Menu
▾
▴
Re: [Openbts-discuss] openbts with e310
|
From: Ekko <cha...@gm...> - 2016-04-05 12:45:49
|
my osmo-trx output these message WARNING 3040629840 12:37:18.5 Transceiver.cpp:852:driveControl: bogus command READFACTORY on control interface. NOTICE 3040629840 12:37:18.6 Transceiver.cpp:237:start: Starting the transceiver WARNING 3040629840 12:37:18.8 Transceiver.cpp:749:driveControl: NOHANDOVER at timeslot 0 subslot 0 WARNING 3040629840 12:37:18.8 Transceiver.cpp:749:driveControl: NOHANDOVER at timeslot 0 subslot 0 WARNING 3040629840 12:37:18.8 Transceiver.cpp:749:driveControl: NOHANDOVER at timeslot 0 subslot 0 WARNING 3040629840 12:37:18.8 Transceiver.cpp:749:driveControl: NOHANDOVER at timeslot 0 subslot 0 WARNING 3040629840 12:37:18.8 Transceiver.cpp:749:driveControl: NOHANDOVER at timeslot 0 subslot 0 WARNING 3040629840 12:37:18.9 Transceiver.cpp:749:driveControl: NOHANDOVER at timeslot 0 subslot 0 WARNING 3040629840 12:37:18.9 Transceiver.cpp:749:driveControl: NOHANDOVER at timeslot 0 subslot 0 WARNING 3040629840 12:37:18.9 Transceiver.cpp:749:driveControl: NOHANDOVER at timeslot 0 subslot 0 WARNING 3040629840 12:37:18.9 Transceiver.cpp:749:driveControl: NOHANDOVER at timeslot 0 subslot 0 WARNING 3040629840 12:37:19.0 Transceiver.cpp:749:driveControl: NOHANDOVER at timeslot 0 subslot 0 WARNING 3040629840 12:37:19.0 Transceiver.cpp:749:driveControl: NOHANDOVER at timeslot 0 subslot 0 WARNING 3040629840 12:37:19.0 Transceiver.cpp:749:driveControl: NOHANDOVER at timeslot 1 subslot 0 WARNING 3040629840 12:37:19.0 Transceiver.cpp:749:driveControl: NOHANDOVER at timeslot 1 subslot 0 is this normal? the warning --Ekko 2016-04-05 20:43 GMT+08:00 Ekko <cha...@gm...>: > i set the GSM.Identity.MNC to 01,and i can not connect to the gsm NETWORK > > 2016-04-05 20:34 GMT+08:00 Carlos Canet <cca...@gm...>: > >> Okey Ekko, then try to change parameter GSM.Identity.MNC 02 to 01 >> >> Regards >> >> Carlos. >> El 5/4/2016 14:14, "Ekko" <cha...@gm...> escribió: >> >>> i just want my cell phone connect to the GSM net work from openbts, and >>> from now ,i have installed >>> the openbts >>> Transceiver >>> Sipauthserver, >>> >>> is this ok? >>> i see the http://openbts.org/w/index.php?title=BuildInstallRun >>> i have set the Control.LUR.OpenRegistration to .* ,but i cannot connect >>> to the GSM network >>> >>> is there something i need to install. >>> >>> --Ekko >>> >>> 2016-04-05 20:08 GMT+08:00 Ekko <cha...@gm...>: >>> >>>> hello carlos >>>> i have create the OpenBTS.db in the /etc/OpenBTS >>>> and i found that the config of GSM.Identity.ShortName is Range >>>> is this mean that the network found on my cell phone should be >>>> Range?but my cell phone find the network is TETS PLMN 1-1 >>>> >>>> this is my config >>>> >>>> Control.GSMTAP.GPRS 0 [default] >>>> Control.GSMTAP.GSM 0 [default] >>>> Control.GSMTAP.TargetIP 127.0.0.1 [default] >>>> Control.LUR.404RejectCause 0x04 [default] >>>> Control.LUR.AttachDetach 1 [default] >>>> Control.LUR.FailMode ACCEPT [default] >>>> Control.LUR.FailedRegistration.Message Your handset is not provisioned >>>> for this network. [default] >>>> Control.LUR.FailedRegistration.ShortCode 1000 [default] >>>> Control.LUR.NormalRegistration.Message (disabled) [default] >>>> Control.LUR.NormalRegistration.ShortCode 0000 [default] >>>> Control.LUR.OpenRegistration .* >>>> Control.LUR.OpenRegistration.Message Welcome to the test network. Your >>>> IMSI is [default] >>>> Control.LUR.OpenRegistration.Reject (disable) >>>> Control.LUR.OpenRegistration.ShortCode 101 [default] >>>> Control.LUR.QueryClassmark 0 [default] >>>> Control.LUR.QueryIMEI 0 [default] >>>> Control.LUR.RegistrationMessageFrequency FIRST [default] >>>> Control.LUR.SendTMSIs 0 [default] >>>> Control.LUR.UnprovisionedRejectCause 0x04 [default] >>>> Control.Reporting.PhysStatusTable /var/run/ChannelTable.db [default] >>>> Control.Reporting.StatsTable /var/log/OpenBTSStats.db [default] >>>> Control.Reporting.TMSITable /var/run/TMSITable.db [default] >>>> Control.Reporting.TransactionTable /var/run/TransactionTable.db >>>> [default] >>>> Control.SMSCB.Table (disabled) [default] >>>> Control.TMSITable.MaxAge 576 [default] >>>> Control.VEA 0 [default] >>>> GGSN.DNS (disabled) [default] >>>> GGSN.Firewall.Enable 1 [default] >>>> GGSN.IP.TossDuplicatePackets 0 [default] >>>> GGSN.MS.IP.Base 192.168.99.1 [default] >>>> GGSN.MS.IP.MaxCount 254 [default] >>>> GGSN.MS.IP.Route (disabled) [default] >>>> GGSN.ShellScript (disabled) [default] >>>> GPRS.CellOptions.T3168Code 5 [default] >>>> GPRS.CellOptions.T3192Code 0 [default] >>>> GPRS.ChannelCodingControl.RSSI -40 [default] >>>> GPRS.Channels.Min.C0 2 [default] >>>> GPRS.Channels.Min.CN 0 [default] >>>> GPRS.Enable 0 [default] >>>> GPRS.LocalTLLI.Enable 1 [default] >>>> GPRS.Multislot.Max.Downlink 3 [default] >>>> GPRS.Multislot.Max.Uplink 2 [default] >>>> GPRS.NMO 2 [default] >>>> GPRS.RAC 0 [default] >>>> GPRS.RA_COLOUR 0 [default] >>>> GPRS.Reassign.Enable 1 [default] >>>> GPRS.TBF.EST 1 [default] >>>> GPRS.TBF.Retry 1 [default] >>>> GSM.BTS.RADIO_LINK_TIMEOUT 15 [default] >>>> GSM.CallerID.Source auto [default] >>>> GSM.CellOptions.RADIO-LINK-TIMEOUT 15 [default] >>>> GSM.CellSelection.CELL-RESELECT-HYSTERESIS 3 [default] >>>> GSM.CellSelection.NCCsPermitted 0 [default] >>>> GSM.CellSelection.NECI 1 [default] >>>> GSM.Channels.C1sFirst 0 [default] >>>> GSM.Channels.NumC1s auto [default] >>>> GSM.Channels.NumC7s auto [default] >>>> GSM.Channels.SDCCHReserve 0 [default] >>>> GSM.Cipher.CCHBER 0 [default] >>>> GSM.Cipher.Encrypt 0 [default] >>>> GSM.Cipher.RandomNeighbor 0 [default] >>>> GSM.Cipher.ScrambleFiller 0 [default] >>>> GSM.Handover.FailureHoldoff 20 [default] >>>> GSM.Handover.Margin 15 [default] >>>> GSM.Handover.Ny1 50 [default] >>>> GSM.Identity.BSIC.BCC 2 [default] >>>> GSM.Identity.BSIC.NCC 0 [default] >>>> GSM.Identity.CI 10 [default] >>>> GSM.Identity.LAC 1000 [default] >>>> GSM.Identity.MCC 001 [default] >>>> GSM.Identity.MNC 01 [default] >>>> GSM.Identity.ShortName Range [default] >>>> GSM.MS.Power.Damping 75 [default] >>>> GSM.MS.Power.Max 33 [default] >>>> GSM.MS.Power.Min 5 [default] >>>> GSM.MS.TA.Damping 50 [default] >>>> GSM.MS.TA.Max 62 [default] >>>> GSM.MaxSpeechLatency 2 [default] >>>> GSM.Neighbors (disabled) [default] >>>> GSM.Neighbors.NumToSend 31 [default] >>>> GSM.RACH.AC 0x0400 [default] >>>> GSM.RACH.MaxRetrans 1 [default] >>>> GSM.RACH.TxInteger 14 [default] >>>> GSM.Radio.ARFCNs 1 [default] >>>> GSM.Radio.Band 900 [default] >>>> GSM.Radio.C0 1 >>>> GSM.Radio.MaxExpectedDelaySpread 4 [default] >>>> GSM.Radio.PowerManager.MaxAttenDB 10 [default] >>>> GSM.Radio.PowerManager.MinAttenDB 0 [default] >>>> GSM.Radio.RSSITarget -50 [default] >>>> GSM.Radio.SNRTarget 10 [default] >>>> GSM.ShowCountry 0 [default] >>>> GSM.SpeechBuffer 1 [default] >>>> GSM.Timer.Handover.Holdoff 10 [default] >>>> GSM.Timer.T3109 30000 [default] >>>> GSM.Timer.T3212 0 [default] >>>> Log.Alarms.Max 20 [default] >>>> Log.Level NOTICE [default] >>>> Peering.Neighbor.RefreshAge 60 [default] >>>> Peering.NeighborTable.Path /var/run/NeighborTable.db [default] >>>> Peering.Port 16001 [default] >>>> RTP.Range 98 [default] >>>> RTP.Start 16484 [default] >>>> SIP.DTMF.RFC2833 1 [default] >>>> SIP.DTMF.RFC2833.PayloadType 101 [default] >>>> SIP.DTMF.RFC2976 0 [default] >>>> SIP.Local.IP 127.0.0.1 [default] >>>> SIP.Local.Port 5062 [default] >>>> SIP.Proxy.Registration 127.0.0.1:5064 [default] >>>> SIP.Proxy.SMS 127.0.0.1:5063 [default] >>>> SIP.Proxy.Speech 127.0.0.1:5060 [default] >>>> SIP.Proxy.USSD (disabled) [default] >>>> SIP.RFC3428.NoTrying 0 [default] >>>> SIP.SMSC smsc [default] >>>> SMS.FakeSrcSMSC 0000 [default] >>>> SMS.MIMEType application/vnd.3gpp.sms [default] >>>> TRX.IP 127.0.0.1 [default] >>>> OpenBTS> >>>> >>>> thank you >>>> >>>> --Ekko >>>> >>>> 2016-04-05 19:52 GMT+08:00 Carlos Canet <cca...@gm...>: >>>> >>>>> Hello Ekko, >>>>> >>>>> You have to configure OpenBTS, creating the OpenBTS.db , explained >>>>> here: http://openbts.org/w/index.php?title=BuildInstallRun >>>>> >>>>> Regards, >>>>> >>>>> Carlos. >>>>> >>>>> 2016-04-05 10:51 GMT+02:00 Ekko <cha...@gm...>: >>>>> >>>>>> hello all ,i followed the instruction here: >>>>>> http://openbts.org/w/index.php?title=E3x0 >>>>>> when i run the >>>>>> osmo-trx -f, >>>>>> i got >>>>>> linux; GNU C++ version 4.9.2; Boost_105700; >>>>>> UHD_003.010.git-156-g2d68f228 >>>>>> >>>>>> Config Settings >>>>>> Log Level............... NOTICE >>>>>> Device args............. >>>>>> TRX Base Port........... 5700 >>>>>> TRX Address............. 127.0.0.1 >>>>>> Channels................ 1 >>>>>> Tx Samples-per-Symbol... 1 >>>>>> EDGE support............ Disabled >>>>>> External Reference...... Disabled >>>>>> C0 Filler Table......... Dummy bursts >>>>>> Diversity............... Disabled >>>>>> Tuning offset........... 0 >>>>>> RSSI to dBm offset...... 0 >>>>>> Swap channels........... 0 >>>>>> >>>>>> -- Loading FPGA image: /usr/share/uhd/images/usrp_e310_fpga.bit... >>>>>> done >>>>>> -- Initializing core control... >>>>>> -- Performing register loopback test... pass >>>>>> -- Performing register loopback test... pass >>>>>> -- Performing register loopback test... pass >>>>>> -- Performing CODEC loopback test... pass >>>>>> -- Performing CODEC loopback test... pass >>>>>> -- Setting time source to internal >>>>>> -- Asking for clock rate 16 MHz >>>>>> -- Actually got clock rate 16 MHz >>>>>> -- Performing timer loopback test... pass >>>>>> -- Performing timer loopback test... pass >>>>>> -- Asking for clock rate 26 MHz >>>>>> -- Actually got clock rate 26 MHz >>>>>> -- Performing timer loopback test... pass >>>>>> -- Performing timer loopback test... pass >>>>>> -- Setting E3XX 1 SPS >>>>>> -- Transceiver active with 1 channel(s) >>>>>> >>>>>> then i run ./Openbts in the dir of Openbts/apps >>>>>> i got >>>>>> >>>>>> ALERT 13441:13441 2016-04-05T08:49:13.7 OpenBTS.cpp:595:main: OpenBTS >>>>>> (re)starting, ver 5.0-master build date/time 2016-04-02T03:18:48 >>>>>> ALERT 13441:13441 2016-04-05T08:49:13.7 OpenBTS.cpp:596:main: OpenBTS >>>>>> reading config file /etc/OpenBTS/OpenBTS.db >>>>>> 1459846153.731725 3070062592: >>>>>> >>>>>> OpenBTS >>>>>> Copyright 2008, 2009, 2010 Free Software Foundation, Inc. >>>>>> Copyright 2010 Kestrel Signal Processing, Inc. >>>>>> Copyright 2011, 2012, 2013, 2014 Range Networks, Inc. >>>>>> Release 5.0-master+e9bac710e3 CommonLibs:11d8baa826 P formal build >>>>>> date 2016-04-01T07:54:25 >>>>>> "OpenBTS" is a registered trademark of Range Networks, Inc. >>>>>> >>>>>> Contributors: >>>>>> Range Networks, Inc.: >>>>>> David Burgess, Harvind Samra, Donald Kirker, Doug Brown, >>>>>> Pat Thompson, Kurtis Heimerl, Michael Iedema, Dave Gotwisner >>>>>> Kestrel Signal Processing, Inc.: >>>>>> David Burgess, Harvind Samra, Raffi Sevlian, Roshan Baliga >>>>>> GNU Radio: >>>>>> Johnathan Corgan >>>>>> Others: >>>>>> Anne Kwong, Jacob Appelbaum, Joshua Lackey, Alon Levy >>>>>> Alexander Chemeris, Alberto Escudero-Pascual >>>>>> Incorporated L/GPL libraries and components: >>>>>> libortp, LGPL, 2.1 Copyright 2001 Simon MORLAT >>>>>> sim...@li... >>>>>> libusb, LGPL 2.1, various copyright holders, www.libusb.org >>>>>> libzmq, LGPL 3: >>>>>> Copyright (c) 2009-2011 250bpm s.r.o. >>>>>> Copyright (c) 2011 Botond Ballo >>>>>> Copyright (c) 2007-2009 iMatix Corporation >>>>>> Incorporated BSD/MIT-style libraries and components: >>>>>> A5/1 Pedagogical Implementation, Simplified BSD License, Copyright >>>>>> 1998-1999 Marc Briceno, Ian Goldberg, and David Wagner >>>>>> JsonBox, Copyright 2011 Anhero Inc. >>>>>> Google Core Dumper, BSD 3-Clause License, Copyright (c) 2005-2007, >>>>>> Google Inc. >>>>>> Incorporated public domain libraries and components: >>>>>> sqlite3, released to public domain 15 Sept 2001, www.sqlite.org >>>>>> >>>>>> >>>>>> This program comes with ABSOLUTELY NO WARRANTY. >>>>>> >>>>>> Use of this software may be subject to other legal restrictions, >>>>>> including patent licensing and radio spectrum licensing. >>>>>> All users of this software are expected to comply with applicable >>>>>> regulations and laws. See the LEGAL file in the source code for >>>>>> more information. >>>>>> >>>>>> Note to US Government Users: >>>>>> The OpenBTS software applications and associated documentation are >>>>>> "Commercial >>>>>> Item(s)," as that term is defined at 48 C.F.R. Section 2.101, >>>>>> consisting of >>>>>> "Commercial Computer Software" and "Commercial Computer Software >>>>>> Documentation," >>>>>> as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as >>>>>> applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. Sections >>>>>> 227.7202-1 >>>>>> through 227.7202-4, as applicable, the Commercial Computer Software >>>>>> and >>>>>> Commercial Computer Software Documentation are being licensed to >>>>>> U.S. Government >>>>>> end users (a) only as Commercial Items and (b) with only those >>>>>> rights as are >>>>>> granted to all other end users pursuant to the terms and conditions >>>>>> of >>>>>> Range Networks' software licenses and master customer agreement. >>>>>> >>>>>> >>>>>> 1459846153.890517 3070062592: >>>>>> Starting the system... >>>>>> 1459846154.528606 3070062592: >>>>>> system ready >>>>>> >>>>>> 1459846154.529512 3070062592: >>>>>> use the OpenBTSCLI utility to access CLI >>>>>> >>>>>> 1459846154.530466 3070062592: OpenBTSCLI network socket support for >>>>>> tcp:49300 >>>>>> >>>>>> OpenBTS> >>>>>> >>>>>> next is my config >>>>>> >>>>>> OpenBTS> config >>>>>> Control.GSMTAP.GPRS 0 [default] >>>>>> Control.GSMTAP.GSM 0 [default] >>>>>> Control.GSMTAP.TargetIP 127.0.0.1 [default] >>>>>> Control.LUR.404RejectCause 0x04 [default] >>>>>> Control.LUR.AttachDetach 1 [default] >>>>>> Control.LUR.FailMode ACCEPT [default] >>>>>> Control.LUR.FailedRegistration.Message Your handset is not >>>>>> provisioned for this network. [default] >>>>>> Control.LUR.FailedRegistration.ShortCode 1000 [default] >>>>>> Control.LUR.NormalRegistration.Message (disabled) [default] >>>>>> Control.LUR.NormalRegistration.ShortCode 0000 [default] >>>>>> Control.LUR.OpenRegistration .* >>>>>> Control.LUR.OpenRegistration.Message Welcome to the test network. >>>>>> Your IMSI is [default] >>>>>> Control.LUR.OpenRegistration.Reject (disable) >>>>>> Control.LUR.OpenRegistration.ShortCode 101 [default] >>>>>> Control.LUR.QueryClassmark 0 [default] >>>>>> Control.LUR.QueryIMEI 0 [default] >>>>>> Control.LUR.RegistrationMessageFrequency FIRST [default] >>>>>> Control.LUR.SendTMSIs 0 [default] >>>>>> Control.LUR.UnprovisionedRejectCause 0x04 [default] >>>>>> Control.Reporting.PhysStatusTable /var/run/ChannelTable.db >>>>>> [default] >>>>>> Control.Reporting.StatsTable /var/log/OpenBTSStats.db [default] >>>>>> Control.Reporting.TMSITable /var/run/TMSITable.db [default] >>>>>> Control.Reporting.TransactionTable /var/run/TransactionTable.db >>>>>> [default] >>>>>> Control.SMSCB.Table (disabled) [default] >>>>>> Control.TMSITable.MaxAge 576 [default] >>>>>> Control.VEA 0 [default] >>>>>> GGSN.DNS (disabled) [default] >>>>>> GGSN.Firewall.Enable 1 [default] >>>>>> GGSN.IP.TossDuplicatePackets 0 [default] >>>>>> GGSN.MS.IP.Base 192.168.99.1 [default] >>>>>> GGSN.MS.IP.MaxCount 254 [default] >>>>>> GGSN.MS.IP.Route (disabled) [default] >>>>>> GGSN.ShellScript (disabled) [default] >>>>>> GPRS.CellOptions.T3168Code 5 [default] >>>>>> GPRS.CellOptions.T3192Code 0 [default] >>>>>> GPRS.ChannelCodingControl.RSSI -40 [default] >>>>>> GPRS.Channels.Min.C0 2 [default] >>>>>> GPRS.Channels.Min.CN 0 [default] >>>>>> GPRS.Enable 0 [default] >>>>>> GPRS.LocalTLLI.Enable 1 [default] >>>>>> GPRS.Multislot.Max.Downlink 3 [default] >>>>>> GPRS.Multislot.Max.Uplink 2 [default] >>>>>> GPRS.NMO 2 [default] >>>>>> GPRS.RAC 0 [default] >>>>>> GPRS.RA_COLOUR 0 [default] >>>>>> GPRS.Reassign.Enable 1 [default] >>>>>> GPRS.TBF.EST 1 [default] >>>>>> GPRS.TBF.Retry 1 [default] >>>>>> GSM.BTS.RADIO_LINK_TIMEOUT 15 [default] >>>>>> GSM.CallerID.Source auto [default] >>>>>> GSM.CellOptions.RADIO-LINK-TIMEOUT 15 [default] >>>>>> GSM.CellSelection.CELL-RESELECT-HYSTERESIS 3 [default] >>>>>> GSM.CellSelection.NCCsPermitted 0 [default] >>>>>> GSM.CellSelection.NECI 1 [default] >>>>>> GSM.Channels.C1sFirst 0 [default] >>>>>> GSM.Channels.NumC1s auto [default] >>>>>> GSM.Channels.NumC7s auto [default] >>>>>> GSM.Channels.SDCCHReserve 0 [default] >>>>>> GSM.Cipher.CCHBER 0 [default] >>>>>> GSM.Cipher.Encrypt 0 [default] >>>>>> GSM.Cipher.RandomNeighbor 0 [default] >>>>>> GSM.Cipher.ScrambleFiller 0 [default] >>>>>> GSM.Handover.FailureHoldoff 20 [default] >>>>>> GSM.Handover.Margin 15 [default] >>>>>> GSM.Handover.Ny1 50 [default] >>>>>> GSM.Identity.BSIC.BCC 2 [default] >>>>>> GSM.Identity.BSIC.NCC 0 [default] >>>>>> GSM.Identity.CI 10 [default] >>>>>> GSM.Identity.LAC 1000 [default] >>>>>> GSM.Identity.MCC 001 [default] >>>>>> GSM.Identity.MNC 02 >>>>>> GSM.Identity.ShortName Range [default] >>>>>> GSM.MS.Power.Damping 75 [default] >>>>>> GSM.MS.Power.Max 33 [default] >>>>>> GSM.MS.Power.Min 5 [default] >>>>>> GSM.MS.TA.Damping 50 [default] >>>>>> GSM.MS.TA.Max 62 [default] >>>>>> GSM.MaxSpeechLatency 2 [default] >>>>>> GSM.Neighbors (disabled) [default] >>>>>> GSM.Neighbors.NumToSend 31 [default] >>>>>> GSM.RACH.AC 0x0400 [default] >>>>>> GSM.RACH.MaxRetrans 1 [default] >>>>>> GSM.RACH.TxInteger 14 [default] >>>>>> GSM.Radio.ARFCNs 1 [default] >>>>>> GSM.Radio.Band 900 [default] >>>>>> GSM.Radio.C0 51 [default] >>>>>> GSM.Radio.MaxExpectedDelaySpread 4 [default] >>>>>> GSM.Radio.PowerManager.MaxAttenDB 10 [default] >>>>>> GSM.Radio.PowerManager.MinAttenDB 0 [default] >>>>>> GSM.Radio.RSSITarget -50 [default] >>>>>> GSM.Radio.SNRTarget 10 [default] >>>>>> GSM.ShowCountry 0 [default] >>>>>> GSM.SpeechBuffer 1 [default] >>>>>> GSM.Timer.Handover.Holdoff 10 [default] >>>>>> GSM.Timer.T3109 30000 [default] >>>>>> GSM.Timer.T3212 0 [default] >>>>>> Log.Alarms.Max 20 [default] >>>>>> Log.Level NOTICE [default] >>>>>> Peering.Neighbor.RefreshAge 60 [default] >>>>>> Peering.NeighborTable.Path /var/run/NeighborTable.db [default] >>>>>> Peering.Port 16001 [default] >>>>>> RTP.Range 98 [default] >>>>>> RTP.Start 16484 [default] >>>>>> SIP.DTMF.RFC2833 1 [default] >>>>>> SIP.DTMF.RFC2833.PayloadType 101 [default] >>>>>> SIP.DTMF.RFC2976 0 [default] >>>>>> SIP.Local.IP 127.0.0.1 [default] >>>>>> SIP.Local.Port 5062 [default] >>>>>> SIP.Proxy.Registration 127.0.0.1:5064 [default] >>>>>> SIP.Proxy.SMS 127.0.0.1:5063 [default] >>>>>> SIP.Proxy.Speech 127.0.0.1:5060 [default] >>>>>> SIP.Proxy.USSD (disabled) [default] >>>>>> SIP.RFC3428.NoTrying 0 [default] >>>>>> SIP.SMSC smsc [default] >>>>>> SMS.FakeSrcSMSC 0000 [default] >>>>>> SMS.MIMEType application/vnd.3gpp.sms [default] >>>>>> TRX.IP 127.0.0.1 [default] >>>>>> OpenBTS> >>>>>> >>>>>> >>>>>> my problem is :my cell phone can find the 00101,but can not connect >>>>>> to this network >>>>>> is there something wrong in my work?or i need to modify the config ? >>>>>> >>>>>> >>>>>> thank you >>>>>> >>>>>> --Ekko >>>>>> >>>>>> >>>>>> ------------------------------------------------------------------------------ >>>>>> >>>>>> _______________________________________________ >>>>>> Openbts-discuss mailing list >>>>>> Ope...@li... >>>>>> https://lists.sourceforge.net/lists/listinfo/openbts-discuss >>>>>> >>>>>> >>>>> >>>> >>> > |
