. > All users of this software are expected to comply with applicable > regulations and laws. See the LEGAL file in the source code for > more information. > > ALERT 3073120000 15:03:08.5 OpenBTS-UMTS.cpp:166:main: OpenBTS-UMTS > (re)starting, ver 1.0-master build date Apr 19 2016 > 1461265388.556708 3073120000: > Starting the system... > TBSIZE: 260 > RACH radioFrameSize=1200 total=1200 tbsize=256 > TBSIZE: 360 > FACH SF=64 radioFrameSize=1080 total=1080 tbsize=360 > > TBSIZE: 260 > RACH radioFrameSize=1200 total=1200 tbsize=256 > TBSIZE: 360 > FACH SF=64 radioFrameSize=1080 total=1080 tbsize=360 > > RACH TFS: mPresent=2 mMaxTfSize=0 mMaxTbSize=0 multiplexed=1 mTTI=10 > mTypeOfChannelCoding=2 mRateMatchingAttribute=256 mCRCSize=16 TF( > mTBSize=256 mNumTB=1) TF( mTBSize=256 mNumTB=2) > FACH TFS: mPresent=2 mMaxTfSize=0 mMaxTbSize=0 multiplexed=1 mTTI=10 > mTypeOfChannelCoding=2 mRateMatchingAttribute=256 mCRCSize=12 TF( > mTBSize=360 mNumTB=0) TF( mTBSize=360 mNumTB=1) > chReserve(64,2) > ALERT 3073120000 15:03:08.5 UMTSPhCh.cpp:654:chConflict: Attempt to > reserve channel: sf=64 chcode=2 which conflicts with reserved channel: > sf=32 chcode=1 > chReserve(256,2) > ALERT 3073120000 15:03:08.5 UMTSPhCh.cpp:654:chConflict: Attempt to > reserve channel: sf=256 chcode=2 which conflicts with reserved channel: > sf=128 chcode=1 > chReserve(64,3) > ALERT 3073120000 15:03:08.5 UMTSPhCh.cpp:654:chConflict: Attempt to > reserve channel: sf=64 chcode=3 which conflicts with reserved channel: > sf=32 chcode=1 > chReserve(256,4) > ALERT 3073120000 15:03:08.5 UMTSPhCh.cpp:654:chConflict: Attempt to > reserve channel: sf=256 chcode=4 which conflicts with reserved channel: > sf=128 chcode=2 > chReserve(64,2) > ALERT 3073120000 15:03:08.5 UMTSPhCh.cpp:654:chConflict: Attempt to > reserve channel: sf=64 chcode=2 which conflicts with reserved channel: > sf=32 chcode=1 > Dumping SIB5... > SysInfoType5 ::= { > sib6indicator: FALSE > pich-PowerOffset: -10 > modeSpecificInfo: fdd ::= { > aich-PowerOffset: -10 > } > primaryCCPCH-Info: fdd ::= { > tx-DiversityIndicator: FALSE > } > prach-SystemInformationList: PRACH-SystemInformationList ::= { > PRACH-SystemInformation ::= { > prach-RACH-Info: PRACH-RACH-Info ::= { > modeSpecificInfo: fdd ::= { > availableSignatures: 20 00 > availableSF: 0 (sfpr32) > preambleScramblingCodeWordNumber: 0 > puncturingLimit: 15 (pl1) > availableSubChannelNumbers: 00 20 > } > } > transportChannelIdentity: 3 > rach-TransportFormatSet: CommonTransChTFS ::= { > tti: CommonDynamicTF-InfoList ::= { > CommonDynamicTF-Info ::= { > rlc-Size: fdd ::= { > octetModeRLC-SizeInfoType2: 26 > } > numberOfTbSizeList: numberOfTbSizeList ::= { > <present> > 2 > } > logicalChannelList: <present> > } > } > semistaticTF-Information: SemistaticTF-Information ::= { > channelCodingType: 0 (half) > rateMatchingAttribute: 256 > crc-Size: 3 (crc16) > } > } > rach-TFCS: TFCS-ReconfAdd ::= { > ctfcSize: ctfc2Bit ::= { > TFCS-ReconfAdd-foo2 ::= { > ctfc2: 0 > powerOffsetInformation: PowerOffsetInformation ::= { > gainFactorInformation: SignalledGainFactors ::= > { > modeSpecificInfo: fdd ::= { > gainFactorBetaC: 15 > } > gainFactorBetaD: 15 > } > powerOffsetPp-m: 2 > } > } > TFCS-ReconfAdd-foo2 ::= { > ctfc2: 1 > powerOffsetInformation: PowerOffsetInformation ::= { > gainFactorInformation: SignalledGainFactors ::= > { > modeSpecificInfo: fdd ::= { > gainFactorBetaC: 15 > } > gainFactorBetaD: 15 > } > powerOffsetPp-m: 2 > } > } > } > } > prach-Partitioning: fdd ::= { > ASCSetting-FDD ::= { > accessServiceClass-FDD: AccessServiceClass-FDD ::= { > availableSignatureStartIndex: 0 > availableSignatureEndIndex: 0 > assignedSubChannelNumber: F0 > } > } > } > ac-To-ASC-MappingTable: AC-To-ASC-MappingTable ::= { > 0 > 0 > 0 > 0 > 0 > 0 > 0 > } > modeSpecificInfo: fdd ::= { > primaryCPICH-TX-Power: 10 > constantValue: -10 > prach-PowerOffset: PRACH-PowerOffset ::= { > powerRampStep: 1 > preambleRetransMax: 64 > } > rach-TransmissionParameters: RACH-TransmissionParameters > ::= { > mmax: 32 > nb01Min: 0 > nb01Max: 50 > } > aich-Info: AICH-Info ::= { > channelisationCode256: 2 > sttd-Indicator: FALSE > aich-TransmissionTiming: 1 (e1) > } > } > } > } > sCCPCH-SystemInformationList: SCCPCH-SystemInformationList ::= { > SCCPCH-SystemInformation ::= { > secondaryCCPCH-Info: SecondaryCCPCH-Info ::= { > modeSpecificInfo: fdd ::= { > dummy1: 0 (mayBeUsed) > sttd-Indicator: FALSE > sf-AndCodeNumber: 3 > pilotSymbolExistence: FALSE > tfci-Existence: TRUE > positionFixedOrFlexible: 0 (fixed) > timingOffset: 0 > } > } > tfcs: TFCS-ReconfAdd ::= { > ctfcSize: ctfc2Bit ::= { > TFCS-ReconfAdd-foo2 ::= { > ctfc2: 0 > } > TFCS-ReconfAdd-foo2 ::= { > ctfc2: 1 > } > } > } > fach-PCH-InformationList: FACH-PCH-InformationList ::= { > FACH-PCH-Information ::= { > transportFormatSet: CommonTransChTFS ::= { > tti: CommonDynamicTF-InfoList ::= { > CommonDynamicTF-Info ::= { > rlc-Size: fdd ::= { > octetModeRLC-SizeInfoType2: 3 > } > numberOfTbSizeList: numberOfTbSizeList ::= { > <present> > <present> > } > logicalChannelList: <present> > } > } > semistaticTF-Information: SemistaticTF-Information > ::= { > channelCodingType: 0 (half) > rateMatchingAttribute: 256 > crc-Size: 2 (crc12) > } > } > transportChannelIdentity: 1 > ctch-Indicator: FALSE > } > } > pich-Info: fdd ::= { > channelisationCode256: 4 > pi-CountPerFrame: 0 (e18) > sttd-Indicator: FALSE > } > } > SCCPCH-SystemInformation ::= { > secondaryCCPCH-Info: SecondaryCCPCH-Info ::= { > modeSpecificInfo: fdd ::= { > dummy1: 0 (mayBeUsed) > sttd-Indicator: FALSE > sf-AndCodeNumber: 2 > pilotSymbolExistence: FALSE > tfci-Existence: TRUE > positionFixedOrFlexible: 0 (fixed) > timingOffset: 0 > } > } > tfcs: TFCS-ReconfAdd ::= { > ctfcSize: ctfc2Bit ::= { > TFCS-ReconfAdd-foo2 ::= { > ctfc2: 0 > } > TFCS-ReconfAdd-foo2 ::= { > ctfc2: 1 > } > } > } > fach-PCH-InformationList: FACH-PCH-InformationList ::= { > FACH-PCH-Information ::= { > transportFormatSet: CommonTransChTFS ::= { > tti: CommonDynamicTF-InfoList ::= { > CommonDynamicTF-Info ::= { > rlc-Size: fdd ::= { > octetModeRLC-SizeInfoType2: 3 > } > numberOfTbSizeList: numberOfTbSizeList ::= { > <present> > <present> > } > logicalChannelList: <present> > } > } > semistaticTF-Information: SemistaticTF-Information > ::= { > channelCodingType: 0 (half) > rateMatchingAttribute: 256 > crc-Size: 2 (crc12) > } > } > transportChannelIdentity: 1 > ctch-Indicator: FALSE > } > } > } > } > } > SysInfoType11 ::= { > sib12indicator: FALSE > measurementControlSysInfo: MeasurementControlSysInfo ::= { > use-of-HCS: hcs-not-used ::= { > cellSelectQualityMeasure: cpich-Ec-N0 ::= { > } > } > } > }=== Phase1 Encoding SIB MIB > === Phase1 Encoded SIB MIB size 152 blocks 0.672566 > SIB0: bytes: ByteVector(size=19 data: 00 00 40 25 00 00 44 20 64 20 33 21 > 91 51 00 30 74 a0 3b) > === Phase1 Encoding SIB SIB1 > === Phase1 Encoded SIB SIB1 size 94 blocks 0.415929 > SIB1: bytes: ByteVector(size=12 data: c4 02 10 8b 20 00 01 00 ce 01 ab 40) > === Phase1 Encoding SIB SIB2 > === Phase1 Encoded SIB SIB2 size 20 blocks 0.0884956 > SIB2: bytes: ByteVector(size=3 data: 00 06 40) > === Phase1 Encoding SIB SIB3 > === Phase1 Encoded SIB SIB3 size 102 blocks 0.451327 > SIB3: bytes: ByteVector(size=13 data: 00 00 00 00 42 c0 60 00 04 b4 ff ff > fc) > === Phase1 Encoding SIB SIB5 > === Phase1 Encoded SIB SIB5 size 466 blocks 2.06195 > SIB4: bytes: ByteVector(size=59 data: 80 30 0e 88 00 00 f0 02 14 00 68 2c > 0a ff 60 00 32 3f de c7 fb 84 03 c0 00 00 fa 99 1f fc 0c 80 91 e0 40 d0 00 > 08 22 00 43 08 8b fd 00 04 18 08 12 00 01 04 40 08 61 11 7f a0 00) > === Phase1 Encoding SIB SIB7 > === Phase1 Encoded SIB SIB7 size 20 blocks 0.0884956 > SIB5: bytes: ByteVector(size=3 data: 4a 00 00) > === Phase1 Encoding SIB SIB11 > === Phase1 Encoded SIB SIB11 size 10 blocks 0.0442478 > SIB6: bytes: ByteVector(size=2 data: 01 00) > chReserve(256,0) > ALERT 3073120000 15:03:08.5 UMTSPhCh.cpp:654:chConflict: Attempt to > reserve channel: sf=256 chcode=0 which conflicts with reserved channel: > sf=128 chcode=0 > chReserve(256,1) > ALERT 3073120000 15:03:08.5 UMTSPhCh.cpp:654:chConflict: Attempt to > reserve channel: sf=256 chcode=1 which conflicts with reserved channel: > sf=128 chcode=0 > 1461265388.569272 3073120000: Starting the transceiver... > > linux; GNU C++ version 4.6.3; Boost_104601; UHD_003.009.003-release > > ** Configuring logger > ** Using internal clock reference > ** Searching for USRP device > -- Opening a USRP2/N-Series device... > -- Current recv frame size: 1472 bytes > -- Current send frame size: 1472 bytes > ** Device ready > RTNETLINK answers: File exists > 1461265394.437909 3073120000: > system ready > > 1461265394.437979 3073120000: > use the OpenBTS-UMTSCLI utility to access CLI > > > De : Daigle, Frédéric [mailto:fd...@cm...] > Envoyé : 21 avril 2016 12:34 > À : 'ope...@li...<mailto: > ope...@li...><mailto: > ope...@li...>' > Objet : [Openbts-discuss] OpenBTS-UMTS Success anyone? > > Hi all, > > I’m an OpenBTS (GSM) user and this week, I decided to give a try at the > UMTS version. > > I’ve started with a clean HDD, installed Ubuntu server 12.04.5 and then > followed the instructions here: > http://openbts.org/w/index.php?title=OpenBTS-UMTS > > After taking some hurdles I succeeded to “start openbts-umts” and open > “OpenBTS-UMTSCLI” > > Asterisk, Sipauthserve and SMQueue doesn’t seems to be installed. I guess > I will have to installed them eventually?! > > The bad news is that I can’t find my network with any of my phones…. > > My main questions are: > 1.Does anyone ever connected to OpenBTS-UMTS? > 2.Is there any tips and tricks about the setup? > 3.Is is better to install OpenBTS-UMTS on top of regular (GSM) OpenBTS or > on a new HDD? > > Thank you for your assistance! > Frédéric > > ------------------------------------------------------------------------------ > Find and fix application performance issues faster with Applications > Manager > Applications Manager provides deep performance insights into multiple > tiers of > your business applications. It resolves application problems quickly and > reduces your MTTR. Get your free trial! > https://ad.doubleclick.net/ddm/clk/302982198;130105516;z > _______________________________________________ > Openbts-discuss mailing list > Ope...@li...<mailto: > Ope...@li...> > https://lists.sourceforge.net/lists/listinfo/openbts-discuss > > > ------------------------------------------------------------------------------ > Find and fix application performance issues faster with Applications > Manager > Applications Manager provides deep performance insights into multiple > tiers of > your business applications. It resolves application problems quickly and > reduces your MTTR. Get your free trial! > https://ad.doubleclick.net/ddm/clk/302982198;130105516;z > _______________________________________________ > Openbts-discuss mailing list > Ope...@li... > https://lists.sourceforge.net/lists/listinfo/openbts-discuss > > > > ------------------------------------------------------------------------------ > Find and fix application performance issues faster with Applications > Manager > Applications Manager provides deep performance insights into multiple > tiers of > your business applications. It resolves application problems quickly and > reduces your MTTR. Get your free trial! > https://ad.doubleclick.net/ddm/clk/302982198;130105516;z > _______________________________________________ > Openbts-discuss mailing list > Ope...@li... > https://lists.sourceforge.net/lists/listinfo/openbts-discuss > > |
