Re: [Openbts-discuss] openbts with e310

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

Hello Ekko,

You have to configure OpenBTS, creating the OpenBTS.db , explained here:
http://openbts.org/w/index.php?title=BuildInstallRun

Regards,

Carlos.

2016-04-05 10:51 GMT+02:00 Ekko <cha...@gm...>:

> hello all ,i followed the instruction here:
> http://openbts.org/w/index.php?title=E3x0
> when i run the
> osmo-trx -f,
> i got
> linux; GNU C++ version 4.9.2; Boost_105700; UHD_003.010.git-156-g2d68f228
>
> Config Settings
>    Log Level............... NOTICE
>    Device args.............
>    TRX Base Port........... 5700
>    TRX Address............. 127.0.0.1
>    Channels................ 1
>    Tx Samples-per-Symbol... 1
>    EDGE support............ Disabled
>    External Reference...... Disabled
>    C0 Filler Table......... Dummy bursts
>    Diversity............... Disabled
>    Tuning offset........... 0
>    RSSI to dBm offset...... 0
>    Swap channels........... 0
>
> -- Loading FPGA image: /usr/share/uhd/images/usrp_e310_fpga.bit... done
> -- Initializing core control...
> -- Performing register loopback test... pass
> -- Performing register loopback test... pass
> -- Performing register loopback test... pass
> -- Performing CODEC loopback test... pass
> -- Performing CODEC loopback test... pass
> -- Setting time source to internal
> -- Asking for clock rate 16 MHz
> -- Actually got clock rate 16 MHz
> -- Performing timer loopback test... pass
> -- Performing timer loopback test... pass
> -- Asking for clock rate 26 MHz
> -- Actually got clock rate 26 MHz
> -- Performing timer loopback test... pass
> -- Performing timer loopback test... pass
> -- Setting E3XX 1 SPS
> -- Transceiver active with 1 channel(s)
>
> then i run ./Openbts in the dir of Openbts/apps
> i got
>
> ALERT 13441:13441 2016-04-05T08:49:13.7 OpenBTS.cpp:595:main: OpenBTS
> (re)starting, ver 5.0-master build date/time 2016-04-02T03:18:48
> ALERT 13441:13441 2016-04-05T08:49:13.7 OpenBTS.cpp:596:main: OpenBTS
> reading config file /etc/OpenBTS/OpenBTS.db
> 1459846153.731725 3070062592:
>
> OpenBTS
> Copyright 2008, 2009, 2010 Free Software Foundation, Inc.
> Copyright 2010 Kestrel Signal Processing, Inc.
> Copyright 2011, 2012, 2013, 2014 Range Networks, Inc.
> Release 5.0-master+e9bac710e3 CommonLibs:11d8baa826 P formal build date
> 2016-04-01T07:54:25
> "OpenBTS" is a registered trademark of Range Networks, Inc.
>
> Contributors:
>   Range Networks, Inc.:
>     David Burgess, Harvind Samra, Donald Kirker, Doug Brown,
>     Pat Thompson, Kurtis Heimerl, Michael Iedema, Dave Gotwisner
>   Kestrel Signal Processing, Inc.:
>     David Burgess, Harvind Samra, Raffi Sevlian, Roshan Baliga
>   GNU Radio:
>     Johnathan Corgan
>   Others:
>     Anne Kwong, Jacob Appelbaum, Joshua Lackey, Alon Levy
>     Alexander Chemeris, Alberto Escudero-Pascual
> Incorporated L/GPL libraries and components:
>   libortp, LGPL, 2.1 Copyright 2001 Simon MORLAT sim...@li...
>   libusb, LGPL 2.1, various copyright holders, www.libusb.org
>   libzmq, LGPL 3:
>       Copyright (c) 2009-2011 250bpm s.r.o.
>       Copyright (c) 2011 Botond Ballo
>       Copyright (c) 2007-2009 iMatix Corporation
> Incorporated BSD/MIT-style libraries and components:
>   A5/1 Pedagogical Implementation, Simplified BSD License, Copyright
> 1998-1999 Marc Briceno, Ian Goldberg, and David Wagner
>   JsonBox, Copyright 2011 Anhero Inc.
>   Google Core Dumper, BSD 3-Clause License, Copyright (c) 2005-2007,
> Google Inc.
> Incorporated public domain libraries and components:
>   sqlite3, released to public domain 15 Sept 2001, www.sqlite.org
>
>
> This program comes with ABSOLUTELY NO WARRANTY.
>
> Use of this software may be subject to other legal restrictions,
> including patent licensing and radio spectrum licensing.
> All users of this software are expected to comply with applicable
> regulations and laws.  See the LEGAL file in the source code for
> more information.
>
> Note to US Government Users:
>  The OpenBTS software applications and associated documentation are
> "Commercial
>  Item(s)," as that term is defined at 48 C.F.R. Section 2.101, consisting
> of
>  "Commercial Computer Software" and "Commercial Computer Software
> Documentation,"
>  as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as
>  applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. Sections
> 227.7202-1
>  through 227.7202-4, as applicable, the Commercial Computer Software and
>  Commercial Computer Software Documentation are being licensed to U.S.
> Government
>  end users (a) only as Commercial Items and (b) with only those rights as
> are
>  granted to all other end users pursuant to the terms and conditions of
>  Range Networks' software licenses and master customer agreement.
>
>
> 1459846153.890517 3070062592:
> Starting the system...
> 1459846154.528606 3070062592:
> system ready
>
> 1459846154.529512 3070062592:
> use the OpenBTSCLI utility to access CLI
>
> 1459846154.530466 3070062592: OpenBTSCLI network socket support for
> tcp:49300
>
> OpenBTS>
>
> next is my config
>
> OpenBTS> config
> Control.GSMTAP.GPRS 0     [default]
> Control.GSMTAP.GSM 0     [default]
> Control.GSMTAP.TargetIP 127.0.0.1     [default]
> Control.LUR.404RejectCause 0x04     [default]
> Control.LUR.AttachDetach 1     [default]
> Control.LUR.FailMode ACCEPT     [default]
> Control.LUR.FailedRegistration.Message Your handset is not provisioned for
> this network.      [default]
> Control.LUR.FailedRegistration.ShortCode 1000     [default]
> Control.LUR.NormalRegistration.Message (disabled)     [default]
> Control.LUR.NormalRegistration.ShortCode 0000     [default]
> Control.LUR.OpenRegistration .*
> Control.LUR.OpenRegistration.Message Welcome to the test network.  Your
> IMSI is      [default]
> Control.LUR.OpenRegistration.Reject (disable)
> Control.LUR.OpenRegistration.ShortCode 101     [default]
> Control.LUR.QueryClassmark 0     [default]
> Control.LUR.QueryIMEI 0     [default]
> Control.LUR.RegistrationMessageFrequency FIRST     [default]
> Control.LUR.SendTMSIs 0     [default]
> Control.LUR.UnprovisionedRejectCause 0x04     [default]
> Control.Reporting.PhysStatusTable /var/run/ChannelTable.db     [default]
> Control.Reporting.StatsTable /var/log/OpenBTSStats.db     [default]
> Control.Reporting.TMSITable /var/run/TMSITable.db     [default]
> Control.Reporting.TransactionTable /var/run/TransactionTable.db
> [default]
> Control.SMSCB.Table (disabled)     [default]
> Control.TMSITable.MaxAge 576     [default]
> Control.VEA 0     [default]
> GGSN.DNS (disabled)     [default]
> GGSN.Firewall.Enable 1     [default]
> GGSN.IP.TossDuplicatePackets 0     [default]
> GGSN.MS.IP.Base 192.168.99.1     [default]
> GGSN.MS.IP.MaxCount 254     [default]
> GGSN.MS.IP.Route (disabled)     [default]
> GGSN.ShellScript (disabled)     [default]
> GPRS.CellOptions.T3168Code 5     [default]
> GPRS.CellOptions.T3192Code 0     [default]
> GPRS.ChannelCodingControl.RSSI -40     [default]
> GPRS.Channels.Min.C0 2     [default]
> GPRS.Channels.Min.CN 0     [default]
> GPRS.Enable 0     [default]
> GPRS.LocalTLLI.Enable 1     [default]
> GPRS.Multislot.Max.Downlink 3     [default]
> GPRS.Multislot.Max.Uplink 2     [default]
> GPRS.NMO 2     [default]
> GPRS.RAC 0     [default]
> GPRS.RA_COLOUR 0     [default]
> GPRS.Reassign.Enable 1     [default]
> GPRS.TBF.EST 1     [default]
> GPRS.TBF.Retry 1     [default]
> GSM.BTS.RADIO_LINK_TIMEOUT 15     [default]
> GSM.CallerID.Source auto     [default]
> GSM.CellOptions.RADIO-LINK-TIMEOUT 15     [default]
> GSM.CellSelection.CELL-RESELECT-HYSTERESIS 3     [default]
> GSM.CellSelection.NCCsPermitted 0     [default]
> GSM.CellSelection.NECI 1     [default]
> GSM.Channels.C1sFirst 0     [default]
> GSM.Channels.NumC1s auto     [default]
> GSM.Channels.NumC7s auto     [default]
> GSM.Channels.SDCCHReserve 0     [default]
> GSM.Cipher.CCHBER 0     [default]
> GSM.Cipher.Encrypt 0     [default]
> GSM.Cipher.RandomNeighbor 0     [default]
> GSM.Cipher.ScrambleFiller 0     [default]
> GSM.Handover.FailureHoldoff 20     [default]
> GSM.Handover.Margin 15     [default]
> GSM.Handover.Ny1 50     [default]
> GSM.Identity.BSIC.BCC 2     [default]
> GSM.Identity.BSIC.NCC 0     [default]
> GSM.Identity.CI 10     [default]
> GSM.Identity.LAC 1000     [default]
> GSM.Identity.MCC 001     [default]
> GSM.Identity.MNC 02
> GSM.Identity.ShortName Range     [default]
> GSM.MS.Power.Damping 75     [default]
> GSM.MS.Power.Max 33     [default]
> GSM.MS.Power.Min 5     [default]
> GSM.MS.TA.Damping 50     [default]
> GSM.MS.TA.Max 62     [default]
> GSM.MaxSpeechLatency 2     [default]
> GSM.Neighbors (disabled)     [default]
> GSM.Neighbors.NumToSend 31     [default]
> GSM.RACH.AC 0x0400     [default]
> GSM.RACH.MaxRetrans 1     [default]
> GSM.RACH.TxInteger 14     [default]
> GSM.Radio.ARFCNs 1     [default]
> GSM.Radio.Band 900     [default]
> GSM.Radio.C0 51     [default]
> GSM.Radio.MaxExpectedDelaySpread 4     [default]
> GSM.Radio.PowerManager.MaxAttenDB 10     [default]
> GSM.Radio.PowerManager.MinAttenDB 0     [default]
> GSM.Radio.RSSITarget -50     [default]
> GSM.Radio.SNRTarget 10     [default]
> GSM.ShowCountry 0     [default]
> GSM.SpeechBuffer 1     [default]
> GSM.Timer.Handover.Holdoff 10     [default]
> GSM.Timer.T3109 30000     [default]
> GSM.Timer.T3212 0     [default]
> Log.Alarms.Max 20     [default]
> Log.Level NOTICE     [default]
> Peering.Neighbor.RefreshAge 60     [default]
> Peering.NeighborTable.Path /var/run/NeighborTable.db     [default]
> Peering.Port 16001     [default]
> RTP.Range 98     [default]
> RTP.Start 16484     [default]
> SIP.DTMF.RFC2833 1     [default]
> SIP.DTMF.RFC2833.PayloadType 101     [default]
> SIP.DTMF.RFC2976 0     [default]
> SIP.Local.IP 127.0.0.1     [default]
> SIP.Local.Port 5062     [default]
> SIP.Proxy.Registration 127.0.0.1:5064     [default]
> SIP.Proxy.SMS 127.0.0.1:5063     [default]
> SIP.Proxy.Speech 127.0.0.1:5060     [default]
> SIP.Proxy.USSD (disabled)     [default]
> SIP.RFC3428.NoTrying 0     [default]
> SIP.SMSC smsc     [default]
> SMS.FakeSrcSMSC 0000     [default]
> SMS.MIMEType application/vnd.3gpp.sms     [default]
> TRX.IP 127.0.0.1     [default]
> OpenBTS>
>
>
> my problem is :my cell phone can find the 00101,but can not connect to
> this network
> is there something wrong in my work?or i need to modify the config ?
>
>
> thank you
>
> --Ekko
>
>
> ------------------------------------------------------------------------------
>
> _______________________________________________
> Openbts-discuss mailing list
> Ope...@li...
> https://lists.sourceforge.net/lists/listinfo/openbts-discuss
>
>

Re: [Openbts-discuss] openbts with e310

GSM L1-L3 stack with SIP network interfaces

Re: [Openbts-discuss] openbts with e310